gauge

Pure Nickle Round Resistance Wire. New 100 ft spools. 1 26 AWG 1 30 AWG 1 32 AWG $20.00 for all 3, plus $5 shipping. Includes 1 Beadalon band (google it) to keep the spool from unraveling.

Each bag contains 6 bundles of 1000 each (yup, 6000 total per bag) 1 bag of 1.8 OHM 1 bag of 2.2 OHM Each bag is $20.00, plus $5. shipping Buy both, for the same $5. I also have the machine ! to make your own if interested .. it's new.

Three boxes of pre-made Stainless Steel 316L wires. Each box contains 100 wires. $10.00 a box. Should last you a long time :p 1 box is 26GA/0.6 1 box is 28GA/1.3 ! box is 30GA/1.5 Shipping is $5.00 total, no matter how many boxes you buy.

I have a SqEvo, that I'm looking to repair, and I'm wondering if the wire used in it's original construction is appropriate. It appears to be 18 gauge solid core enameled wire. The mod in question has 10.8 hours on it according to EScribe and I suspect friction of the battery positive wire...

So I want to buy a squonk mod plus rda. It doesn't allow you to change wattage, so I need to know what wire gauge I need for this specific ohm, the ohm is 0.26 so what wire gauge would I need ?

Hello Is it possible a wire it's too thin for the cotton? I use 28ga wire for 3mm coil on my mtl atty...is that bad idea? And btw can it be bad I use 3mm since it's supposed to be used with 2.5mm??? In my understanding, since the coil can fit with no shorts and can wick the atty ok with the...

I have a dna75 single 18650 that I take out with me. I just ordered a bunch of small'ish MTL clones to use with it (Spica, Prime, V5, Millie, Gate). I also have a DNA250C triple 18650 that I use at home. I never used TC and don't really want to learn it nor power curves but might have to learn...

I’m getting ready to place an order of wire and wicking and I thought I’d give ribbon or flat kanthal a try. I’ve never tried flat or ribbon wire so maybe someone could suggest sizes used for long slow dL vaping and mtl. The choices are all 0.1mm thick with choices of 0.3,0.4,0.5 and 0.8mm...

i have a cloud beast TFV8 (NOT a king, NOT a baby, NOT a junior) I bought the RBA-12 (or maybe it was RBA-16) deck because the default rba deck ALWAYS leaked This one never has I’ve had the same Clapton’s in there for 5 years (fused alien Clapton I think?) Normally I just wait until the wick is...

Hello everyone, i have been trying to build my own Fused Clapton coils on my dual post Geekvape Creed 25mm Rta but my i can't do the math to order the right diameter of wire spool for my builds. Here's what i ordered; Geekvape Fused Clapton Kanthal Wire 24GA/32GA and, Steam Coil 4-Core SS 316L...

I usually buy 26g/30g clapton coils with a 2.5mm ID, but when re-ordering from AVS I accidentally put 28g/36g and have no idea if I need to do something differently with them, mainly because these are tiny. I'm using them in the recurve RDA, should I wick them differently? And am I going to need...

Hello, does anyone on here know of a 510 connector that has a beefy 510 pin that would accept 8g stranded? I am building a triple fetted 2s2p series box and I plan on using 8g solid and stranded wire in it. There is the v2 varitube that would allow me to solder 8g to it's tab but the pin itself...

Hello,i have researched this but can't really find an answer. I normally use Temco wire but recently wanted to try 29 ga SS316 L that Temco do not make. I got some from a company called Pure Atomist. Using steam Engine my build should come out to 0.62 ohms. That is 6 wraps of 29 ga 2 mm id coil...

I am considering a stainless tank for their looks and durability. I have a phobia because I have never been able to not break anything made from glass, including pyrex. I tend to be kind of rough with my gear, and always prefer the most durable option. I'll probably drop it onto the tile...

So that other day I had someone tell me that if you were to take a .5 ohm, 1ohm, and 2ohm coil made with the same type of wire and at the same gauge they would all vape the same at 20 Watts. Now that got me thinking about why all these tanks coming out are using sub-ohm coils that require a ton...

What do you guys think about building 20 gauge dual coils to be used on an iTaste VF? I'm thinking about bying this gauge of kanthal and try it. I watched a video on youtube and it seemed pretty easy. I'm just wondering if they are too hard to wrap. Does anyone have experienced it before? Any...

Looking for 30 gauge but got a bit confused when I saw this: Kanthal A1 Heat Resistance Wire - 0.3mm Diameter (300 Micron or 28 AWG) - 50 Metre Spool Am I right in assuming that this is the wire I'm after, the 28 AWG has thrown me somewhat. I'm aware that AWG stands for American Wire Gauge so...

I want to build a dual-coil to use on my VV/VW, so I need to keep the ohms up. Which gauge would likely be best?

Excuse me for my ignorance about wiring. I was lucky enough to find 50 feet of 28 gauge kanthal for about five bucks through Amazon but now that I have it I see that he wire is much thicker than the 32 gauge wire I was using before. I guess I assumed the lower the gauge the thinner it would be...

So I bought 30 ga with my grand. Working out ok. 7 wraps gives me around 1.8ohm but at 8W (3.8V measured at posts) just seems a little too cool. Ive got some 28ga comin so im hoping that makes a big difference. I did have a moment of nirvana this weekend when I adjusted to coil and rewicked, but...