WISMEC Reuleaux RX200 TC
- Thread starter USMCotaku
- Start date
- th_trl_thread_readers 0
- Status
I'll have to go out and get another one this weekend seemed to have lost mine.
Any mods that I have with removable batteries never get charged on board period. I just pop them into my xtar VP4 for charging. After a full charge my RX wasn't as inaccurate as what you're showing. I had 4.24 4.19 4.21 showing on mine.
Just pulled my VTC4's out to check them on a multimeter and an inline volt meter 3.8, 3.8 and 3.8.
Not bad.
Not bad.
I've never gotten really dirty, but I did give it a good cleaning yesterday and still the same. Anyway, I'm just going to leave this here:
Update on RX200 510 issue. Wismec responds. • /r/electronic_cigarette
I don't understand why they couldn't have just spent the pennies to put a decent 510 on this thing to begin with. Anyway, I think I'm done with all these Chinese mods and am going to put together my own dna200. At least I know the quality of the device will be solid.
Has anyone gotten their hands on the new Red RX200? Any differences such as a better 510 connection?
I'm going to charge my batteries soon, so I'll edit this with the correct voltages my batteries are at, but the voltmeter on the RX200 is a bipolar one. It ranges from showing evenly like that, to showing a 0.13 difference, never goes above 0.13 though. Right now they're 3.55, 3.44, 3.56. Just did it again and it changed to 3.56, 3.43, 3.56. You really can't trust the RX200
Edit: Batteries were within 0.03 of each other.
Last edited:
Not the red one, but did get a new matte white and its pretty solid. this is my first rx so i have nothing to compare it to. i have only used my mt-rta, griffin, mutation v4s, and mutation xs atties on it with no problems.
As far as I know, they're exactly the same besides the colored paneling. Any variation in better 510 connection and other things are due to a better or worse put together product as I'm sure these are mass produced in a factory and some are bound to come out slightly wonky. My black RX200's front panel is slightly inward on the bottom left side, as long as it functions fine though, that's all I care about.
Mine should be in my mailbox as we speak! I'll let you guys know!
I literally ordered and received my black RX200 a few days after I saw the announcements on the new color variations for the mod. You could imagine my facepalming, because that red on black is classy
I literally ordered and received my black RX200 a few days after I saw the announcements on the new color variations for the mod. You could imagine my facepalming, because that red on black is classy
I'm looking hard at the red and black one because...a) it's the colors of my alma mater...b) I need a mod for all those 25mm tanks I'm coveting and c) I have shineyitis.
I'm looking hard at the red and black one because...a) it's the colors of my alma mater...b) I need a mod for all those 25mm tanks I'm coveting and c) I have shineyitis.
It's a fantastic mod besides for the integrated voltmeter and onboard charging, I love mine and don't see myself buying any other mod for it anytime soon
I may buy an RBA for it though, after I get all this DIY'ing stuff together and start that. I like the idea of not having to spend $2.50 per coil!
the real reason? C....always CI'm looking hard at the red and black one because...a) it's the colors of my alma mater...b) I need a mod for all those 25mm tanks I'm coveting and c) I have shineyitis.
I saw a pic of someone turning one into a bottom feeder. To do so they removed one of the three batteries....I am wondering how they made it run on only two
I saw a pic of someone turning one into a bottom feeder. To do so they removed one of the three batteries....I am wondering how they made it run on only two
They used the DNA 200 board which will run on two batteries but at 133w which is a function of the DNA. No one (that I have seen) has used the RX200 board.
The 510 connector still sucks.
In fact mine is so bad I'm debating on either sending it back for a replacement or replacing the 510 connector myself. Since it's only a few days old I'm tempted to send it back, but I'm afraid that the next one I got would be just as bad. I love the rest of the mod, but the 510 in mine is only 3.25mm deep, and none of the atomizers I own sit flush in it. (If you look close you'll notice that I'm using a neoprene washer under the tank) The pin in the connector seems to be leaning and there is very little travel on the spring.
I'm very seriously considering getting a black low profile 510 connector and swapping it out.
I'm going to charge my batteries soon, so I'll edit this with the correct voltages my batteries are at, but the voltmeter on the RX200 is a bipolar one. It ranges from showing evenly like that, to showing a 0.13 difference, never goes above 0.13 though. Right now they're 3.55, 3.44, 3.56. Just did it again and it changed to 3.56, 3.43, 3.56. You really can't trust the RX200
Edit: Batteries were within 0.03 of each other.
Yep put them on the charger and they were.01 from each other so the discharge is fine but like you said the onboard voltmeter is shiiiieeeeeeeeettt.
By the way anyone wanting to buy an RX200 fasttech is having a store wide 10% off over easter think I'm gonna get the white one! Brings it down to about $36.50 it's to good to pass up and get another one for that price.
- Status
Similar threads
