I'm so sorry, that really stinks. My main cc was hacked in August. I caught it while the charge was pending, $2000 to vacation express.
I was totally bummed out with that one. I was SO looking forward to that Caribbean cruise.
j/k!!!!!
I was totally bummed out with that one. I was SO looking forward to that Caribbean cruise.
j/k!!!!!
I was totally bummed out with that one. I was SO looking forward to that Caribbean cruise.
j/k!!!!!
Oh geez! Why didn't you tell me? I wouldn't have been so quick to call and cancel that card.
Not 100% sure I understand, but if I am understanding correctly, if you milled that down, you will flood the coil/wick area.
The chimney section creates a "diver's bell" over the coil and wick that keeps liquid down where it should be.
Unless, I'm completely lost, which is entirely possible.
Someone will come along that knows.
I surely love my KFL+'s though. Glad I have a several for the stash.
Yeah I see what your saying but if the tank was upside down and then screwed into place before it was turned the right way round surely there would be no difference? Why would it flood? It would still have threading and act the complete same way.
I don't get it.
Yeah, I'm at 3 authentics so far.
Best vape goingEdit: I suppose you would need the chimney a couple of mm longer. But I don't get why it's separated into two individual pieces. Surely if it was 1 piece and milled to the top cap you would be fine. Obviously not though or they would have done it.
See if you can find an illustrated break down of the Nebula Wine Tank, I think that maybe that's what you're describing.Yeah I see what your saying but if the tank was upside down and then screwed into place before it was turned the right way round surely there would be no difference? Why would it flood? It would still have threading and act the complete same way.
I don't get it.
Yeah, I'm at 3 authentics so far.
Edit: I suppose you would need the chimney a couple of mm longer. But I don't get why it's separated into two individual pieces. Surely if it was 1 piece and milled to the top cap you would be fine. Obviously not though or they would have done it.
Here's the tank, the bell and chimney are one piece.
$12.87 Free Shipping SXK Nebula Wine Tank RTA Rebuildable Tank Atomizer (Wine Tank, 22mm, SS + Glass) at m.FastTech.com
You'll have to scroll through those pics.
Right. I'm alwaysbut as you guys are always here and most seem to be tootle puffers.
Kayfun lite; Correct me if I'm wrong but if you just milled the whole chimney section to the top cap, wouldn't you be able to both access the deck and also fill from the bottom.
It's either already done or doesn't work because of a,b and c.
Which is it?
If course but how about using one of these?
$2.72 Free Shipping Refilling Tool for Kayfun Lite Five Pawns Atomizer (Refilling Tool, 316 SS) at m.FastTech.com
Then you can fill your Orchid or any Kayfun with a Nano or standard chimney, rewick or rebuild without dumping THR Juice?
Whew, good.Wicked
Yeah I've got that tank and that's exactly what I mean. Why not???
Did you see my pics and post that the foam ear plug works beautifully?
Granted, the fill tool is *much* nicer, but the ear plug method is great if you want to use something you can source locally.
I've done it now a few times, and it works perfectly.
Yes Kayfuns are great. I LOVE em.Not 100% sure I understand, but if I am understanding correctly, if you milled that down, you will flood the coil/wick area.
The chimney section creates a "diver's bell" over the coil and wick that keeps liquid down where it should be.
Unless, I'm completely lost, which is entirely possible.
Someone will come along that knows.
I surely love my KFL+'s though. Glad I have a several for the stash.
The ability to switch out the lite plus base for the Monster V3 base you can switch MTL or DL hits off a Kayfun.
Got it bud. Got a proper svoemesto one. Works fine but if that idea that I proposed is achieved the kayfun lite will be unbeatable and the best kayfun there ever was, is and will be.
I've got an authentic 5 as well. Call it a waste (nearly) of £100. Lite all the way
Actually. One more thing is if svoemesto (not some 2bit operation) make a glass tank section for it. Or at least steel that you can see your juice through for the lemon or cinnamon vape.
Glad go hear it works for you but don't you either lose 10-15 drops of ejuice ot flood the barrel when you fill?Whew, good.
Did you see my pics and post that the foam ear plug works beautifully?
Granted, the fill tool is *much* nicer, but the ear plug method is great if you want to use something you can source locally.
I've done it now a few times, and it works perfectly.
With the Kayfill you wont lose those drops or flood the barrel.
I can tell just by the slight variation of the vape when mine needs filled, can't you?
It took maybe a week to get used to the all steel tank, vs. glass that I could see through, and I was apprehensive about changing, but now, I seriously have no issue not having glass.
I vape a couple things that might frost plastic, so I need glass or steel tanks.
I just got notice of cc fraud. I just checked my accounts yesterday after brnkwest got hacked and all was fine. Fortunately, Chase declined all purchases, they were all over the map. Must be low class thieves, shopped at WalMart, lol. Not implying anything wrong with WM but if I stole money, I would go for the expensive stuff. Seriously though, it is easier to get away with stuff at WM, that is the place thieves always hit from my experience and what LE told me years ago.
I doubt we are all ordering from the same places so they must have a new way to scam/hack. I just paid bills with this card so that will probably be a mess to straighten out. I HATE thieves.
I doubt we are all ordering from the same places so they must have a new way to scam/hack. I just paid bills with this card so that will probably be a mess to straighten out. I HATE thieves.
Last edited:
Someone is seriously hacking my accounts, I just got another notice that a card request was made for a really old CC # I had a few years back, CC co flagged it as fraud. So I need to call them again and see what is going on! I think I will not be using my cards for awhile until this all cools down. And this is why I never use debit cards, I had a PayPal debit card hacked years ago, at least with CC there is a time frame before payment is made. Thank goodness I don't need anything
Well, and maybe that's where the difference comes into play.
There will be a couple drops on the end of the ear plug, then whatever is on the bell housing.
But I'm pulling the bell housing and rinsing it off, when I dry burn my coil, and put in a fresh wick.
Yeah, I do think the bell would flood if you didn't pull it.
My coils just end up so nasty, I like to wash out the housing.
It amazes me that the coil is that nasty before the taste really starts to go off...kind of grosses me out, so I just wash it.
Even if it did stay dry, and not flood, you would have wobble, without the tool to stabilize everything, and prob lose the whole thing putting it back together.
The way I'm doing it, I have the deck and the housing together, and it goes into the tank, so what little that might get in the housing isn't an issue.
I really hadn't thought about all that, good point.
I can tell just by the slight variation of the vape when mine needs filled, can't you?
It took maybe a week to get used to the all steel tank, vs. glass that I could see through, and I was apprehensive about changing, but now, I seriously have no issue not having glass.
I vape a couple things that might frost plastic, so I need glass or steel tanks.
Yeah, your right but it is doable. For me aesthetics of that little dream is important. I think it looks good with the steel but I'v just ordered another lite from svoemesto and a short kayfun tank (22) to go with it.i just think glass or steel with a window would be great. Need a sick resin drip tip now and it'll go on the paps V4. Can't wait
Oh no! So sorry you got hit too
And, it's TOTALLY about personal preference, and taste.
What works for me, may not work for you and vice versa.
I wasn't challenging you at all, was just curious.
Sometimes typed words make it hard to interpret intent.
Oh, I'd love a true glass window myself.
That was part of why I clung to my Kanger ProTanks, and my IBT carto tanks for so long. I didn't want to have to put on my "big girl panties" and learn the more advanced equipment, or deal with steel tanks that you couldn't see through.
But, I am sooooo pleased that I have, and my doomsday stash is one I'm confident to go into the unknown with.
That's terrible. So sorry to hear that.
When you put the chimney back in there will be a space 6-7 mm long by 5 mm wide where Juice is in the catch cup and chimney.Well, and maybe that's where the difference comes into play.
There will be a couple drops on the end of the ear plug, then whatever is on the bell housing.
But I'm pulling the bell housing and rinsing it off, when I dry burn my coil, and put in a fresh wick.
Yeah, I do think the bell would flood if you didn't pull it.
My coils just end up so nasty, I like to wash out the housing.
It amazes me that the coil is that nasty before the taste really starts to go off...kind of grosses me out, so I just wash it.
Even if it did stay dry, and not flood, you would have wobble, without the tool to stabilize everything, and prob lose the whole thing putting it back together.
The way I'm doing it, I have the deck and the housing together, and it goes into the tank, so what little that might get in the housing isn't an issue.
I really hadn't thought about all that, good point.
That juice has to go somewhere either out the catch cup or down the chimney to flood the deck.
Similar threads
