Are you done stocking up?

[LoriP1702]

Okay, I ordered 3 more rta's.
For my doomsday stash, I'd ordered several authentic KFL+s, and one KFM V3. I didn't go overboard, but enough for a comfortable stash.

I keep reading how good the EHPro KFL+'s are, so I picked up 2 of those, in stainless.
I've also wanted to try a KF5, but with reviews kind of all over the place, I didn't want to spring for the authentic.
I like an airier draw, so I'm hoping I will like it...so I picked up one of those too. I also like that it comes with a stainless tank, I've gotten used to them, and I'd rather not have to worry about broken glass.
eBay/US Sellers.

I have vapemail coming!!

 

[Flowersoul]

I am just starting with Kayfuns...I have an original one, and really didn't take to it cause it's so heavy, but am revisiting the lite plus and the mini v3.....have a lot of the STMs and Merlins and others. Have the Ephro LIte v2, but it is packed in the stash cabinet so haven't even tried it yet.
So, not sure about what to get at this point although leaning towards the mini v3 cause I like the looks of it.
But, I can get the Lite Plus, too! All clones.

 

[b.m.]

Aah, F/T order is out for delivery......my gosh.....12 days from order date to delivery......one of the fastest yet!
Makes me want to put in one last (or two) order! I just may!

Oh, and I detest clowns.....

The best i've ever had from FT was 6 days from order to delivery,i was amazed haha.

I don't like clowns either.I used to,until my 9th birthday.My mom hired a clown for my birthday party.This woman was so drunk she could barely stand up,and you could smell the alcohol 3 feet away from her.I always thought clowns were supposed to be funny,but this one was down right terrifying haha.

 

[Haktuspit]

Has anyone read the response to the FDA? I was actually cheering at the computer. I hope they crush the FDA.
Joint Petitioners Opposition and Reply Brief - AS FILED.pdf

Yes and loved it! This justified all of those times I was the only one saying I felt really good about the court case. FDA has nothing... We've got this!

 

[LoriP1702]

I am just starting with Kayfuns...I have an original one, and really didn't take to it cause it's so heavy, but am revisiting the lite plus and the mini v3.....have a lot of the STMs and Merlins and others. Have the Ephro LIte v2, but it is packed in the stash cabinet so haven't even tried it yet.
So, not sure about what to get at this point although leaning towards the mini v3 cause I like the looks of it.
But, I can get the Lite Plus, too! All clones.

I think the KFL's are heavy, but I don't have any health issues, and my arm can use the toning...at least that's what I tell myself.
I like the mini 3, except for the teeny tiny deck, and I haven't completely made friends with the AFC, but that's on me, not the RTA.
I haven't tried it yet, but I got the Coilmaster Tab thing, so I hear it makes building much easier. I've never used anything but my hands to build with, nothing to secure the deck.
Hoping it makes the tinier deck easier.

I absolutely love the BF RM2's, those really have spoiled me, but I love the vape on the KFL's too.

 

[Flowersoul]

I think the KFL's are heavy, but I don't have any health issues, and my arm can use the toning...at least that's what I tell myself.
I like the mini 3, except for the teeny tiny deck, and I haven't completely made friends with the AFC, but that's on me, not the RTA.
I haven't tried it yet, but I got the Coilmaster Tab thing, so I hear it makes building much easier. I've never used anything but my hands to build with, nothing to secure the deck.
Hoping it makes the tinier deck easier.

I absolutely love the BF RM2's, those really have spoiled me, but I love the vape on the KFL's too.

Had to laugh (at the bold)!

Although I like a bigger deck, I can handle the tiny one....rebuilt the Evods a long time ago, so I think I"m OK with that.
I have the CoilMaster v3 and yes, it makes it easier! Makes a pretty coil, to be sure!

Oh, I love the RM2 on my REOS......easiest build deck I've seen compared to some of the others.

 

[LoriP1702]

Had to laugh (at the bold)!

Although I like a bigger deck, I can handle the tiny one....rebuilt the Evods a long time ago, so I think I"m OK with that.
I have the CoilMaster v3 and yes, it makes it easier! Makes a pretty coil, to be sure!

Oh, I love the RM2 on my REOS......easiest build deck I've seen compared to some of the others.

If the Evods were like the original Kanger ProTank coils, yeah...got THAT t-shirt. Could prob build those in my sleep.

My Coilmaster is the ohm reader thing, I don't know what the V3 is, will have to google. I haven't looked it over completely, but I don't think it's for wrapping coils...I'll go have a look see.

Yes, on the Reo. They've really spoiled me for much of anything else. I've often kicked myself for just not buying 12 to 15 of those. I'd like to get two more of those too.
I don't know, I might be getting to the point of overkill. I have 6. What do you think? I just don't know how many years to expect out of one.
Did you get a P67 last night?
I didn't try for one. If things get turned around down the road I might, but for now, I have loads of parts for the 2 LP Grands I have, and I'm going to stick with those.
Honestly, there's only so much I can justify in one year...and I'm about there.

I have 2 of the Velocity BF Mini's, I tried one the other day, but I need to decrease my nic (I think) for that one. It was a bit bold.

ETA: Mine is just the ohm reader, not sure what else, but I don't think it has a coil jig.

 

[MikeE3]

I am just starting with Kayfuns...I have an original one, and really didn't take to it cause it's so heavy, but am revisiting the lite plus and the mini v3

You could try replacing the 3 piece (2 SS parts & clear tank section) stock tank w/ just a clear M-Tank. It lightens it up a tad. Janet and I like the KFL V3 mini ... but the deck screws are tiny and it can be fiddly getting the wire leads snugged down.

 

[Flowersoul]

If the Evods were like the original Kanger ProTank coils, yeah...got THAT t-shirt. Could prob build those in my sleep.

My Coilmaster is the ohm reader thing, I don't know what the V3 is, will have to google. I haven't looked it over completely, but I don't think it's for wrapping coils...I'll go have a look see.

Yes, on the Reo. They've really spoiled me for much of anything else. I've often kicked myself for just not buying 12 to 15 of those. I'd like to get two more of those too.
I don't know, I might be getting to the point of overkill. I have 6. What do you think? I just don't know how many years to expect out of one.
Did you get a P67 last night?
I didn't try for one. If things get turned around down the road I might, but for now, I have loads of parts for the 2 LP Grands I have, and I'm going to stick with those.
Honestly, there's only so much I can justify in one year...and I'm about there.

I have 2 of the Velocity BF Mini's, I tried one the other day, but I need to decrease my nic (I think) for that one. It was a bit bold.

ETA: Mine is just the ohm reader, not sure what else, but I don't think it has a coil jig.

Yes, the CoilMaster v3 is the coil builder with mandrels from 1.5 to 4 mm.
The ohm reader is the rectangular lil thingy that reads ohms and volts.

6 REOs sounds like a decent stash, but if there is anything that is just about foolproof, it's the REO. If you use more than 6 flavors, I would say go ahead and get enough for at least 7 flavors.

Yes, I did get a hammertone P67 last night. A friend snagged it for me cause we had a prior dinner date w/friends and didn't want to miss it. I now have 2 grands and a P67.

 

[oplholik]

Does the Kayfun Clear M-Tank Body by HCigar fit the Ehpros KFL's, if so, I gotta get a couple of those.

 

[Flowersoul]

You could try replacing the 3 piece (2 SS parts & clear tank section) stock tank w/ just a clear M-Tank. It lightens it up a tad. Janet and I like the KFL V3 mini ... but the deck screws are tiny and it can be fiddly getting the wire leads snugged down.

Oh, that is a good idea, Mike.....I know how much you and Janet like them, and I've often wondered why I never felt the love! Maybe just a matter of adapting.
I won't be purchasing the authentic and have the mini v3 in my F/T shopping cart now. Hope that fills the bill....

 

[LoriP1702]

Yes, the CoilMaster v3 is the coil builder with mandrels from 1.5 to 4 mm.
The ohm reader is the rectangular lil thingy that reads ohms and volts.

6 REOs sounds like a decent stash, but if there is anything that is just about foolproof, it's the REO. If you use more than 6 flavors, I would say go ahead and get enough for at least 7 flavors.

Yes, I did get a hammertone P67 last night. A friend snagged it for me cause we had a prior dinner date w/friends and didn't want to miss it. I now have 2 grands and a P67.

Oh, noooooo I have 2 Reos, 6 RM2's.
I'm not worried about the longevity of the Reosmods, just the RM2's. I only started using a Reo/RM2 this year, so I don't know what to expect on the atty.

Oh that's awesome on the P67!! I'm so excited for you!!

 

[Flowersoul]

I'm excited, too! Resisted for a very very long time, but now, under the circumstances, resistance was futile.

I probably have one more large purchase, and then, I'm really done...no, really!

 

[phonedude]

My first Kayfun

Received it this morning. At first I found it a little fiddly. After using the Kanger subtank mini's for years it seemed to have too many moving parts.

But after I got it figured out and put together I was very pleased. Easy to coil and it vapes like a dream. The airflow is just perfect for me. That was one of my main concerns.

So I guess I won't be done stocking up now until I get another as a backup.

 

[MikeE3]

Does the Kayfun Clear M-Tank Body by HCigar fit the Ehpros KFL's, if so, I gotta get a couple of those.

We've got original Svoe KFL-lites and Ehpro's ... generic M-Tanks for the KLF-lite fit/work with both of them. I'd say (but don't have personal experience w/ 'em) the HCigar M-Tank would fit the Ehpro.

Oh, that is a good idea, Mike.....I know how much you and Janet like them, and I've often wondered why I never felt the love! Maybe just a matter of adapting.
I won't be purchasing the authentic and have the mini v3 in my F/T shopping cart now. Hope that fills the bill....

Janet really likes her KFL-lite nano's better than the full size w/ an M-Tank. The diameter is still 22mm but the tank is shorter. Ehpro marketed the nano version and FT had nano chimneys and plastic tanks. I don't know if they're still available.

 

[LoriP1702]

I'm excited, too! Resisted for a very very long time, but now, under the circumstances, resistance was futile.

I probably have one more large purchase, and then, I'm really done...no, really!

As well you should be, I hear they're a DREAM!!
I wasn't caught up on the other thread or I would have seen you got one.

Thankfully, I don't have anymore large purchases that are *needs*.
Honestly, I don't really need anything else, I just wanted to try the things I ordered today, and have for back ups, for...um...backups.

My first Kayfun

Received it this morning. At first I found it a little fiddly. After using the Kanger subtank mini's for years it seemed to have too many moving parts.

But after I got it figured out and put together I was very pleased. Easy to coil and it vapes like a dream. The airflow is just perfect for me. That was one of my main concerns.

So I guess I won't be done stocking up now until I get another as a backup.

VERY NICE!! It's wonderful to have a combo that's pleasing!!

I don't know the size of that mod, so I can't tell if that's a mini or a 5.

 

[phonedude]

As well you should be, I hear they're a DREAM!!
I wasn't caught up on the other thread or I would have seen you got one.

Thankfully, I don't have anymore large purchases that are *needs*.
Honestly, I don't really need anything else, I just wanted to try the things I ordered today, and have for back ups, for...um...backups.


VERY NICE!! It's wonderful to have a combo that's pleasing!!

I don't know the size of that mod, so I can't tell if that's a mini or a 5.

It's the V5. Yep vaping happy today.

 

[Wow1420]

Has anyone read the response to the FDA? I was actually cheering at the computer. I hope they crush the FDA.
Joint Petitioners Opposition and Reply Brief - AS FILED.pdf

I'm half way through now and feeling so much better about our chances at a favorable decision.

 

[LoriP1702]

It's the V5. Yep vaping happy today.

Cool, I'm getting excited to try mine now.

 

[oplholik]

I have this s/u on one of my Provaris, the blue. It's just an FT bell cap and it has the original chimney top. I had to drill out the bottom of the drip tip so it would fit over the chimney top. It does shorten it up but doesn't look as good as the Kayfun Clear M-Tank Body by HCigar.