ZFM Zero Filler Mod
- Thread starter SCOTTYBALLS
- Start date
- th_trl_thread_readers 0
- Status
The cart actually pulls vapor threw 2 side vents. The vapor dose not actually pull threw the center of the cart.. not like a ciggerette filter..
just tried making one from my 4081 cart, it's very different, the silicone plug is a lot thicker, and i managed to cut it quite well with some scissors, it was too thick to punch a hole, but i had to perforate it with a needle and then tear the line.
will update on whether it works in the next couple of days.
will update on whether it works in the next couple of days.
ehh... i just wish the overall quality and specifications of e-cigs were a little bit more consistent
thanks anyways scotty.
All I have to say is thank you for this idea, has made my vaping experience a whole lot better. 
Tried making these and couldn't get them just right so I ordered some from Scotty. Holy ***! Worked perfectly right away and I couldn't be happier I've tried other cart mods and nothing seemed to keep the atty wet enough for my chain vaping habit without leaking all over. Thanks Scotty!
This was recommended to me on another thread and I just went ahead and ordered it on Monday, I was shocked to find it in the mailbox today... but since I also discovered that Scotty's only 15 miles from me it's no real shocker after all.
I took one look at the contents of the box and thought "yeah, this is gonna work, I'll be soaked in juice in 30 seconds".
To my stunned amazement it's actually working!
My wife is gonna flip out. Huzzah!
I took one look at the contents of the box and thought "yeah, this is gonna work, I'll be soaked in juice in 30 seconds".
To my stunned amazement it's actually working!
My wife is gonna flip out. Huzzah!
LOL I did not even notice that.. I do so many orders now I just hit the print label button and away to the mail box the package go's
tried this myself a month ago and it was great but messy. been dripping since. but i just put in a order to see how these are. i have high hopes!
Well it was working great until a couple days ago now no matter what I do I'm getting juice absolutely streaming into my mouth. I don't think I'm doing anything differently, I fill my carts and my wife's carts. Her's are still working perfectly, mine are a disaster no matter what I try.
I've changed carts, plugs, atomizers and every single time I take a drag I get a stream of juice. Mega cart/mega atomizer, standard cart/standard atty, standard cart/LR atty, nothing makes a difference.
I can't understand it, it was perfect for me for about a week and it's still doing great for my wife.
[update: I've been using the "H-cut" plugs and remembered I'd ordered the other type at the same time. I'm trying one and so far it's working. What I can't understand is why the Hs worked so well and then flopped.]
[update update: fail. mouth full of juice. I've probably got more juice on my desk towel than I've managed to vape in the last several days, it's actually damp.]
I've changed carts, plugs, atomizers and every single time I take a drag I get a stream of juice. Mega cart/mega atomizer, standard cart/standard atty, standard cart/LR atty, nothing makes a difference.
I can't understand it, it was perfect for me for about a week and it's still doing great for my wife.
[update: I've been using the "H-cut" plugs and remembered I'd ordered the other type at the same time. I'm trying one and so far it's working. What I can't understand is why the Hs worked so well and then flopped.]
[update update: fail. mouth full of juice. I've probably got more juice on my desk towel than I've managed to vape in the last several days, it's actually damp.]
Last edited:
I just ordered 10 H cut and 10 hole cuts. This mod looks promising. Thanks Scottyballs!!!
I have been watching this for a long time, I tried to make my own with no success. So I ordered from you, got them today and they work great. I want to thank you for coming up with this idea, and then offering them for sale to those of us that can't do the mod on our own. THANK YOU SCOTTY.
It can happen.. trim the straw slightly just a hair at a time.. eventually you will get to a point where the bridge dose not open the doors of the H at all and you will dry out the atty.. also make sure the bridge is dead set in the middle if its not you can push it to the center with a toothpick.. I cut the H close to the center as I can so the bridge must be centerd too or it will leave a gap for juice to flow out of.. the key is to get the bridge to seal up the hole..that way the bridge can wet itself..
Last edited:
No problem its really not as easy as it looks to do it and get it right, but after a couple thousand plugs Im getting better..
Ahah, I'll check the bridges on the two attys I'm using, that makes sense, thanks!
I've been watching this thread too. i tried it . w/ moderate success (except for vapor locking) so i've kind of modded the mod...lol to stop the vapor locking and a thicker material that i like - i've had mixed results from the feedback from other ppl so far though.
basically though i took a thicker source of prefab silicone to make plugs from and added an air vent and have made these for 901's (my first/main PV as i'm still new-ish) 510's and thanks to someone else on ECF wanting to try them and be my guinea pig - 801's. i'm still perfecting my cuts, but i'm slowly getting there
i just don't know if it should b considered a different mod since it's based off of ur work or not, therefore, don't know what to call it...lol
basically though i took a thicker source of prefab silicone to make plugs from and added an air vent and have made these for 901's (my first/main PV as i'm still new-ish) 510's and thanks to someone else on ECF wanting to try them and be my guinea pig - 801's. i'm still perfecting my cuts, but i'm slowly getting there
i just don't know if it should b considered a different mod since it's based off of ur work or not, therefore, don't know what to call it...lol
No problem its really not as easy as it looks to do it and get it right, but after a couple thousand plugs Im getting better..
Just found this thread - about a year late !
Impressed with the idea, even though it obviously needs tweaking for each case.
Is there a diagram in these 100 pages somewhere that shows what the straw is for?
- Status
Similar threads
