Search results

  1. Krythis

    3D Printed Claw ePipe

    This is my first attempt at a printed ePipe. I like the look and feel of the claw pipe, but also wanted something challenging to work with in the 3D design programs. The hand, cap, and 18350 battery box (fits in bowl) are all printed with ABS plastic and smoothed with several acetone vapor...
  2. Krythis

    3D Printed ProVari Case/mod

    I bought a 3D printer back in April and finally getting some free time to make some ecig stuff with it. I made an ecig desk caddy and battery holder a couple months ago, but that was about it. Here is a ProVari case(?) I designed and made today. I need to tweak the measurements a little, but...
  3. Krythis

    TPA Blueberry Candy

    I've had a bottle of TPA Blueberry Candy laying around for some time and haven't used it because it contains triacetin. Ive seen some threads talking about melted caps and that triacetin is a 'plasticizer'. I don't know enough about it to decide whether or not I wanted to try vapping it so I...
  4. Krythis

    SGv3 - Troubleshooting Wick and Mesh

    I've seen some side conversations in each of the 'Gen' threads, but not one particular thread for the wick and mesh issues. I have a SGv3 and when I bend the mesh the top arch is somewhat oval shaped. This has been giving me a hard time with both shorts and the wire being too far off the wick...
  5. Krythis

    LR Attys

    Does anyone know of any good deals out there for low resistance 510 attomizers? I thought my 10 pack from nhlaer would last a life time until I lost 3 today...Please note these are from a box of ten I bought in MAY. Nothing bad to say about Drew's LR attys, just looking for any deals that may be...
  6. Krythis

    Pomegranate

    When I switched to vapping full time in February I found a DIY flavor I loved and haven't really found anything else I could vape all day without getting sick of it. 2-3% LorAnn Pomegranate, 20-30% VG, and anywhere from 0-24mg nicotine is just perfect in all variations. :thumb: I have tons of...
  7. Krythis

    Wick Material Question

    I purchased this silica rope from MSC(here) as suggested by someone else on ECF who was already working with their own attys. The material on the bottom of this image looks like what I'm looking for, am I supposed to discard the 'fluffier' material above it? It pulls apart rather easily and...
  8. Krythis

    Atty State LED Indicator

    Here's a circuit I've been working on that would light a green LED during normal use and red if the atty lost connection or burnt out. Since it's been about 10 yrs since I took a circuits class I was hoping to get some feedback from those more experienced than myself before I start ordering parts :)
  9. Krythis

    Great Drip Tip For Juice Fed Box

    Here's a clear tip sold by Nhaler.com at Colored 510/901 Drip Tips (#10) on my box mod. Works very well and I'm able to see the drips form & drop from the Teflon tube.:thumb:
  10. Krythis

    Constant On LED - Box Mod

    I'm working on a juice fed box mod for someone who is new to vapping and will definitely forget it on and melt the cartridge at some point. I'd like to wire it so that the LED is on whenever the power in on so that she doesn't forget to turn off the master switch before throwing it in her...
  11. Krythis

    Tube Material

    deleted...
  12. Krythis

    BIG problem with my MP1

    Recently I noticed my Mr Puffer was getting warm and the wire inside looked a bit discolored. I opened the case and hit the button...the spring got red hot. :ohmy: I've had good success with this setup for weeks. I started using high drain 14500s about two weeks ago and added the magnetic...
  13. Krythis

    510 LR Atty - I'm not dead yet

    I've posted about my issues with the NHaler LR attys and a 14500 mod on other threads so I wont get into many of the details..but since I've singled out the issue I figured this would be an appropriate place to post a warning. I found that some of the attys from Nhaler would appear to die after...
  14. Krythis

    510 LR Atty - Juice Fed

    Since Drew doesn't sell a juice fed product I don't think it's inappropriate to post this here. If you feel otherwise please let me know, no disrespect intended. Last week I got my Mr Puffer(top fed 'juice box') in and slapped in a new NHaler LR atty I had ready and waiting. I was getting dry...
  15. Krythis

    Mr Puffer + Nhaler LR

    I got my Mr Puffer in the mail today and slapped in a LR 510 atty from Nhaler...An amazing pair! Had to put a straw in to get more juice through, but after a little tweaking this thing has nice hot vapor, great battery life, and juice fed. :wub::wub:
  16. Krythis

    Atty Adhesive?

    I'm starting to run into a bit of an issue with one of my LR attys. The casing has worked it's way off of the battery connector and the inner tube with the coil is not secured to the outer casing. So basically all the 'inners' are freely moving around. The atty still works great, but it's just...
  17. Krythis

    808 vs 901hv dripping

    I use mostly 808d cartomizers since I was getting annoyed with the 510 cartridge issues. Recently I discovered how much I like nhaler's juices so in a second order I decided to buy a High Voltage 901 atty and a drip tip. I wanted to see why a lot of people seem to favor dripping with a 901, and...
  18. Krythis

    Mod Frustration

    I've built several mini mag mods and absolutely love them when they are working! I had several that had issues with some loosing the negative connection. This was occurring at the circuit board which is under an epoxied cap so there's not much to do to fix it. My first 3 used 510 battery...
  19. Krythis

    Specials?

    Hi Taras, Are your daily specials exclusively for attys and juice or can we expect to see kits pop up now and then? Also, do you allow pick-ups for local customers? Thanks!
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu