Vandy Vape PR(Pulse with Requiem) SE BF Kit is the collaboration between Vandy Vape & Tony B (Pluse SE) & El Mono Vapeador(Requiem RDA). It's a combination of all the previous Pulse Mods with a bigger bottle, better lines and lots of other improvements. Constructed of lightweight Nylon and ABS, the Pulse V2 BF Box Mod features a compact and ergonomic design, incorporating the same waterproof technology from the Swell Mod. The battery compartment is compatible with a single 21700, 20700, or 18650 battery (with included adapter). Vandy Vape creates an excellent bottom fill system for the bottle, which keeps it locked in place and directly in line with the 510 to eliminate potential issues with the plumbing inside the mod to transfer juice from one side to the other. Vandy Vape Pulse V2 BF Mod is powered by an upgraded Vandy chip with max power 95W and provides multiple modes for your option, such as Power Mode, Bypass Mode, Voltage Mode, TC-NI Mode, TC-SS Mode and TC-TI Mode. With our waterproof PCBA , it is so easy to clean your box mod， Easy to remove E-juice stain and dust For a situation that your device was accidentally stained by jam butter , Brine , Juice , fume or dust . All you need do is to take off the battery and feel free to wash your device in whatever way.





Features:
1. Single coil.
2. Three drip tips.
3. Three air settings - DL / RDL / MTL.
4. 22mm-Beauty ring 24 mm.
5. Waterproof Chip / PCB.
6. Life Proof Design.
7. Super Durable ABS Nylon.
8. Refined Shape And Ergonomics.
9. 21700, 20700, or 18650 compatible.
10. Bottom Fill Bottle Keeping It Directly In Line With 510.
...

Click here for more:

Vandy Vape PR SE Kit: Vandy Vape PR SE Mod Kit | Healthcabin

https://www.2fdeal.com/search/?Keyword=MDura+&CateId=Wotofo MDura Mini 80W VW 18650 Box Mod

Features
Display: 0.96 Inch TFT screen
High-calss leather wrap
Supports 0.001s firing speed with nexCHIP
Battery Type: Single 18650 battery (not included)
Resistance Range: 0.10ohm~2.50ohm
Power Range: 5W~80W
Charging Port: Type-C 2A fast charging
Charging Current: DC 5V / 2A
Compact side-by-side appearance.


https://www.2fdeal.com/5avape-four-one-five-415-s61-v2-genesis-22mm-rta-3ml-silver_p16671.html$27.9 5Avape Four One Five 415 S61 V2 Genesis 22mm RTA 3ml

Features
SS316
Capacity: 3.0ml
Airflow adjustable
AFC: 0.9mm~1.1mm


https://www.2fdeal.com/search/?Keyword=mk2&CateId=MK2 Special Style 18650 Mechanical Mod Albert Limited Edition

Features
510 threading connection
Brass construction
Powered by 1 x 18650 battery (not included)


https://www.2fdeal.com/search/?Keyword=Lanyard+&CateId=Necklace Lanyard with Connector for E-Cigarette / Pod Vape Kit / Vape Mod Kit

Hey guys. Today let's look at a disposable vape which is very popular in the market now – the Swft 3K. It can provide about 3000 puffs and allows airflow adjustment, do you like these features? Here we go!

Swft 3K is the excellently neo-disposable vape from the Swft. It comes with 3000 Puffs per device and has six distinct delicious flavors. Swft 3K is built up with not only the battery capacity which can reach up to 1200mAh but also the tank capacity large enough to contain the 7.5ml pre-filled salt nicotine e-liquid.

It actively demonstrates that the large battery capacity and the pre-filled e-liquid tank give enough support to the long-lasting battery lifespan and allow you to have a convenient and quickly vaping enjoyment. The nicotine level for the exact purpose of the Swft 3K is achieved to 5% per device. If you are looking for a great Independence Day Vape Sale, definitely don't miss out on it!

Get it here: Swft 3K Disposable 3000 Puffs 1200mAh

You may also like:
drag 3 price
max flow vape

Freemax Onnix 2 15W Pod System Kit utilizes the FM SaltCoilTech 3.0, equipped with the Dual Vertical Coil technology and Freemax Patented Tea Fiber Cotton Formula for strong throat hit and intense nicotine satisfaction. What’s more, OX DVC Coil 0.8ohm & 1.0ohm & 1.2ohm (Sold Separately) for Onnix series products (Onnix 20W Kit, Onnix 2 15W Kit and more Onnix Kits on the way) are able to match 100% flavor categories for both Nic Salt and Freebase E-liquids with various VG: PG ratios. In another word, Onnix 2 Kit is able to support all sorts of e-liquid categories with various VG/PG ratios in the market, both nic salt, and freebase.



OX DVC Coil Series Specifications
Freemax OX DVC Coil 0.8ohm (Included in the kit)
Dual Vertical Coil and Tea Fiber Cotton Formula
Output Power: 12W-15W
For High Strength MTL Vaping Needs (20-35mg Nic Salt/3-9mg Freebase Best)

Freemax OX DVC Coil 1.0ohm (Included in the kit)
Dual Vertical Coil and Tea Fiber Cotton Formula
Output Power: 9W-13W
For High Strength MTL Vaping Needs (30-50mg Nic Salt/6-12mg Freebase Best)

Freemax OX DVC Coil 1.2ohm (Sold Separately)
Dual Vertical Coil and Tea Fiber Cotton Formula
Output Power: 9W-13W
For High Strength MTL Vaping Needs (30-50mg Nic Salt/6-12mg Freebase Best)

$27.99 VOOPOO VINCI 2 Kit





$29.99 VOOPOO VINCI X 2 Kit





$10.99 VOOPOO Vmate Pod Kit

Voopoo Drag X Plus Professional Edition Kit continues the classic design of leather and metal and provides max to 100W output by GENE.FAN 2.0 chip.DRAG X Plus Professional supports a single 21700 or 18650 external battery and is strong with Type-C 5V/2A fast charging port to accompany you from morning to night.
With max 100W power output, DRAG X Plus Professional enables you to make bigger flavorful clouds. Adjustable power range 5-100W is to satisfy your needs.The new TPP pod tank with 510 thread and 21700/18650 dual compatible batteries allow you to explore more possibilities. At the same time, the large capacity of 5.5ML also provides more possibilities for players.
Magnetic design with 510 connector, giving players more space to match any favorite device more professional equipment, more explosive power.



Specification:
Size:28 x 34.5 x 139mm
Material:Zinc, Leather, PCTG
Battery:single 18650/ 21700 battery(Not Included)
Output:5-100W
Output:Max 8.5V
Output modes:VW, Smart, RBA
Screen:0.96 inch TFT display
Resistance range:0.1-3.0Ω
Thread:510



What's in it?
1 x Voopoo Drag X Plus Professional Edition Mod
1 x Voopoo TPP 2.0 Pod Tank
1 x Voopoo TPP-DM2 Coil Head 0.15Ω
1 x Voopoo TPP-DM2 Coil Head 0.2Ω
1 x USB Type-C Cable
1 x User Manual

Disposable pod is increasingly popular is lots of countries and regions, like Russia, US, UK, Middle East, Australia, New Zealand and so on. It's definitely a maturing new trend of vaping market.

So today, let's take a look at Vozol Bar seirs, our highly recommend disposable vape kits!

Until now, we have 6 kinds of pods in Vozol Bar series with different appearance, puffs and flavors to meet your different needs.



Vozol Bar - 670mAh built-in battery, about 1000 puffs' vaping with 4ml capacity.

Vozol Bar 1600 - 850mAh built-in battery, about 1600 puffs' vaping with 5ml capacity.

Vozol Bar 2200 - 1100mAh built-in battery, about 2200 puffs' vaping with 6.5ml capacity.

Vozol Bar 800 - 550mAh built-in battery, about 800 puffs' vaping with 3.5ml capacity.

Vozol Bar 500 - 400mAh built-in battery,about 500 puffs' vaping with 2ml capacity.

Vozol Bar S - 450mAh built-in battery, about 500 puffs' vaping with 2ml capacity and most affordable price.



Vozol Bar, Bar 800, Bar 500 and Bar S are OEM available, you can customize the color/flavor/package/logo/puff and so on based on your personal needs! Feel free to contact us via: business@elegomall.com

Elego provides the most competitive wholesale price for Vozol disposable kits, login to check more latest vape kit with better price!

For any questions about Vozol wholesale or any vape wholesale in China, feel free to contact us.

Wotofo MDura Mini Mod is an 80W box mod powered by single 18650 battery. There is a Up/Down button on the bottom for you to adjustable output wattage between 5-80W. Utilizing nexCHIP, MDura Mini Mod features 0.001s firing speed. A 0.96 inch TFT screen will show you vaping information and help you use this mod easily.

Features:
High-calss leather wrap
Single 18650 battery
0.96 inch TFT screen
Supports 0.001s firing speed with nexCHIP
Adjustable output wattage between 5-80W
Type-C 2A fast charging


Wotofo MDura Mini 80W Box Kit is a compact side-by-side device with light-weight and high-class leather wrap. Wotofo MDura Mini 80W Kit consists of Wotofo MDura Mini 80W Mod and nexMINI Subtank. Wotofo nexMINI Subtank is a leakproof tank with child lock. Wotofo nexMINI comes with Rugged 3.5ml PCTG tube and 4.5ml glass tube with top filling design. nexMINI Sub Ohm Tank includes two coils: #D43 Clapton Mesh Coil for rich and strong flavor and #D41 A1 nexMESH Coil for smoother hit. Wotofo nexMINI tank also supports adjustable bottom airflow.

More details for MDura Mini
MDura Mini Mod >> https://www.3fvape.com/50625-wotofo-mdura-mini.html
MDura Mini Mod Kit >> https://www.3fvape.com/50621-wotofo-mdura-mini-mod-kit.html

Squid Industries Double Barrel V4 Box Mod, the latest Double Barrel series from Squid Industries Vape, is powered by double 18650 batteries with adjustable wattage of 5-200W output. Double Barrel V4 mod by Squid Industries features 0.96-inch colorful screen. And there are 6 customized colors theme, you can choose your favorite. Double Barrel V4 Mod can match up to 25mm tanks, no overhang.

Paremeters:
Battery: dual high-amp 18650 batteries(not included)
Output: 5-200W
Output Voltage: 6.4-8.4V
Resistance Range: 0.1-3.0ohm
Screen: 0.96 inch colorful display
Thread: 510

Features:
Powered by dual 18650 battery, max 200W output
0.96 inch colorful screen, 6 colors theme for options
Multi-function firing button (doubles as wattage control)
Compatible with up to 25mm tanks, no overhang
Overtime vaping protection
High temp protection
Short-circuit protection
Low battery protection

More details for this Dual 18650 Mod, please check >> https://www.3fvape.com/50655-squid-industries-double-barrel-v4.html

Aspire Cloudflask S Kit

Cloudflask S Kit comes with incredible value, massive cloud actions and is ready for HUGE performance. It is ergonomic and ruggedly durable with premium grade aluminum material. Cloudflask S not only adopts a 0.25ohm Cloudflask mesh coil for DTL vaping, but also supports an all-new 0.6ohm mesh coil for restricted DTL. You can enjoy amazing vaping experience when the unique double-side air inlets work with Bypass output. The Malaysia Version contains a leather case, and the Standard Version is not contains leather case. Cloudflask Pod is a bottom-filling pod of 5.5ml. Cloudflask S is built with 2000mAh battery and 2A type-c quick charging port.


Detalles:

1. Compact structure, outstanding functions
2. Adopts Cloudflask mesh coil to provide DTL or RDTL vping
3. The unique double-side air inlets
4. Easy bottom refilling
5. 2000mAh battery capacity for all-day vaping
6. 2A type-c quick charging
7. 3 color battery level indicator
8. Two sleek options: with leather case(Malaysia Version) or without leather case(Standard Version)
9. Safety protections: Overcharge/Short Circuit/Low Voltage/Vaping Over-time/Overheat/Over Voltage Protection





Vapefly Brunhilde SBS 100W Mod

Brunhilde SBS 100W Mod is a powerful mod of 5-100W output wattage and VW/Bypass/TC output mode. It supports single 18650/20700/21700 battery, features type-c 5V 2A fast charging. Vapefly Brunhilde SBS 100W Box Mod provides 6 protections with 3S Chip: Short Circuit/Reversed Battery Connection/Low Voltage/High Temperature/Over Charge/10s Cut off Protection. The Rhinestones only for DIY fun, and are included in the package of pink & rose gold & red colors.

Detalles:

1. Vapefly & German Community project
2. 1800 seconds for carving a single wing
3. Aerospace aluminum casing, light in weight, perfect in hand
4. VW/Bypass/TC output mode, 2A type-c fast charging
5. Supports single 18650/20700/21700 battery
6. 3S chip brings safety protections: Short Circuit/Reversed Battery Connection/Low Voltage/High Temperature/Over Charge/10s Cut off Protection

Today,I wanna introduce you the Hotcig Kubi Plus Pod System Kit uk. Hotcig Kubi Plus Pod Kit is the latest version of the reusable Pod Kit with adjustable MTL and RDL airflow.

The Hotcig Kubi Plus pod system kit uk inherited the exquisite appearance and optimized taste experience of the Kubi series. Powered by 850mAh built-in battery, the Hotcig Kubi Plus Pod Kit can be fully charged quickly by the Type-C cable.

And the Hotcig Kubi Plus Pod comes with 4ml juice capacity and 1.2ohm mesh coil inside. Moreover, the Kubi Plus Pod is a refillable visible pod which is easy to refill flavor chased long lasting. What is more, the Hotcig Kubi Plus device gives you accurate airflow adjustment, from MTL (mouth to lung) to RDL (restricted direct to lung) vaping style. Please take the Hotcig Kubi Plus device to home from best online vape store uk now!

SPECIFICATION
Size:19 x 19 x 107mm
Battery capacity:850mAh
Pod capacity:4ml
Cartridge material: Food Grade PCTG
Voltage:Constant voltage 3.6V

Quick Link:Hotcig Kubi Plus Pod System Kit 850mAh

Freemax Onnix 2 15W Pod System Kit 900mAh


Efun.top New Arrival
Sale Products In Stock

Wotofo MDura 200W Mod Kit


Efun.top New Arrival
Sale Products In Stock

Sourcemore sent me this Wotofo Troll X for the purpose of this review.

The Troll X is a dual or single coil, top fill, bottom air RTA. In the box, you’ll find the RTA, a bubble glass, a honeycomb airflow insert (slim groove airflow insert is installed), a bag of O rings and tools, a coil trimming tool, cotton laces, and a pair of framed staple clapton coils.





It’s 24mm wide, 36mm high (without the drip tip), and it holds 3ml of liquid with the straight glass, 4.4ml with the bubble glass. It comes in black, SS, blue metal, blue, gold, and rainbow – I got the rainbow.



It does not come with a spare drip tip, but I’d like to point out the very nice drip tip it comes with. It’s a little thing, but a nice touch.




I built it with the included coils and cotton, but first I popped out the grooved AF and put in the honeycomb. They’re really tiny and seem fragile, but they do slide in and out quite easily, and the honeycomb gives a nice smooth air flow.


(please excuse my beater Eleaf)


The machining and finish look flawless to me. The threading is crisp, and that delicate knurling doesn’t just look beautiful, it works beautifully, too. The top and bottom are super easy to grip, so it’s easy to take the tank apart or adjust the air.





Air flow is fairly open – I’ve had RTAs with more air flow, this is a tad less open but it’s still sufficient. It has five air holes on two sides, and closed down to one it’s restricted enough for most, I would think, while still being very smooth and not getting too hot. The coils sit cradled in a curved deck, with your choice of inserts right in the center, so there’s zero guesswork about how to get those coils in the air flow properly. And there’s plenty of room to poke that cotton through the deck. This is designed to not need a lot of know-how or trial and error to get a good vape.





The top fill is a slide to open deal, and there is a tiny dot where you push to open, but it’s hard to see, easy to miss if you're not aware it’s there. The top is very firm, I have zero worry that it’ll open accidentally. And there’s also a substantial membrane with a slit in the fill port. I’ve held it upside down with the slide open and no leaks at all. Well done.



Cons... I don’t have much negative to say about this. The screws are a bit on the wee side, but they didn’t give me any grief. I would have liked a little more juice capacity. It’s a somewhat thirsty tank, especially in dual coil mode. And it’s easy to fill, once you find that microscopic arrow. It is bottom air, so if you don’t get enough cotton to the deck, it could leak. But they do give you plenty of room to get that cotton in.



Pros...If I had to give it a number, I’d say the flavor is a solid 8, and I might nudge that to a 9 with a different build if I play with it a bit. It’s really well made, and comes apart, goes together very nicely, even right out of the box. The airflow adjusts from quite restricted to plenty open – I’d say about 8.5 out of 10. The slide cap – and that’s a feature I’m always leery of – is really well done, very firm, no worries about carrying it in a pocket or purse. It also comes in a nice range of colors, and the price is right.



All in all, this is a really nice RTA and will stay in rotation.

Thanks, Sourcemore, for the opportunity to review the Wotofo Troll X!

ETA: use code TROX and get the Troll for $24.19.

Hello there fellow vapers.

Time for another review,this time i am going to review the Lost Vape Grus 100W Kit which i was sent by Sourcemore.

Time to see what comes in the box,the package of Lost Vape Grus Kit Comes With:

1* Grus 100W Mod
1* UB Pro Pod Tank (5ml, 810 Drip Tip)
1* 0.15ohm UB Pro P1 Coil
1* 0.3ohm UB Pro P3 Coil
1* Type-C USB Cable
1* 18650 Battery Adapter
4* O-Rings
1* Warranty Card
1* User Manual

Here it is all laid out for you:



Since i owned the previous version i thought i would post a side by side so you see that aesthetically speaking they both look the same:


(The one i am reviewing is the one on the left)

Ok time to put up some images with all the basic information on said kit.

General break down of the exterior and all the components of the kit (Mod+Pod Tank)



This second version of the Grus Mod comes with the Upgraded Quest 2.0 Chip



Multiple options when it comes to batteries that you use with the Grus Mod

This pod is refilled on the side and not on the base like some other pod systems:



Information on which coils you can use with the UB Pod Tank/UB Pro Pod Tank:

FIRST IMPRESSIONS:

I have used the previous version of the Grus for quite some time and it is a mod i really like.
This updated version looks exactly the same on the outside and coincidence would have it i got the same color scheme as the Grus that i already owned.

This mod just feels and looks good,you do get a slight ''high end'' sensation when you are holding it in your hand.

It is well made and sturdy (zinc alloy body),a bit on the heavier side (with the 21700 battery) but some of us like that.

The whole is revamped and it comes with a lot of features that the previous version didn't have,features like 5 vape modes, 3 boost levels, and 3 user records.

Personally i am a simple type of vaper so unfortunately i haven't given any of features i try when using the Grus for the review.
I just put the battery in,adjust the wattage and start vaping but if you like using Bypass, Voltage or choosing the material of the coil you can do so with this mod.

Time to share my thoughts on the UB PRO Pod Tank...

This is one of the times i am torn between performance and looks.

Performance wise i liked this pod,easy to put the coil in,easy to refill and no leaking.
I am a low wattage DL vaper so i have only tried the 0.3ohm UB Pro P3 Coil and even that is to hot for me but i gotta say i was impressed with the flavor.

Shame i couldn't give the other lower wattage coils a try,those i would have enjoyed more but that is just the way i vape,50 or 60 watts is just to hot for me.

I did try a quick chain vape 2 minute marathon and no dry hits and after almost a week of heavy use the coil is still as good as new.

Aesthetically wise i just don't like it,performance is really good but the way it looks on the Grus mod just isn't right.

Grus mod itself is one beautiful mod,stylish with some sexy subtle curves,to me it looks like a high end mod.

The material of the UB PRO Pod Tank just doesn't match the way the mod looks and that in my case really bugs me.

As i mentioned before the performance is top notch,easy fill system,airflow ring is easy to work with,no dry hits or e-liquid in the mouth but i just don't like the way it looks on the Grus mod.

Performance wise i give the UB PRO Pod Tank a 9,aesthetic score? barely a 5.

PROS

-Mod looks fabulous and it feels high end
-Battery door is of the threaded type
-Nice clear display that is easy to navigate
-Ability to put in a big hunky atomizer,this mod will house a 30mm atomizer with no overhang

CONS

-Looks of the pod do not match the high end looks of the Grus Mod.
-As with the previous version of the Grus we still do not have a voltage indicator on the screen.

FINAL THOUGHTS

I love the Grus Mod,the pod even thou it performs well just bugs me.
Seems out of place when put on top of the Grus but this is just a personal issue,some might not mind the looks of the UB PRO Pod Tank.


Thanks to @Ema and Sourcemore for sending me the Grus Kit for the purposes of this review.

Link to the product in question:

Lost Vape Grus 100W Kit Vape Mod Kit with UB Pro Pod Tank

$33.99 - Lost Vape Grus 100W Kit
Code:LVGK

OXVA Xlim Pod System Kit 900mah Designed to deliver X-treme flavor, the XLIM is a mini pod equipped with 900mAh battery. It has a mini screen to display necessary information, and an airflow ring on the side to find your best draw precisely.

OXVA Xlim Pod System Kit, made of Aluminum alloy & PCTG, is the most all-around pod for X-treme flavor and strong throat hit. OXVA Xlim Pod Kit works with 900mah battery and reaches up to 25W output. OXVA Xlim adopts 0.42 inch OLED Mini Screen and Auto-draw & Manual ignition. Xlim Pod System supports side airflow control design. OXVA Xlim has 2ml anti-leaking pod with top filling design.

Quick Links:
OXVA Xlim Pod

Parameters:
Size: 14* 24* 111mm
Material: Aluminum alloy & PCTG
Battery: built-in 900mah battery
Power: 5W-25W
Screen: 0.42 inch TFT display
Charging: Type-C, DC 5V/1A
Capacity: 2ml
Resistance: 0.8Ω KA1 mesh coil(12-16W)
1.2Ω KA1 mesh coil(12-16W)

Features:
X-treme Flavor and Strong Throat Hit
Side Airflow Control Design
Upgraded Anti-leaking Design
Two Different Flavor Style of Cartridges (0.82 & 1.292)
Internal 900mAh Battery
0.42 OLED Mini Screen
Max 25W Output Power
Auto-draw & Manual
Bacteriostatic Mouthpiece

Packages:
1* Xlim device
1* 0.8Ω Xlim cartridge(pre-installed)
1* 1.2Ω Xlim cartridge
1* Type-C Cable
1* User Manual

Miso Pro is coming! Any pod lovers? lol

Dear Valued Customers,

Here comes a good news – Credit Card Payment is Available Now!!!

So we’ve prepared a Summer Sale, with 4 vape deals in total to celebrate this big event. Take the chance to save and pay your order in a more convenient way.

A. Sign in to Get 30% OFF

• Old customers – Please sign in directly to get your member VIP price, which is about 30% cheaper than regular price (the price before login).
• New customers – Please create a new account to get the same member VIP price.

Note: For all E-liquid products & DOVPO products, the member VIP price is the same with regular price, but we are offering better discounts, let’s chck them out.

B. 15% OFF Sitewide
Extra 15% OFF coupon code is available for your whole order! Come and join us~

Details below:

• Coupon: SUMMER
• Date: 5th – 15th July, 2021(-0600 GMT)
• $1 Flash Sale products excluded

C. Giveaway – Free New Vapes
We are now givingaway Vaporesso brand new Luxe 80S Pod Kit with 5 winners in total, Ends on 7th July. If you don’t want to buy right now, why not try your luck and win free vapes? Click here to join and win!

D. Vape Deal Links
Here are some other useful links where you can find our best deals:

• Weekly Sale – Best price for new hot vapes with 17% OFF Coupon: WSHC
• $1 Flash Sale – Ultimate cheap vapes
• Clearance – Extremely cheap vapes!

Please view the Hot Summer Sale 2021 here.

The coolfire z50 kit is the vape device that helped me quit smoking and start vaping one year and one month ago...it was a good choice cause I had no problems on my first vaping steps making the transition pleasant...

The z80 kit seems an impoved version in every way from the great z50 kit in my opinion...

Removable battery is always good to have....bigger size make it better to hold in the hand...very lightweight but also feels sturdy....great machining always from innokin and buttery smooth threads on the battery cap...

I still don't know if the Fourier vape tech with the new board can improve the coil life or the refresh makes any difference but I always like to see innovation and the mod performs very good that's for sur....the z coils already for me are great coils and very long lasting anyways ..

I also saw the 0.8ohm coil has bigger juice holes now!!!! I don't know since when this happend cause i have a stock of older coils and I also rebuild them...

I always thought the juice holes were kinda small for the 0.8ohm coil and sometimes on colder temps it couldn't keep up to wick 70vg juices in my opinion if u chain vape
I am very happy innokin doesn't settle and still making improvements and fine-tune their coils even tho they are so successful...

The zenith 2 is an improved zlide tank in my opinion maybe they chose to name it zenith caus the old zenith is a legend hahahaha
In fact is so similar u can swap the bottom airflows from the zenith 2 to the zlide if u wanted

its same dimensions as the zlide if u don't count the curves on the airflow ring and topcap,those curves btw make it look soooooo good

....it has wider chimney inner diameter that helps for direct lung vaping and it's not much bigger to affect the mouth to lung flavour in my opinion.....

it also comes with larger juice capacity cause the twist topfill mechanism that borrowed from the zenith takes less space and makes the tank be able to hold more juice than the zlide on same dimentions oh yeahhh....

the new airflow system is perfect....with small holes to be able to fine tune mouth to lung from tight to airy and a big slot to wide open and vape direct lung...

In my opinion is not just restricted cause it can be almost as airy as for example the hellvape destiny rta that is single coil direct lung rta.... The zenity 2 can supply the 0.3ohm z coil with all the air it needs and Vapes great...something that the zlide couldn't keep up...

Buying Best Cheap Vape Pens Online | Vape Hammer

Cheapest Best Vape Juice Online Store | Vape Hammer

Hi, any tips for getting the best out of the Daedalus Pro? I bought it a while ago, but haven't really used it yet. I really just want it for simple fused claptons, dual or triple core.

Also, if I want 30 cores can I just use the 28g wire guide?

Thanks for any answers.

If you are looking for some convininet small pod kit that easy to carry, then it's time to check the new released OXVA Xlim Kit.

XLim kit from OXVA has all range of functions that a small pod system needs, and it got more! Not just easy to use but still poweful and good to use!



Main Features:
1. Top filling cartridge to prevent leakage, with visible window to observe retain e-liquid
2. Built-in 0.8/1.2ohm coil, suitable for sweetness e-liquid/less sweetness e-liquid
3. 900mAh built-in battery, output power 5-25W, auto-draw/button activated
4. Adjustable airflow valve on the side of mod, with 0.42" OLED mini screen

Size: 24 x 14 x 111mm
Capacity: 2ml
Color: Silver, Gunmetal, Black, Dark Blue, Green, Rose Blue

Learn More: (login first to check better wholesale price)
OXVA Xlim

Elego provides the most competitive wholesale price for all the vape devices, login to check more latest vape kit with better price!

For any questions about OXVA wholesale or any vape wholesale in China, feel free to contact us.

Hey guys. Today let's look at the Wotofo nexMINI Tank. If you know the nexMESH technology by Wotofo, you may wanna try this latest tank. Here we go!

Wotofo nexMINI Tank is a 22mm sub-ohm Tank, with a childproof lock and lock-up base, designed to provide comprehensive use protection based on an excellent vaping experience. It is made of Pyrex glass and stainless steel and has a capacity of 3.5ml, allows for convenient use, easy top refills, and a design that eliminates the risk of leaking the vape juice while refilling the tank.

The nexMINI Tank with an adjustable bottom airflow that allows for a customizable vape, with either a breezy inhale or a more restricted one whatever your preference. Featuring the new Wotofo D series mesh coil system this tank will push out some crazy flavor and huge clouds with little effort. Comes with a drip tip which is a supported replacement, you can easily customize it according to your preferences!

Check for more details here: Wotofo nexMINI Sub Ohm Tank 3.5ml

You may also like:
geekvape obelisk 200 mod price
wotofo srpnt rda review