Are you done stocking up?

rosesense

15years and counting
ECF Veteran
Verified Member
Contest Winner!
  • Jan 1, 2010
    17,708
    52,405
    TN
    All the ones I have, already have an o-ring on them. Do you mean add another 1...that doesn't fit in 1 of the little thread-like rings on it?
    Yes, add it on top to increase the diameter. I have done that with a ton of bullie tips to make them fit. Have wrapped dental floss around the oring also.I don't have the goblin, but have made it work in a ton of different tanks.
     

    rosesense

    15years and counting
    ECF Veteran
    Verified Member
    Contest Winner!
  • Jan 1, 2010
    17,708
    52,405
    TN
    OK, just took another o-ring and put it on the bottom part of 3 different 510 tips...and nope...still isn't big enough around! GGRR!!
    Try the dental floss, you can make it as thick as you need it to be. Won't show once it is on the tank and easy to snip off if too much.
     

    JCinFLA

    Vaping Master
    ECF Veteran
    Verified Member
    Oct 21, 2015
    9,419
    44,701
    Try the dental floss, you can make it as thick as you need it to be.

    Gonna take a bunch of it, because I just dug out my jewelry making calipers I use. They're very accurate. Reg. 510 drip tip (where bottom threading is), is just slightly larger than 4/16" in diameter. The glass drip tip is slightly larger than 5/16" in diameter. Doesn't seem like much in actual measurements, but that difference is nearly the thickness of 2 dimes laid on top each other.

    Edit: Forgot to say Thanks for your help! :)
     

    englishmick

    Vaping Master
    ECF Veteran
    Verified Member
    Sep 25, 2014
    6,718
    36,519
    Naptown, Indiana
    OK, just took another o-ring and put it on the bottom part of 3 different 510 tips...and nope...still isn't big enough around! GGRR!!

    I got some plumbing o-rings from Lowes hoping to use them as replacements for DTs. They seem to be the same inside diameter as regular drip tip rings but fatter. On a regular tip they are too big to fit in a 510 tank hole but they might work for you.

    They were #47, 11/32 OD, 7/32 ID, 1/16th thick. They have some other sizes you could try as well.
     

    b.m.

    Vaping Master
    ECF Veteran
    Verified Member
    Mar 30, 2014
    6,739
    21,015
    51
    Ohio
    The photo of the red to black fade almost got me yesterday but I was able to resist :D
    The picture of the green one almost got me last week haha.I have no desire for a Provari,as i vape around 40-45 watts,so it would never get used,but i seriously considered that green one,just to look at haha.
     

    b.m.

    Vaping Master
    ECF Veteran
    Verified Member
    Mar 30, 2014
    6,739
    21,015
    51
    Ohio
    Anyone have a UD Goblin Mini RTA...with the glass drip tip?

    Mine just came today, along with some other stuff from Vapor Beast. I figured when I ordered it, that I'd just replace the glass drip tip (don't like glass ones) with 1 I already have in a different material.

    Well, NO 510 drip tip I have (out of 5-6 different types & styles) will fit it. They're all too small in diameter. Called Vapor Beast to see if they knew exactly what size would fit...guy said he went and got 1...and 2 different 510's fit it, including the POM that they sell.

    So...can anyone tell me what size you've found that fits it?

    Edit: Just pulled out 2 different ones I'd ordered from FT, too, that were sold as 510s. They also do fit my other tanks that take 510 tips, but do NOT fit in the Goblin Mini either! So I'm stumped!
    Yeah,that glass drip tip is huge compared to a 510 drip tip.There are a few places that sell custom sized drip tips for the Goblin mini.One that i remember is a seller on ebay that custom makes them in a bunch of different color options,if i remember right,i think they are $15 or so though for 1 tip.
     

    JCinFLA

    Vaping Master
    ECF Veteran
    Verified Member
    Oct 21, 2015
    9,419
    44,701
    @rosesense - Ah Ha! Found & read the Goblin Mini RTA Review on here. On reading it...members said there was a machining problem with the top metal 510 drip tip part on them. They included a drip tip adapter in the little plastic baggie with extra o-rings, etc. Checked my box it came in...and yep! There was an adapter. Problem solved, I think. There was also a comment or 2 about the adapter not wanting to "stay put", but I guess I'll find out.
     

    JCinFLA

    Vaping Master
    ECF Veteran
    Verified Member
    Oct 21, 2015
    9,419
    44,701
    Thanks, too, @englishmick and @b.m. I appreciate your help, too! The guy at Vapor Beast surely did not tell me the truth then, when he said he just checked one and a regular 510 drip tip fit fine in it! Yeah...right!

    Two-bears and others in that Review said they all paid at least $11 for theirs, and I got this one for $7.17 after 10% off at Vapor Beast. Now that I found the adapter, I'll work with it to see how it works. The adapter does want to come off too, when you pull out a regular drip tip from it, and the adapter doesn't quite go all the way down in the original 510 hole. But, for the price I paid...I'll deal with it. Other than that 1 little design flaw...everyone said it was a great little RTA!
     

    Fozzy71

    Vaping Master
    ECF Veteran
    Jul 7, 2016
    3,370
    11,737
    54
    8 Mile + 2.5
    Anyone have a UD Goblin Mini RTA...with the glass drip tip?

    ....!

    I have 2 of these and 2 of the regular size goblins in my stash I haven't tried yet

    Thanks, too, @englishmick and @b.m. I appreciate your help, too! The guy at Vapor Beast surely did not tell me the truth then, when he said he just checked one and a regular 510 drip tip fit fine in it! Yeah...right!

    Two-bears and others in that Review said they all paid at least $11 for theirs, and I got this one for $7.17 after 10% off at Vapor Beast. Now that I found the adapter, I'll work with it to see how it works. The adapter does want to come off too, when you pull out a regular drip tip from it, and the adapter doesn't quite go all the way down in the original 510 hole. But, for the price I paid...I'll deal with it. Other than that 1 little design flaw...everyone said it was a great little RTA!
    sheesh, i paid way more than that. :/
     

    b.m.

    Vaping Master
    ECF Veteran
    Verified Member
    Mar 30, 2014
    6,739
    21,015
    51
    Ohio
    Thanks, too, @englishmick and @b.m. I appreciate your help, too! The guy at Vapor Beast surely did not tell me the truth then, when he said he just checked one and a regular 510 drip tip fit fine in it! Yeah...right!

    Two-bears and others in that Review said they all paid at least $11 for theirs, and I got this one for $7.17 after 10% off at Vapor Beast. Now that I found the adapter, I'll work with it to see how it works. The adapter does want to come off too, when you pull out a regular drip tip from it, and the adapter doesn't quite go all the way down in the original 510 hole. But, for the price I paid...I'll deal with it. Other than that 1 little design flaw...everyone said it was a great little RTA!
    I competely forgot about the adapter.To keep it from pulling out so easy,take the o-ring off,and wrap a turn or 2 of dental floss in the groove,then put the o-ring back on,should snug it up pretty good.
    $7 is a great deal for that rta.I paid around $18 each for mine,and i was happy at that price,i would be ecstatic at $7 haha.
     

    kross8

    Ultra Member
    ECF Veteran
    Feb 20, 2016
    2,406
    15,278
    stuck in a squishy pod called my brain
    OK, just took another o-ring and put it on the bottom part of 3 different 510 tips...and nope...still isn't big enough around! GGRR!!
    take your drip tip into autozone,, and pick one out that is 'sorta thick'. you should also be able to pick up a little 'variety pack' for $5
     

    Two_Bears

    Vaping Master
    ECF Veteran
    Verified Member
    Jul 4, 2015
    7,045
    16,673
    Northern Arizona
    Anyone have a UD Goblin Mini RTA...with the glass drip tip?

    Mine just came today, along with some other stuff from Vapor Beast. I figured when I ordered it, that I'd just replace the glass drip tip (don't like glass ones) with 1 I already have in a different material.

    Well, NO 510 drip tip I have (out of 5-6 different types & styles) will fit it. They're all too small in diameter. Called Vapor Beast to see if they knew exactly what size would fit...guy said he went and got 1...and 2 different 510's fit it, including the POM that they sell.

    So...can anyone tell me what size you've found that fits it?

    Edit: Just pulled out 2 different ones I'd ordered from FT, too, that were sold as 510s. They also do fit my other tanks that take 510 tips, but do NOT fit in the Goblin Mini either! So I'm stumped!

    Would be happy to tell you but i can't. 95% of my backup vape gear is packed up in box after box waiting for Friends to take me to my new home. I had hoped i would move a week ago.

    The GMini has a drip tip about 2 mm wider than a standard tip.
     

    Two_Bears

    Vaping Master
    ECF Veteran
    Verified Member
    Jul 4, 2015
    7,045
    16,673
    Northern Arizona
    I competely forgot about the adapter.To keep it from pulling out so easy,take the o-ring off,and wrap a turn or 2 of dental floss in the groove,then put the o-ring back on,should snug it up pretty good.
    $7 is a great deal for that rta.I paid around $18 each for mine,and i was happy at that price,i would be ecstatic at $7 haha.
    I paid $19.99 and used it till tge two piece chimney stripped the threads.

    I have three GMini in storage with bell caps, and 6 spare bell caps.
     

    Two_Bears

    Vaping Master
    ECF Veteran
    Verified Member
    Jul 4, 2015
    7,045
    16,673
    Northern Arizona
    Gonna take a bunch of it, because I just dug out my jewelry making calipers I use. They're very accurate. Reg. 510 drip tip (where bottom threading is), is just slightly larger than 4/16" in diameter. The glass drip tip is slightly larger than 5/16" in diameter. Doesn't seem like much in actual measurements, but that difference is nearly the thickness of 2 dimes laid on top each other.

    Edit: Forgot to say Thanks for your help! :)
    Our pleasure
     

    bnrkwest

    ECF Guru
    ECF Veteran
    Verified Member
    Sep 6, 2011
    10,873
    36,891
    Somewhere out there
    Gonna take a bunch of it, because I just dug out my jewelry making calipers I use. They're very accurate. Reg. 510 drip tip (where bottom threading is), is just slightly larger than 4/16" in diameter. The glass drip tip is slightly larger than 5/16" in diameter. Doesn't seem like much in actual measurements, but that difference is nearly the thickness of 2 dimes laid on top each other.

    Edit: Forgot to say Thanks for your help! :)
    Do you have any carto condoms laying around? Maybe that would help if you cut it to size and put the o ring over it??
     

    BreSha6869

    Vaping Master
    ECF Veteran
    Verified Member
    Nov 21, 2015
    4,876
    18,564
    56
    Toronto, Canada
    I found this recipe on another site and just tested it by adding some CCI to my BCR tester. It adds a nice extra layer to the one shot:


    Baked Cinnamon Roll CCI
    13.30% Baked Cinnamon Roll (OSDIYS)
    5.00% Cream Cheese Icing (LA)

    That sounds good. I need to order some CCI with my next flavour order.

    I made my wife a new recipe literally an hour ago as she loves cinnamon bakery style vapes. Not really my thing, but she loves this stuff.

    Cinnamon Danish (CAP) - 8%
    Cinnamon sugar cookie (TFA) - 6%
    Vanilla bean ice cream (CAP) - 4%

    Edit: I decided to give this a try a vape a bit of it. It's REALLY friggin' good! A bit sweet for me but tastes like any of the similarly flavoured $20/30ml "super premium" juices I have had.

    Made a 5ml to test and just whipped up another 100ml for my wife. She says it is the best DIA I have made. I prefer my strawberry custard, but this is great if you like this kinda thing...
     
    Last edited:

    Users who are viewing this thread