Are you done stocking up?

[BreSha6869]

Reason #872 to stock up on replacement parts....

Today I unscrewed the top from the base of my Subtank Mini over the sink to refill and the top of the rba goes kerplunk into the sink. See ya.

Thought the teenie weenie screw holding the RBA together was on tight, but I guess not.

No stopper and I am not taking my sink apart to retrieve a piece of a $6 RBA. Without the RBA top, the tank is useless though.

I have a few extra RBAs and was vaping again within a few minutes.

 

[JCinFLA]

Today I unscrewed the top from the base of my Subtank Mini over the sink to refill and the top of the RBA goes kerplunk into the sink. See ya

It should still be in the J part of the pipe below the opening...if you haven't run water through there yet. Get1 of these 2 things and you can easily pull it out:

1) One of those flexible magnetic tools that mechanics use to reach dropped metal things in/around an engine

2) Attach a magnet to a piece of string, cord, unbent metal coat hanger, etc. and use it down the drain to pull it out.

Otherwise, it's no big deal to unscrew just the 2 connections that hold that J part of the drain, to remove the J and get it. I'm a 64 year old lady and I've done it before. I'm sure you can, too!

 

[BreSha6869]

It should still be in the J part of the pipe below the opening...if you haven't run water through there yet. Get1 of these 2 things and you can easily pull it out:

1) One of those flexible magnetic tools that mechanics use to reach dropped metal things in/around an engine

2) Attach a magnet to a piece of string, cord, unbent metal coat hanger, etc. and use it down the drain to pull it out.

Otherwise, it's no big deal to unscrew just the 2 connections that hold that J part of the drain, to remove the J and get it. I'm a 64 year old lady and I've done it before. I'm sure you can, too!

Awesome. Those broken Fasttech Nemesis magnets just might come in handy!

 

[Bonskibon]

Got some stock coils from ecig.com for Nautilus/Triton minis I have. Five packs for 30.00 after coupon and shipping included.... not to shabby.

 

[JCinFLA]

@BreSha6869 - If your piping below your sink is PVC pipe...taking those 2 couplings apart will be no big deal at all, piece of cake actually! But I'd try the magnet method first.

 

[BreSha6869]

It should still be in the J part of the pipe below the opening...if you haven't run water through there yet. Get1 of these 2 things and you can easily pull it out:

1) One of those flexible magnetic tools that mechanics use to reach dropped metal things in/around an engine

2) Attach a magnet to a piece of string, cord, unbent metal coat hanger, etc. and use it down the drain to pull it out.

Otherwise, it's no big deal to unscrew just the 2 connections that hold that J part of the drain, to remove the J and get it. I'm a 64 year old lady and I've done it before. I'm sure you can, too!

OK, good idea in principle.... but the RBA top isn't magnetic. In any case, lost the magnets and removed the trap (yuck!) and my parts are all safe and sound.

 

[JCinFLA]

Yippee! Glad you got the parts! Yeah, the yuck in the trap is not nice stuff, but...gave you the chance to also clean it all out before reinstalling it.

 

[cats5365]

OK, good idea in principle.... but the RBA top isn't magnetic. In any case, lost the magnets and removed the trap (yuck!) and my parts are all safe and sound.

Yay!

Next time you are at the store cruise down the sink parts aisle and see if you can find one of those little flat plastic disks with the holes in them. I keep one over the garbage disposer hole after fishing my dental bridge out. There was no question about whether I was going to find that sucker and clean it off.

It doesn't stop any water, but unless something is really tiny, nothing goes down the hole if you drop it in the sink. I have one on the other side too, but it is mostly to keep the cat fuzzies from blocking the drain. These are easier to clean than the normal strainer/plugs and can go in the dishwasher.

 

[Vikaernes]

Procyon arrived yesterday... I might be done stocking up regulated devices now.

 

[beckah54]

Let us know what ya buy haha.

Sigh......I went back to ecig.com today and bought 2 picos. I seriously need help........must quit reading this thread.

 

[b.m.]

Sigh......I went back to ecig.com today and bought 2 picos. I seriously need help........must quit reading this thread.

haha,you sound just like me.Anytime i say i won't look anymore,that lasts about 30 minutes.I told my wife i was done getting the expensive stuff,and would only spend like $20 every once in a while,that lasted about a week until i seen a thread about a mod i really want,and at a great price,so i had to splurge 1 more time,but i swear i'm done after that haha.

 

[beckah54]

I know, right? We needs stuff. lol

 

[Fozzy71]

Sigh......I went back to ecig.com today and bought 2 picos. I seriously need help........must quit reading this thread.

haha, i got 2 of those in my cart and a few rta/rda but have fought off the urge to this point as I really need to let my cards cool off. Went out for my daily walk and couldn't resist the new rda urge so stopped in my local shop and grabbed a goon for about $27 out the door.

 

[bnrkwest]

I don't know...think I need more kanthal & SS316L?

Sent from my iPhone using Tapatalk

I feel wire deficient now! LOL

 

[BackDoc]

Why do I feel the sudden need to buy more wire?

 

[Mrmik]

I have an authentic Tsunami 24 and love it on my mechs as a RDA. Mine doesn't have the window so I ordered the FT clone (With window) so I could use it for squonking.

I haven't got my clone yet, but I have seen one in the flesh and it seems pretty damned close to the authentic.

Did yours come with the hollow BF pin?

Yes, it did come with that hollow pin. Have not yet used it with my squonker kit, Movkin Disguiser.

 

[schismz]

I feel wire deficient now! LOL

You need more, 17 lifetimes worth of wire isn't enough, nobody is ever safe until they have 32 lifetimes worth of wire! And then... you'll decide that you really need a completely different kinda wire and start over again. Wheeeee!

 

[Fozzy71]

haha, i got 2 of those in my cart and a few rta/rda but have fought off the urge to this point as I really need to let my cards cool off. Went out for my daily walk and couldn't resist the new rda urge so stopped in my local shop and grabbed a goon for about $27 out the door.

loving this thing and now I see what all the rda love is about (have 2 others but nothing like this in terms of performance)... but...... got a dry hit on my fused claptons trying to see how long I could go on X drips (still not sure how many drips I can put thru the tip without a leak) so I will be rebuilding it tomorrow with some twisted SS316L to run it in TC mode.

 

[englishmick]

I don't know...think I need more kanthal & SS316L?

Sent from my iPhone using Tapatalk

That's quite a stash. I just picked up a couple of 250 ft reels, a 30 and a 28 from the LV sale. Didn't have much before that. People say you will be able to get Kanthal from non-vaping sources but you know what you are getting from LV. Going to a wire supplier would take some research and I'm lazy. It's so cheap anyway. I haven't calculated how long it will last me but probably longer than I'll be around. I'm lazy about changing coils as well.

One thing I worry about with large reels is having them unravel on me. Couple of weeks ago I lost my grip on an almost new 25 ft reel and it all came off. It wasn't that hard to get it back on the reel but I would hate to have to do that with a 250 ft reel.

 

[Fozzy71]

.....
One thing I worry about with large reels is having them unravel on me. Couple of weeks ago I lost my grip on an almost new 25 ft reel and it all came off. It wasn't that hard to get it back on the reel but I would hate to have to do that with a 250 ft reel.

https://smile.amazon.com/gp/product/B00KAZ137Y/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1