Tube mod with a 510 connector on one end and a 901 on the other. Recess the connectors a little bit so it will stand on either end when the other end is in use.
- Status
I cannot bring myself to unscrew the top cap right now as I am about 1000 miles from my real tools and another buzz or two, but if there is height in the tube above the PCB and room to thread deeper a fully inserted cap (with the wire hooked to it) into the tube put in with a spanner wrench would work then just screw on a upper cap with just pin on the bottom. The upper cap could be the one that changes the lower cap would never come out unless repairs were needed and if the lower cap was sealed it would give more protection for the poor PCB and wire from juice. This makes sense in my mind but that is a dangerous place. Ruppy does this make sense?
Make it a 26650 mod with a 510 next to an 901 on one side and an 801 next to an 808-d on the other. Keep it 4 inches long and call it the 4X4.
I don't own anything but 510 stuff any more, but I'd try those bloog cartos if I had an 808... and there are some really loyal 901 people around that make me wonder if I'm missing something.
Probably right about not being able to sell it to very many people. That would be a heck of a gadget for some of the video reviewers to have especially if it was VV, though. It would end up being about the only device you'd ever see in a carto or atty review.
What I would suggest 1) a rebuildable dripping atty, think Bulli a2, but especially for the notcigs vvprov, with a hole in just the right place to drip directly onto the coil. Maybe it could have an internal ss tube to carry the juice up, that would be very clean looking. 2) obviously, after perfecting the above atty, which I would certainly help beta test, a tank version should probably be created for the bp and such. :thumbup:
Also, we don't need any more screens in our lives. I bought the second best electronic toothbrush because the better one had a screen telling me when to stop brushing!
Also, we don't need any more screens in our lives. I bought the second best electronic toothbrush because the better one had a screen telling me when to stop brushing!
Last edited:
LOL about the screen !! we have something in the works for an atty BTW
Ok, so I have a Mark-t rebuild-able coming. Now I just need my shipping notice. feels like a year ago that i first pre-ordered this thing, can you imagine if we had to do this with cigarettes... two pre-order lists etc... I would have quit smoking before the internet was created/evolved.
Mike ~ Have you thought about coming out w/some new colors for the IPro, like you did w/the BPro?? Love that new blue and root beer. Would really love em on an Ipro! 
I know like you don't have enough that you're already doing
I know like you don't have enough that you're already doing
Keep in mind that I do not yet out a Buzz/Infinity Pro but they are on my short list. Now it seems that the button size keeps coming up. Could the body be made to accept say a rubber button that would cover the existing switch button?
This would allow you to keep the existing button but the rubber button cover would disperse the load under one's finger.
This would allow you to keep the existing button but the rubber button cover would disperse the load under one's finger.
Sounds like there is enough interest in eGo adapters and anodized drip tips .... See them on the site soon?
How about a drip shield for the vvpv that would have a feed hole for the drip tube then you can use any DT you wanted. Might be a little longer but it would be nice. Have a little gap between the top of the atty for the tube the the DT on top!
Hummmm once I get it sorted out this is not a bad idea !!!
I have soo much on my plate right now It will be a while !!!
Mike ~ Have you thought about coming out w/some new colors for the IPro, like you did w/the BPro?? Love that new blue and root beer. Would really love em on an Ipro!
I know like you don't have enough that you're already doing
no plans at this time sorry ! when we get close to a reorder I will look into it ok ?
Here is a great idea....
Self tapping tank....
You include a 2nd screw, made of a hard metal, with a point on it. You slide the carto in upsidedown, screw in the metal point until it pierces the carto, remove the metal screw, flip the carto in the tank, fill, and install the plastic screw.
Only concern would be, can the tube take the stress that would put on it? I have seen videos of someone beating the piss out of it with a hammer....
The problem with the saddle valve, is that you cannot see the carto getting punched, and cannot be compeletely sure it is pierced, if it isn't, then it is a PAIN to get it lined back up to try again, in the same place.
If that doesn't work, what about making something similar to the saddle valve, but it is visible while punching... I'd pay $10 for that!
Self tapping tank....
You include a 2nd screw, made of a hard metal, with a point on it. You slide the carto in upsidedown, screw in the metal point until it pierces the carto, remove the metal screw, flip the carto in the tank, fill, and install the plastic screw.
Only concern would be, can the tube take the stress that would put on it? I have seen videos of someone beating the piss out of it with a hammer....
The problem with the saddle valve, is that you cannot see the carto getting punched, and cannot be compeletely sure it is pierced, if it isn't, then it is a PAIN to get it lined back up to try again, in the same place.
If that doesn't work, what about making something similar to the saddle valve, but it is visible while punching... I'd pay $10 for that!
- Status
Similar threads
- Locked
