Are you done stocking up?

[markfm]

Another 30ml/day vaper here. Of course, I also vape a hardcore 2mg [emoji3]

I've promoted my lemon cream to a squonk mix. It won't replace my adv, but I like it enough to have mixed up a 240 ml batch, vaping it on the Skullkandy Alchemist mech with a vapefly galaxies mtl rdta topper.

I really enjoy the Alchemist. Given it has what I consider good modmaker silver 510 and silver contacts the price is quite reasonable IMO. All dimensions are within a couple mm of the Pulse X. Made in PA, pleasant staff.

 

[kross8]

She likely got paid from usps insurance.

They weren't insured,, thats up to the buyer,, i didn't buy the insurance.

 

[BigPappa]

I thought you'd bought a bunch from EightVape, and even posted about the deal on here. But...then I thought it might not have been you afterall, when you asked about them above.

I bought a bunch for my Pulse 90W from eightvape as well as some for my luxotics.

I bought the 2 Squeezes from vapesourcing and then added two mods to the order to get the free shipping.... Literally less than 5 minutes after I placed the order, I saw they had the bottles for 10 cents each. I was aggravated that I missed out on the free shipping for them, but I bought a bunch so the overall price averaged out pretty well. How I forgot about that, I will never know. lol

EDIT: What makes it worse is that I still have the bottles on vapesourcing open in a tab to keep track of an outstanding order. lmao

 

[BigPappa]

So many blonde moments Im wondering if they are actually senior moments.

Ummm... I am only a year older than you!! lol

 

[kross8]

Another 30ml/day vaper here. Of course, I also vape a hardcore 2mg [emoji3]

I've promoted my lemon cream to a squonk mix. It won't replace my adv, but I like it enough to have mixed up a 240 ml batch, vaping it on the Skullkandy Alchemist mech with a vapefly galaxies mtl rdta topper.

I really enjoy the Alchemist. Given it has what I consider good modmaker silver 510 and silver contacts the price is quite reasonable IMO. All dimensions are within a couple mm of the Pulse X. Made in PA, pleasant staff.

I have been all over the map lately... Normal is 0-3 mg depending if an encounter with the inlaws happens,, then I bought some juice online from blovapes $10 / 120 ml bottle x2 dif flavors,,,@6mg,,, definitely not a premium vape juice,, but decent,,, too much cinnamon imho,,. I sent 1 bottle off with a young man I am helping out,,, the other bottle is ok'ish.

Lately I have been craving a bit of Smurfs, Drunken turtle or pina colada from Slims ejuice--- knowing i can cut it with vg as they use a lot of flavoring,,, but the mix is good

 

[bnrkwest]

I just took my mod down to 8.5 watts & quite a long draw,, I dunno about cool vape,,,more like room temp like breathing from a straw,, a cigarette is much warmer,,, mod said no way below 7 watts

I think my husband's Zero Pod is warmer,, must be something like 14 watts ???

I stay between 8 and 15 and my usual is 10-12 depending on coil ohms. I prefer .8 ohms. These .3 are killing me LOL they just don't work at low watts and I can't stand hot vapor. I am definitely a tootle puffer.

 

[markfm]

Did you actually try a cerebus or hellbeast coil in it? Because I saw a note on a list that it did not work with the smok but that was the only exception.

Yes.

The other coils won't screw into the Ohmie base, as it's 1/2 mm too narrow. A symmetric problem in the other direction - the Ohmie coils just drop into the Hellbeast and Cerberus bases, won't screw in for a proper fit.

I've got ccell, smok, hellbeast, Cerberus coils all in hand, as well as Cerberus and Hellbeast tanks. I tried the Ohmie parts against the others. I was going "hunh?", especially given the chimney connection was a precise match, any coil fit any chimney. I ended up pulling out my digital calipers to check the base threading ODs, that was the reason for non-compatibility.

 

[kross8]

I stay between 8 and 15 and my usual is 10-12 depending on coil ohms. I prefer .8 ohms. These .3 are killing me LOL they just don't work at low watts and I can't stand hot vapor. I am definitely a tootle puffer.

You're doing whats perfect for you! .18-.50 is my preference,, 1.0+ is definitely not going to work for me

 

[bnrkwest]

Uh,,, wow!,, My mia AHD drip tips jumped into my hands when I went to check the mail today! I contacted Rhonda & she wont let me pay her for them- she is High Class in my opinion!

How wonderful

 

[kross8]

I have never bought a Smok product ever,,, I know the mods have a bad rep,, but I see so many of their attys everywhere,, and noticed they also seem to be the most common coil available,,, been thinking about getting 1 + coils for old age,, I was going to commit to my old KangerTech,, until I started seeing venders list how many/few coils they had ,,so I gave it to someone here. Anyway,,, any Smok tank advice?

 

[fiddleshe]

Ummm... I am only a year older than you!! lol

Junior moments then.

 

[Myrany]

Yes.

The other coils won't screw into the Ohmie base, as it's 1/2 mm too narrow. A symmetric problem in the other direction - the Ohmie coils just drop into the Hellbeast and Cerberus bases, won't screw in for a proper fit.

I've got ccell, smok, hellbeast, Cerberus coils all in hand, as well as Cerberus and Hellbeast tanks. I tried the Ohmie parts against the others. I was going "hunh?", especially given the chimney connection was a precise match, any coil fit any chimney. I ended up pulling out my digital calipers to check the base threading ODs, that was the reason for non-compatibility.

Well that is disappointing I was hoping the tank would be long term useful but it is not Don't think there is a rebuild base for it

 

[fiddleshe]

Well that is disappointing I was hoping the tank would be long term useful but it is not Don't think there is a rebuild base for it

But you got the mod for cheaper than ever!

 

[BigPappa]

I have never bought a Smok product ever,,, I know the mods have a bad rep,, but I see so many of their attys everywhere,, and noticed they also seem to be the most common coil available,,, been thinking about getting 1 + coils for old age,, I was going to commit to my old KangerTech,, until I started seeing venders list how many/few coils they had ,,so I gave it to someone here. Anyway,,, any Smok tank advice?

I have had a bunch of Smok products over the years, I have never had an issue. Much of my stash for the rest of my life is made up of a variety of Smok hardware and coils.

 

[Myrany]

I have had a bunch of Smok products over the years, I have never had an issue. Much of my stash for the rest of my life is made up of a variety of Smok hardware and coils.

I have had Mixed results with smok. MY 2 aliens wont die though the paint is toast on them. I know many people the alien died quick for. My TFV4 and TFV12 tanks are leaky messes. My TFV8 baby beast tanks are wonderful.

It kinda seems either you get a good one or you don't with SMOK.

 

[Myrany]

But you got the mod for cheaper than ever!

Yeah I was just kinda hoping the tank would be useful and I really do not have enough actual tanks in my stash.

 

[markfm]

It sounds like we often vape in the same watts zone.

I'd go for a Hellbeast, Cerberus, or those $10 Vaporesso NRG tanks, then at least try out the Vaporesso gt ccell 0.5 ohm or gt ccell 2 0.3 ohm heads (the latter from vaprzon - good prices and pretty frequent good sales, I've bought a bunch at 40% off).

If you like the Vaporesso heads, great, otherwise you can try out Smok, Cerberus, Hellbeast,... heads.

I've personally confirmed the hellbeast/Cerberus/smok tfv8 baby beast/Vaporesso gt coils fit Cerberus and Hellbeast, and as the Vaporesso NRG is the tank the GT coils were introduced for, the NRG should also accept the other coils.

Vaprzon has started a 12 days of Christmas sale, something different each day, today is just day 2.

 

[markfm]

Well that is disappointing I was hoping the tank would be long term useful but it is not Don't think there is a rebuild base for it

Think of it as a $15 mod and $5 for a "disposable" tank with 7 total heads.

 

[kross8]

I have had a bunch of Smok products over the years, I have never had an issue. Much of my stash for the rest of my life is made up of a variety of Smok hardware and coils.

Any advice?

I want:
Top fill
Top air flow
Ability to use .20-.50 coils ( i see a lot of t???8 or t??12-- but I don't know what all that means- simple kanthalA1 is fine for me,, I'm 28-35 watts .20-.50 ohms is my zone

Large capacity or bubble glass swap would be great

 

[Myrany]

It sounds like we often vape in the same watts zone.

I'd go for a Hellbeast, Cerberus, or those $10 Vaporesso NRG tanks, then at least try out the Vaporesso gt ccell 0.5 ohm or gt ccell 2 0.3 ohm heads (the latter from vaprzon - good prices and pretty frequent good sales, I've bought a bunch at 40% off).

If you like the Vaporesso heads, great, otherwise you can try out Smok, Cerberus, Hellbeast,... heads.

I've personally confirmed the hellbeast/Cerberus/smok tfv8 baby beast/Vaporesso gt coils fit Cerberus and Hellbeast, and as the Vaporesso NRG is the tank the GT coils were introduced for, the NRG should also accept the other coils.

Vaprzon has started a 12 days of Christmas sale, something different each day, today is just day 2.

ok ty I appreciate the advice

Does anyone remember what site we got the hellbeast RBA from for the life of me I cant find my extra ones