You might try turning down the air flow on the Melo, that should help with flavor. Also turn watts down a bit.
Last edited:
AF is as closed as I can get it and if I turn w down, it spits and gurgles. Guess I will have to increase flavor percentage and try that. I will play with it. It gets pretty hot even with a heat sink. Perhaps it will get better with a break in period. It is a new coil, factory installed one so probably the lowest ohm, I didn't check.You might try turning down the air flow on the Melo, that should help with flavor. Also turn watts down a bit.
I am just curious as to what, if any, flavor someone would get at 200w, not that I am going to be doing that.
I told myself a few weeks ago that if there was anything I though I needed from FT that I'd place one more order in 2016 when they had their next 10% off sale and then be done shopping there in 2016. I got my cart ready this morning
My cart consist of a few more factory coils for grandson's TFV4, and since I have so many coils now for my Melo 3 I decided I needed one more Melo 3 tank since I only have two to be sure twenty years from now I wouldn't be sitting here with coils and no tank to use them in, and replacement glass for my Melo's and Serpent. I've never broken a glass tank but I know it can happen at any time so I'd rather have it and never need it then not have it and find myself without it. Oh and one more charger for my Ego Twist. I found I have a bunch of those twist in my stash and decided if I wanted to give any away I should have a charger to go with them .
My cart consist of a few more factory coils for grandson's TFV4, and since I have so many coils now for my Melo 3 I decided I needed one more Melo 3 tank since I only have two to be sure twenty years from now I wouldn't be sitting here with coils and no tank to use them in
, and replacement glass for my Melo's and Serpent. I've never broken a glass tank but I know it can happen at any time so I'd rather have it and never need it then not have it and find myself without it. Oh and one more charger for my Ego Twist. I found I have a bunch of those twist in my stash and decided if I wanted to give any away I should have a charger to go with them .
Somewhere you posted about a label maker you use and really like.
Can you share that info again.
I thought I saved the link, or the name of it, but I can't find it now.
I think I will go ahead and get one, I've wanted one for a long time now for other things non-vape related, and just think it would be sooooo much easier than the Avery printer labels.
I think in your post you mentioned you'd gone down that road, printer labels, shipping tape, goo gone, etc.
I'd personally like to skip that part.
Thanking you in advance.
When I hear of these high watts, it is like a foreign language to me LOL My lowest ohm is 1.0 and my highest watt is 15!
Somewhere you posted about a label maker you use and really like.
Can you share that info again.
I thought I saved the link, or the name of it, but I can't find it now.
I think I will go ahead and get one, I've wanted one for a long time now for other things non-vape related, and just think it would be sooooo much easier than the Avery printer labels.
I think in your post you mentioned you'd gone down that road, printer labels, shipping tape, goo gone, etc.
I'd personally like to skip that part.
Thanking you in advance.
Not sure if this is the one he mentioned or not (I think I got this from the Juice Calculator thread actually) but here is the one I plan to buy eventually - https://smile.amazon.com/gp/product...sfl_title_8?ie=UTF8&psc=1&smid=A2HGGGZVTGDHQ5
When I hear of these high watts, it is like a foreign language to me LOL My lowest ohm is 1.0 and my highest watt is 15!
I never thought I'd say that I sometimes use a .3 ohm coil at 28 watts but I do and I like it
Yeah,it is much easier,and makes me want to experiment more.I have made hundreds of multi flavor recipes over the last couple years,and while some have been great,most were not good enough to me to make them again,so i have a lot of wasted time involved haha.I know some people really enjoy mixing,but personally i don't,i only started mixing in the beginning because of the cost savings,but now due to the regs,i'm glad i started when i dd so i had plenty of time to learn,but if i can find a few of these that i really like,it will definitely save me a lot of time haha.Exactly
All together so far,i have 12 of the rf,and i have 6 of the one stop flavors.3 of the os,i have had a while,and they were ok,but the 3 i just got last week will hopefully be better,and will give me more easy options.
What I like now is many of the blended flavors are so good right off the bat you don't even need sweetener! I love that
My DIY in 2011-2012 was just ok, I was not really impressed. Now with all these great flavors I am very impressed with DIY
I am really liking my Peach Southern Sweet Tea, I mixed the flavors separate and mixed the juices in my tank about 1/3 tea & 2/3 Juicy Peach and it is not cracking my tank on Kayfun
That doesn't look like the one I saw.
That's a nice one though!
I'll do a forum search if he doesn't pop in.
I sometimes forget about being able to do that.
I have never liked any tea flavors but just yesterday mixed up the RF sweet tea and really liked it. Didn't add anything else to it but might try the peach later.I am really liking my Peach Southern Sweet Tea, I mixed the flavors separate and mixed the juices in my tank about 1/3 tea & 2/3 Juicy Peach and it is not cracking my tank on Kayfun
I haven't tried RF sweet tea, need to put that in my list. I got hooked on teas thru ahlusion juices, plus I drink a lot of tea
@bnrkwest - Was it the Ego One tanks that you said you liked so well, or was it another similar one? Reason I ask is if it was that one and you want more, and/or coils for it...please PM me. I found some on a 50% sale.
Likewise!
I have had my rack of 50+ flavors sitting in the way on my desk for a few days now. More than half of these bottles are unopened and I am trying to get done with mixing. Need to do my favorite ADV (Hazelnut/French vanilla/Butter) batch as I consume about 200 ml of it per month. Easy say hard to do it is.
Oh yeah, I am getting low on that Hazelnut flavor so need to stock up. (staying on topic)
Just bought a coil masterV4 . Hands are not what they used to be and this will easliy help me make
a bunch to store away.
a bunch to store away.
Is the label maker just to make pretty? I have considered them but it is easier to just use a perm marker and magic eraser (to write directly on the bottle) so I have resisted another gadget to drag out. Would be good if I had another use for it, I suppose.Somewhere you posted about a label maker you use and really like.
Can you share that info again.
I thought I saved the link, or the name of it, but I can't find it now.
I think I will go ahead and get one, I've wanted one for a long time now for other things non-vape related, and just think it would be sooooo much easier than the Avery printer labels.
I think in your post you mentioned you'd gone down that road, printer labels, shipping tape, goo gone, etc.
I'd personally like to skip that part.
Thanking you in advance.
Similar threads
