mmm,the reason why I bought the AFS V2 is that it would work without fluval, paper towels and whatever else to get the 100% experience. I had V1 and did not like the fact that I had either juice in my mouth or it was dry as a bone.......
AFS v2
- Thread starter vapn
- Start date
- th_trl_thread_readers 0
-
- Tags
- baker super t vaporkings
- Status
Blobe this batch of AFS's that Imeo put out this time is a universal AFS for any mod out there and any of the GG line. Its not just for the GGTS. The next one he makes is going to be specifically for the GGTS. It will replace the atomizer cap or top cap to make it one complete unit.
I hope this helps?
Thanks
Michelle
I don't get liquid in my mouth. Fill the tank with the airflow on all the way. (Screwed down)then put the top on. The switch the airflow off(allowing liquid to Atty) give 1 primer puff and the liquid will start to flow. Then open air flow to desired setting.
Hope this helps.
I don't get liquid in my mouth. Fill the tank with the airflow on all the way. (Screwed down)then put the top on. The switch the airflow off(allowing liquid to Atty) give 1 primer puff and the liquid will start to flow. Then open air flow to desired setting.
Hope this helps.
Ok MonsterKenny good to hear, I read that some people where having issues, I don't have mine yet, hope to get it next Wednesday or Thursday.
I don't get liquid in my mouth. Fill the tank with the airflow on all the way. (Screwed down)then put the top on. The switch the airflow off(allowing liquid to Atty) give 1 primer puff and the liquid will start to flow. Then open air flow to desired setting.
Hope this helps.
First explanation I fully understand
(no offence to the others).Thanks for the tip !
First explanation I fully understand
Thanks for the tip !
Anytime, I tried to make it as clear as I could without making a video.
ok Kenny reason I use the foam in my tip is because I like my darw set a bit tighter than most probably. when you have the airflow set tighter more liquid comes into atty and some can come up this stops it, if you like a real easy draw then you have no problem, I like my attys to run extra wet.
Kind of
does it means we'll be able to buy separatly what makes the difference between afsv2 and afs-ggts ? or will it be a brand new thing ?I don't get liquid in my mouth. Fill the tank with the airflow on all the way. (Screwed down)then put the top on. The switch the airflow off(allowing liquid to Atty) give 1 primer puff and the liquid will start to flow. Then open air flow to desired setting.
Hope this helps.
This should be stickied
Kind of
brand new .
My AFS v2 arrived today, it took about 1 hour to clean out and set up. I fitted it to my shiny GGTS and vaped away.. It is a thing of wonder and beauty. Thank you Imeo for a great device and Lisa for the usual excellent service. Daz
I'm using Tasty Vapor German chocolate cake and I'm having a hard time getting it to auto feed. I'm not sure if it's to thick or not, it doesn't look like it. I have the draw ring almost all the way closed and once in a while I have to close it all the way to prime the atty. I'm not sure why it wont auto feed?
Just to clarify, you said above you have the draw ring all the way closed...did you mean open?
Baker, German chocolate is thick. Try this, close it all the way. No air flow...
Then, puff on it 3 times... you should hear some liquid going into the Atty. After that, you can open up thr airflow, then you should be golden...hope this helps.
Guys, I remind you that the liquid that comes to mouth when you refill the AFS will stop immediately with the new catridge I make!
Thanks rockstar my friend. I hope that you notice that flavor feels much better with AFS
xaxaxa thanks a lot Dah my friend
Blobe, this is the generic AFS. I am making the GGTS AFS that will fit exactly as I want on the GGTS. The will have some differences but it will work exactly in the same way. The differences will be that it will have bigger liquid collector tank, it will be lighter, shorter, it will fit on the GGTS atomizer's cap and it will be a little more beautiful on the GGTS because it will not have the gap I left to make this AFS fit to all mods
Thanks a lot Daz my friend
mbaker, yes do as Kenny said
Thanks rockstar my friend. I hope that you notice that flavor feels much better with AFS
xaxaxa thanks a lot Dah my friend
Blobe, this is the generic AFS. I am making the GGTS AFS that will fit exactly as I want on the GGTS. The will have some differences but it will work exactly in the same way. The differences will be that it will have bigger liquid collector tank, it will be lighter, shorter, it will fit on the GGTS atomizer's cap and it will be a little more beautiful on the GGTS because it will not have the gap I left to make this AFS fit to all mods
Thanks a lot Daz my friend
mbaker, yes do as Kenny said
A suggestion for improvement of AFS v2:
If it is possible, the intake holes (that can be blocked by the control ring) should be at different heights so that you can block a number of holes while leaving some other ones open... That would make the control of liquid flow smoother. Right now i find the control too sensitive...
... even with this minor issue the AFS is pretty amazing.
If it is possible, the intake holes (that can be blocked by the control ring) should be at different heights so that you can block a number of holes while leaving some other ones open... That would make the control of liquid flow smoother. Right now i find the control too sensitive...
... even with this minor issue the AFS is pretty amazing.
- Status
Similar threads
- Locked
