Are you done stocking up?

JCinFLA

Vaping Master
ECF Veteran
Verified Member
Oct 21, 2015
9,422
44,703
Anyone needing more nic base may want to give Heartland Vapes a try tomorrow. They're having a 20% off sale (everything except empty bottles & eliquids). Code is Cyber18.

Their regular 100mg/mL is already inexpensive @ just $44.99/Liter, but with the discount it's only $35.99! It's very good nic base, too, IMO. Several liters in my stash are from them.
 

Vandal

Super Member
ECF Veteran
Verified Member
Oct 21, 2009
799
3,357
NE Ohio
I see we are still stocking up. :eek:

I can't believe this thread is over 2 years old and still going strong. I bought a lot of stuff back then and stored it all away for vapocalypse. I just started going through it all today and realized most of it has mainly historical value. ;) I was going for the older tried and true stuff.

I thought doomsday was upon us, but turns out it's been very slow rolling. At any rate, I've been getting the itch for vape shinies and now am thinking I might want to get some more up to date gear. I have just moved though, into a much bigger place, and I'm having to buy a lot of furnishings (curtains, rugs, furniture), so I have to be selective.

Looking forward to seeing what bargains you all come up with!
 

NolaMel

ECF Guru
ECF Veteran
Verified Member
Nov 17, 2012
12,815
80,994
New Orleans
I see we are still stocking up. :eek:

I can't believe this thread is over 2 years old and still going strong. I bought a lot of stuff back then and stored it all away for vapocalypse. I just started going through it all today and realized most of it has mainly historical value. ;) I was going for the older tried and true stuff.

I thought doomsday was upon us, but turns out it's been very slow rolling. At any rate, I've been getting the itch for vape shinies and now am thinking I might want to get some more up to date gear. I have just moved though, into a much bigger place, and I'm having to buy a lot of furnishings (curtains, rugs, furniture), so I have to be selective.

Looking forward to seeing what bargains you all come up with!
I bought some goodies over the holiday...but in the long run, I’m betting the provaris and reos and mechs of old will still be running when some of the current stuff gives up the ghost.
 

Philabos

Super Member
ECF Veteran
Aug 9, 2017
317
1,016
77
Couldn't resist the ehpro 101 for cheap at eciggity, also got an armor and finally a mech Sqounk which I hope never to use, but need it just for insurance. A decent rda topped off my free shipping all at discount.
I think I am now fully stocked with mods, nic, flavors.
Only started vaping 15 months ago so my stock up time frame was a lot shorter than most here.
About 90% of my expense in the last 6 months was for stock up but I think I have finally arrived at a good spot.
Learned important info on this forum which led me to not only be prepared but also to DIY and coil build.
I really don't think a day goes by that I don't learn something new on these forums.
So, thanks to all who contribute here.
 

bnrkwest

ECF Guru
ECF Veteran
Verified Member
Sep 6, 2011
10,873
36,891
Somewhere out there
Couldn't resist the ehpro 101 for cheap at eciggity, also got an armor and finally a mech Sqounk which I hope never to use, but need it just for insurance. A decent rda topped off my free shipping all at discount.
I think I am now fully stocked with mods, nic, flavors.
Only started vaping 15 months ago so my stock up time frame was a lot shorter than most here.
About 90% of my expense in the last 6 months was for stock up but I think I have finally arrived at a good spot.
Learned important info on this forum which led me to not only be prepared but also to DIY and coil build.
I really don't think a day goes by that I don't learn something new on these forums.
So, thanks to all who contribute here.
Good job! :thumbs:
 

bnrkwest

ECF Guru
ECF Veteran
Verified Member
Sep 6, 2011
10,873
36,891
Somewhere out there
I see we are still stocking up. :eek:

I can't believe this thread is over 2 years old and still going strong. I bought a lot of stuff back then and stored it all away for vapocalypse. I just started going through it all today and realized most of it has mainly historical value. ;) I was going for the older tried and true stuff.

I thought doomsday was upon us, but turns out it's been very slow rolling. At any rate, I've been getting the itch for vape shinies and now am thinking I might want to get some more up to date gear. I have just moved though, into a much bigger place, and I'm having to buy a lot of furnishings (curtains, rugs, furniture), so I have to be selective.

Looking forward to seeing what bargains you all come up with!
I bought a few newer mods and tanks, but I am also betting my old stuff will last for years and years :)
 

Vandal

Super Member
ECF Veteran
Verified Member
Oct 21, 2009
799
3,357
NE Ohio
Ok, so I guess I have been out of the Provape market for some time now. But what's all this talk about Provape going out of business? When did that happen?

I guess I'll never get my Provari working again. :(
They closed a couple of years ago, reason given was the FDA regulations.

I did end up with 3, and I have yet to use a single one. I'm going to have to remedy that and figure out what I want to use them with.
 

Katdarling

I'm still here on ECF... sort of. ;)
Supporting Member
ECF Veteran
Verified Member
Jan 25, 2011
32,594
167,896
Utopia
Here's a posture pedic bed I made for Daisy, this is what she did to it! Ack! Like I said the destroyer LOL And she looks so sweet and innocent:)

We had a huge foam bed for Mr. Hercules (Lab) at one time. Went out for the eve and came back to ... "where's the bed???"

He got that VERY large bed out the VERY small dog door, and I found "SNOW" allllllllll over my yard. Kali. Snow.

Labrador. :D



They closed a couple of years ago, reason given was the FDA regulations.

I did end up with 3, and I have yet to use a single one. I'm going to have to remedy that and figure out what I want to use them with.



Vandal dear one! Other than my Eggies (1 ohm coils), I use most everything on my Provis.

Old skool, new skool, any skool. ;)


20151224_143952.jpg


20161120_083934 crop.jpg





20160416_131832.jpg
 

optsmk

Ultra Member
ECF Veteran
Sep 4, 2009
1,022
729
Pleasanton, Ca.
They closed a couple of years ago, reason given was the FDA regulations.

I did end up with 3, and I have yet to use a single one. I'm going to have to remedy that and figure out what I want to use them with.
Damn, that's too bad. They were way too expensive. But a few years ago I decided I just had to have one. It was money well spent. I don't remember exactly when I bought mine. But this is these are the earliest pics I have of it. The pics were taken back in May of 2014. I'd be really happy if I could get it to work again.
Provari1.jpg
Provari2.jpg
 

bnrkwest

ECF Guru
ECF Veteran
Verified Member
Sep 6, 2011
10,873
36,891
Somewhere out there
Damn, that's too bad. They were way too expensive. But a few years ago I decided I just had to have one. It was money well spent. I don't remember exactly when I bought mine. But this is these are the earliest pics I have of it. The pics were taken back in May of 2014. I'd be really happy if I could get it to work again.
View attachment 782271 View attachment 782273
What is the problem with it ? Have you cleaned it? I had one that would not do anything and was told to clean the threads really well, low and behold it worked :) Also the inside batt connection should be shiny, a pen eraser works well to clean off any film. There is a seller on eBay, his user name is Provape-parts, you could ask him if he knows anyone servicing them.
 

optsmk

Ultra Member
ECF Veteran
Sep 4, 2009
1,022
729
Pleasanton, Ca.
What is the problem with it ? Have you cleaned it? I had one that would not do anything and was told to clean the threads really well, low and behold it worked :) Also the inside batt connection should be shiny, a pen eraser works well to clean off any film. There is a seller on eBay, his user name is Provape-parts, you could ask him if he knows anyone servicing them.
I don't really remember what the problem was. But I just pulled the old Provari out of my vape stash and took a look. I don't have any charged batteries, so I put on on the charger. I'll fire it up once the battery is charged and see what it's doing.
 

optsmk

Ultra Member
ECF Veteran
Sep 4, 2009
1,022
729
Pleasanton, Ca.
What is the problem with it ? Have you cleaned it? I had one that would not do anything and was told to clean the threads really well, low and behold it worked :) Also the inside batt connection should be shiny, a pen eraser works well to clean off any film. There is a seller on eBay, his user name is Provape-parts, you could ask him if he knows anyone servicing them.

I got the battery charged up and fired it up. Seems like it's working fine. The problem is that the glass window is broken and one of the LED segments is out. That must have been the reasons why I stopped using it. I suppose if I could a new board and glass window, it would be good as new. MAybe I'll see if the parts are available. It was a really good vape.
 

Katdarling

I'm still here on ECF... sort of. ;)
Supporting Member
ECF Veteran
Verified Member
Jan 25, 2011
32,594
167,896
Utopia
Aww, that's too bad. How'd you figure that out?

It's been widely discussed, primarily in the Provape Saloon thread, and in some others. When Provape decided to end their business venture, they did so without any hints of returning. It was shattering to many of us Provarinatti.


ProVarinati Diner & Saloon and Beyond
 

Users who are viewing this thread