I used a SS coil and put it in vertical in place of the mesh. That mesh was 1.5 I think, way too low for me, I saved it incase someone else wants to build that low
View attachment 861437 View attachment 861435 View attachment 861433 I did a rebuild in the Jackaroo coil with a vertical coil, works well
So are the trident coils the same that come in the kit? I have one jackaroo in the stash but I haven't researched the replacement parts yet.
Yes same coils the Jackaroo tank uses. I got my tanks with the Jackaroo kit.
So save your coils, you can rebuild them
Imagine if deeming really didn't happen and we're still vaping all this 2019 gear in 2040. We'd be quite the sight to see even if we can't see why now.
2019 gear in 2040? Meh. I vape 2010-2012 gear in 2019.
This is a Smok zMax before they called it a zMax. 15W max. Telescopic. Usually use it with an 18350. Rockin' a Hotcig Taifun GT II-S...
Got the rattle snake and everything
T'wouldn't botha me a bit. I'm set in my ways. I like what I like. Most of the stuff I bought this past month or so is 2012-2018 gear anyway.
Shall I post some cigalike porn?
Last edited:
Hoping my Provari's still work LOL I'll just be classic vintage
Actually hoping I still work in 2040 Ha ha!
I'm pretty much vaping the same RTAs I was vaping in 2015-2016. I bought a few newer ones to have something different for fun. But after trying all of them out, I still like my old tanks a lot better. Better flavor. Easier to coil and wick. And less parts to keep track of.
Several of the new tanks have top air flow and I've decided that to me, it's not an improvement. It seems like because of the added distance in the route of the air flow, there is a very distinct delay in actually getting the vapor in my mouth after I take a hit. Same thing with RDTAs with the really long wicks. I find them really annoying. I don't think that's an improvement on bottom air flow. Some people say it cuts down on leaks. But bottom air flow tanks don't leak if you know how to wick them properly. Just my humble opinion.
Several of the new tanks have top air flow and I've decided that to me, it's not an improvement. It seems like because of the added distance in the route of the air flow, there is a very distinct delay in actually getting the vapor in my mouth after I take a hit. Same thing with RDTAs with the really long wicks. I find them really annoying. I don't think that's an improvement on bottom air flow. Some people say it cuts down on leaks. But bottom air flow tanks don't leak if you know how to wick them properly. Just my humble opinion.
Can someone help me assume myself what action they are asking me to take? I dont have any current purchased in waiting orders but I do remember seeing something called hold my order or something on purchased but not shipped yet orders. Is my memory correct and is that what they are asking me to do once I do make my purchase? Also they responded not even 6 hours later to my request for warranty on a $4 item. I honestly just thought maybe they could tell me where to buy a new tank section but hey a free replacement is cool too
Below is what they sent that I need help with
FT: Thank you for contacting us, we are sorry for this issue,We will work on to improve the quality control process.
We can send a replacement part to you. Would you like us to add the replacement part in your next order?
By adding it to new order, you simply need to post your new order number here and we will add it manually. In order to catch up, please consider put the new order on hold first. We will release it from hold after the processing.
If you have any questions, please feel free to let us know.
Thank you for your understanding.
Below is what they sent that I need help with
FT: Thank you for contacting us, we are sorry for this issue,We will work on to improve the quality control process.
We can send a replacement part to you. Would you like us to add the replacement part in your next order?
By adding it to new order, you simply need to post your new order number here and we will add it manually. In order to catch up, please consider put the new order on hold first. We will release it from hold after the processing.
If you have any questions, please feel free to let us know.
Thank you for your understanding.
Sounds like they are asking if you want to wait until you order again and they will add the replacement part. Otherwise, you could just ask for them to go ahead and send it if you aren't planning another order soon.Can someone help me assume myself what action they are asking me to take? I dont have any current purchased in waiting orders but I do remember seeing something called hold my order or something on purchased but not shipped yet orders. Is my memory correct and is that what they are asking me to do once I do make my purchase? Also they responded not even 6 hours later to my request for warranty on a $4 item. I honestly just thought maybe they could tell me where to buy a new tank section but hey a free replacement is cool too
Below is what they sent that I need help with
FT: Thank you for contacting us, we are sorry for this issue,We will work on to improve the quality control process.
We can send a replacement part to you. Would you like us to add the replacement part in your next order?
By adding it to new order, you simply need to post your new order number here and we will add it manually. In order to catch up, please consider put the new order on hold first. We will release it from hold after the processing.
If you have any questions, please feel free to let us know.
Thank you for your understanding.
Purchase something. Send them your order # they will take care of sending the replacement with your order.Can someone help me assume myself what action they are asking me to take? I dont have any current purchased in waiting orders but I do remember seeing something called hold my order or something on purchased but not shipped yet orders. Is my memory correct and is that what they are asking me to do once I do make my purchase? Also they responded not even 6 hours later to my request for warranty on a $4 item. I honestly just thought maybe they could tell me where to buy a new tank section but hey a free replacement is cool too
Below is what they sent that I need help with
FT: Thank you for contacting us, we are sorry for this issue,We will work on to improve the quality control process.
We can send a replacement part to you. Would you like us to add the replacement part in your next order?
By adding it to new order, you simply need to post your new order number here and we will add it manually. In order to catch up, please consider put the new order on hold first. We will release it from hold after the processing.
If you have any questions, please feel free to let us know.
Thank you for your understanding.
The part that I'm not too sure about is when they say to put the order on hold. I think I've seen that option near the cancel my order area right after you make an order I can't recall if that's just my mind putting it there or if it was actually ever there.
Do you happen to recall after you make an order there if there is indeed a hold my order option I feel like it's near the cancel my order before it ships. That's the part I'm confused about and I do plan on making another order in fact I'm really happy they suggested it because now I have my excuse even though I know that they still send it to me even without me purchasing anything because their customer service is just that good LOL
Out of Stock: ECR Head (5pcs) And the url still says 5pcs as well as the page's htm title tag (I would email them to give them a heads up about those 2 things because they were so good to us, but I am feeling especially lazy today... maybe tomorrow, it's out of stock so it's not like they are going to sell any by then).
EDIT: Ah, what the heck... just emailed them, it only took a minute and now my conscience is clean. lol
EDIT: Ah, what the heck... just emailed them, it only took a minute and now my conscience is clean. lol
I got them for reviews and didn’t like the color of either. You can replace the buttons without replacing screens but they are sticky back so the old one might not stay in place right. They were cheap so I did both.
Similar threads
