Imeo assembled the AFS V2 last Monday & Tuesday and today het took his fully loaded BMW to the post-office and unloaded his trunk with.........................
AFS v2
- Thread starter vapn
- Start date
- th_trl_thread_readers 0
-
- Tags
- baker super t vaporkings
- Status
Lisa asked for more things so I will ship in 2 days from now Emonty
I'm going to have to get one of these AFS's when they come out......Thanks for the update imeo
Anytime Red my friend
Vapn, I had a nice idea for those mouthpieces. Look what I thought:
I didnt liked the rounded mouthpieces because:
1) They were fat so not a good feeling to my mouth. I had to open my mouth a lot. (real cigs are 8mm and e-cigs are 9,2 mm)
2)I couldnt grab the mouthpiece in a convinient way like an cig
3) It was very slick so not a good feeling to my lips. It was like hard metal. (it is anyway)
4) I couldnt thread it tight to GG because it was slipping of my fingers.
I found a solution for all those issues:
A thinner metal mouthpiece (thinner than real cigarettes because the real ones get pushed by our lips so their diameter gets even smaller) that you can grab it easily with mouth, with easy threading and feels like plastic!!!!!!!!
I found this trick because I lost my mouthpiece today. It is somewhere in my car. So I started to smoke without it. My lips grab the top cap of AFS and the feeling was unexpectable! These rhombuses on the cap gave me the best feeling in my lips and I also could grab with my teeths very easy!.
Vapn, try it please and you will agree with me to make a mouthpiece with an external surface like the external surface of the AFS cap
Vapn, I had a nice idea for those mouthpieces. Look what I thought:
I didnt liked the rounded mouthpieces because:
1) They were fat so not a good feeling to my mouth. I had to open my mouth a lot. (real cigs are 8mm and e-cigs are 9,2 mm)
2)I couldnt grab the mouthpiece in a convinient way like an cig
3) It was very slick so not a good feeling to my lips. It was like hard metal. (it is anyway
)4) I couldnt thread it tight to GG because it was slipping of my fingers.
I found a solution for all those issues:
A thinner metal mouthpiece (thinner than real cigarettes because the real ones get pushed by our lips so their diameter gets even smaller) that you can grab it easily with mouth, with easy threading and feels like plastic!!!!!!!!
I found this trick because I lost my mouthpiece today. It is somewhere in my car. So I started to smoke without it. My lips grab the top cap of AFS and the feeling was unexpectable! These rhombuses on the cap gave me the best feeling in my lips and I also could grab with my teeths very easy!.
Vapn, try it please and you will agree with me to make a mouthpiece with an external surface like the external surface of the AFS cap
Well what do you know it does feel pretty good on the lips. Who would have thought? I agree this is a good idea as usual. I think there are still going to be people wanting plastic ones too so better make them also. Maybe a smaller diameter about the diameter as the M401. That is a very comfortable size if they need to be round. I actually prefer round mouthpieces but again some like the flat ones better. They say that round ones make you pucker your lips and give you wrinkles faster than the flat ones that don't make you open your mouth too much.....
As for now though. I am going to try putting an oring between the mouthpiece and the threads on the top cap to keep the mouthpiece in place. That is the ONLY advantage the V1 has over this one, being able to clamp down on the mouthpiece and keeping it in place. I do however like how I can line up the mouthpiece on my GG now without worrying about keeping the holes up or down.
I have had a great day with the AFSV2 today with no problems at ALL. I think I might have it mastered already. That was quick, much quicker than the last one for sure. It seems to me that I was so used to the tiny laser hole always getting clogged up and my draw strength was too much for this one. I can vape very gently; how it should be. If I start tasting the dry taste I just increase my draw a tiny bit and there is juice again. No problems! Thanks again for letting me do these pre tests and getting a head start so I can support people when they hit the hands of the end users.
As for now though. I am going to try putting an oring between the mouthpiece and the threads on the top cap to keep the mouthpiece in place. That is the ONLY advantage the V1 has over this one, being able to clamp down on the mouthpiece and keeping it in place. I do however like how I can line up the mouthpiece on my GG now without worrying about keeping the holes up or down.
I have had a great day with the AFSV2 today with no problems at ALL. I think I might have it mastered already. That was quick, much quicker than the last one for sure. It seems to me that I was so used to the tiny laser hole always getting clogged up and my draw strength was too much for this one. I can vape very gently; how it should be. If I start tasting the dry taste I just increase my draw a tiny bit and there is juice again. No problems! Thanks again for letting me do these pre tests and getting a head start so I can support people when they hit the hands of the end users.
Good Vapn, I was sure that you would liked it!! About the flat mouthpieces I will make them no worries, I just said my reasons that I didnt liked the rounded ones. The flat mouthpieces are on my scedule
Mouth is not rounged its flat, so flat mouthpieces are more convinient to me but thats a matter of taste of course.
I will make the metal and plastic threaded mouthpieces, thats the reason I didnt put an o-ring there to keep mouthpiece in place. All mouthpieces will be threaded on AFS!
As for the AFS. First of all I am very glad that you had a great day with AFS Keith and if you are happy then all people will be buddy!!
Second: Smoking without mouthpiece today I notice something very very interesting. With mouthpiece in place I hade liquid in my mouth even with dripping. I overflood the atty to see what will happen without mouthpiece and liquid couldnt come to my mouth! That was an unexpected result because I was thinking that the opossite would happened. So I will make a very big internal hole on mouthpiece to avoid liquid in mouth. So with new mouthpiece we can vape hard too so we can avoid any dry taste
Mouth is not rounged its flat, so flat mouthpieces are more convinient to me but thats a matter of taste of course.
I will make the metal and plastic threaded mouthpieces, thats the reason I didnt put an o-ring there to keep mouthpiece in place. All mouthpieces will be threaded on AFS!
As for the AFS. First of all I am very glad that you had a great day with AFS Keith and if you are happy then all people will be buddy!!
Second: Smoking without mouthpiece today I notice something very very interesting. With mouthpiece in place I hade liquid in my mouth even with dripping. I overflood the atty to see what will happen without mouthpiece and liquid couldnt come to my mouth! That was an unexpected result because I was thinking that the opossite would happened. So I will make a very big internal hole on mouthpiece to avoid liquid in mouth. So with new mouthpiece we can vape hard too so we can avoid any dry taste
I would love a flat Mouthpiece......I always hated the round ones....The round ones Just don't feel natural to me.....But i love the Flat ones......Great idea Imeo
Thanks a lot Red my friend, I was hating them too but maybe we will change our minds with this new one.
Of course flat ones will be made. I am thinking of a way to make the flat ones with rhombuses too. They will be the best as I see it but its a little dificult to be made like this. But I dont like easy things!! We will see soon buddy
Thanks a lot Red my friend, I was hating them too but maybe we will change our minds with this new one.
Of course flat ones will be made. I am thinking of a way to make the flat ones with rhombuses too. They will be the best as I see it but its a little dificult to be made like this. But I dont like easy things!! We will see soon buddy
Sounds Good Imeo....But rhombuses might be hard to achieve though....But you're the Engineer so I'm sure you'll get it done
Imeo all this sounds great man. no liquid in mouth, flat mouthpieces, geez you are awespme. Cant wait.
That is very interesting imeo. I was also getting juice in my mouth yesterday but none today because I slowed down my draw a bit but closed off the control ring a little to get juice. Once I got my draw adjusted and the control ring adjusted just how I like it every thing started to work perfectly. I only had one time that I got a burnt taste and it was soooo easy to get juice again. Just draw a little harder and that was it. This one is so simple to use!!!! I must say I had a few troubles at first but I think that was only because I was trying to use it like the old style AFS where I had to draw really hard. Now I can't wait for the TS AFS......
Good to hear Vapn. I too am so used to the hard draw with the V1 AFS that it will be nice to have a relaxing smoke again without waking up the whole house with my loud inhales on the AFS.
- Status
Similar threads
- Locked
