AFS v2

[imeothanasis]

A suggestion for improvement of AFS v2:

If it is possible, the intake holes (that can be blocked by the control ring) should be at different heights so that you can block a number of holes while leaving some other ones open... That would make the control of liquid flow smoother. Right now i find the control too sensitive...

... even with this minor issue the AFS is pretty amazing.

Thanks a lot my friend istrong
Those 8 holes are too many either. I could make the job with only 1 hole but I wanted to be sure that if for some reason the one hole was blocked from liquid or other reason I would had many others to do the breathing job. I had already thought of that but if I had made the holes in different levels then the air would pass with the same easiness even if the 7 of them where blocked. Also the AFS would be much bigger in length without a real reason. But there is a trick that you can do to see if it works nice for you. Move the o-ring down and cover the holes. Then adjust the o-ring at your needs by moving against it the CR

 

[imeothanasis]

Of course you can put a fatter o-ring there at any time so you can cover part of the holes

 

[imeothanasis]

I forgot to say that Vapn gave me a very nice idea with its trick about putting filler inside the AFS tank:

If you notice a leakage from those 8 breathing holes when atomizer is overflooded by reffiling it and closing the cap then you can put a filler around the 4 holes that brass piece has, so liquid will not come out of the 8 holes

 

[ckc]

Someone is asking a GG AFS question in the new members forum,could someone pop over there and answer them?

http://www.e-cigarette-forum.com/forum/new-members-forum/90719-ggts-afs-v2-question.html

Waves to the family

 

[imeothanasis]

Someone is asking a GG AFS question in the new members forum,could someone pop over there and answer them?

http://www.e-cigarette-forum.com/forum/new-members-forum/90719-ggts-afs-v2-question.html

Waves to the family

I have the answers but I cant post there ckc. But thanks for telling me this. I pm to our friend to post here his questions (when he can do that after some nessesary posts).

 

[blobe]

I'm starting to be a bit confused and worried to be honnest about afsV2 (i did order it, waiting for the mail man)
Seems that for everyone the learning curve is kinda step, and that's it's not perfect (well juice dropping on clothes isn't too cool). I don't really want to add foam in my afs to prevent it from dripping.
Did i read anything like that about V1 ?
(I'm maybe paranoid!)

Someone soothe me (soothe means something right?)

 

[imeothanasis]

1) I had told that you will not get liquid on mouth with my new catridge so dont worry blobe because this catridge is on the way to my sellers.
2) If you put filler around the 4 holes that brass part of AFS has, then you will not see AFS leaking at all.
3) The adjustable ring is used only to bring liquid to the atty, so close and take 1-2 hard, short, quick inhales so atty will be filled immediately

This is the pm that I send to my friend that couldnt post on GG forum. If anyone sees drops of liquid around the 8 holes of AFS he can put filler and no leakage at all.
The liquid that comes from there is because liquid collector tank is small at this generic AFS and it gets full soon. I couldnt make it very big like I will do on GGTS AFS. But filler does the job very easy.

Blobe, try it when you receive the AFS and you will see no leakage at all.

Also there is no learning curve at all. You fill the tank and you smoke. When you have the new catridge you will understand.

 

[wood_510]

I'm starting to be a bit confused and worried to be honnest about afsV2 (i did order it, waiting for the mail man)
Seems that for everyone the learning curve is kinda step, and that's it's not perfect (well juice dropping on clothes isn't too cool). I don't really want to add foam in my afs to prevent it from dripping.
Did i read anything like that about V1 ?
(I'm maybe paranoid!)

Someone soothe me (soothe means something right?)

blobe believe me you will be much happier with the v2 over the v1... I've had both and the v2 may have it's quirks but it's easier and way better than the v1. We will walk you through the process and you will enjoy it more than you can imagine.

 

[blobe]

Super T Manufacturing, Innovative manufacturer of electronic cigarette products. just out of the blue, i ordered those prior to the afs/Gg (using a "french" afs, you might or not know about it), this is going to work aswell right ?

 

[wood_510]

Super T Manufacturing, Innovative manufacturer of electronic cigarette products. just out of the blue, i ordered those prior to the afs/Gg (using a "french" afs, you might or not know about it), this is going to work aswell right ?

It will work just fine buddy... tested it out on mine earlier today..

 

[Elendil]

Mine has arrived! Woohoo...........

Now to figure out how to use it...............

 

[narcopathe]

Super T Manufacturing, Innovative manufacturer of electronic cigarette products. just out of the blue, i ordered those prior to the afs/Gg (using a "french" afs, you might or not know about it), this is going to work aswell right ?

Hi blobe ,
I use those t-tips on this poor french copy of the AFS beta you speak about ... and works fine, as with my AFS beta and with my AFS V1 and as it will work on my AFS V2 .

@+
Thierry

 

[Elendil]

My first atty was DOA......down to only 2 already...........8-o

 

[imeothanasis]

Blobe, if you dont want to put filler inside AFS then I will tell you another trick.

1) You lock the Control Ring as Vapn call it, (CR).
2) You fill the AFS
3) You put the AFS cap
4) You unthread my new catridge (or you put out the original catridge). Atty is very overflooded to this point.
5) You empty the liquid from the atty to a bottle or to a towel and as Rob did you put a towel inside atty and turn the AFS looking the floor and you push 3-4 times the button.
6) Unlock the CR and smoke.

No leakage now even if you dont put filler around the 4 holes of the brass connector of the AFS.

 

[imeothanasis]

My first atty was DOA......down to only 2 already...........8-o

Sorry buddy!

Ok, I am waiting for your results

 

[mwa102464]

As in my earlier post those tips from *&^BO*& T work pretty good and stuffing a small piece of blue down them makes it so no fluid hits your mouth at all, I would be willing to bet Imeo's will be much better, Imeo whats with the AFS Atty that we where supposed to get with the new V2 will your suppliers be sending them out to us???

 

[Elendil]

As in my earlier post those tips from *&^BO*& T work pretty good and stuffing a small piece of blue down them makes it so no fluid hits your mouth at all, I would be willing to bet Imeo's will be much better, Imeo whats with the AFS Atty that we where supposed to get with the new V2 will your suppliers be sending them out to us???

Rob is aware of it and will be sending them out when he gets more from imeo shortly

 

[vapn]

Is this what you were talking about imeo? I am giving this a go tonight....

 

[imeothanasis]

Is this what you were talking about imeo? I am giving this a go tonight....

Yes, exactly this buddy, you are a master!!!

The 6 steps I also recomend 3-4 posts before work exellent too.

 

[Wafflestomper]

I got it! It works! Let the atty stomping begin.

The best part is.... I got juice in my mouth!

and thats a good thing!

....never repeat this.