Are you done stocking up?

[kross8]

I am waiting for adhesive backed insulators from FT before I rewrap my second set of batteries. Screw holding the insulator in place. It's too hot. Next time I will try to find my heat gun too.

buy a basic glue stick,, it will hold long enough to get the wrapper shrunk down

 

[fiddleshe]

LOL. I do vape in the bathroom when I take a family member to the hospital. At one hospital I know where just about every single-person bathroom is in that hospital. Lock the door, take a vape, blow it up to the vent in the ceiling.

Vapers have told me they think that is so low class to go to the bathroom to vape, but it beats having to walk a mile to go outside then another mile back in (you think I'm joking, three are very few entrances/exits in that hospital, it's a hike and half to get outside from where I usually am). Not to mention, when it's really hot or cold, who TF wants to go outside? No one can smell my vape, I usually just vape straight-up peppermint flavor, no smell.

My mom lives in an apartment complex that has banned vaping. You have to go out to the street to vape. She wont let me vape in her apartment anyways so I wont visit her. It's BS that I have to walk all that way to vape. Im not hurting anyone and it doesnt smell.

 

[Terri McVeety]

These might be helpful...



Reddit: Custom Battery Wraps Tutorial

***

I think a heat gun is necessary

 

[kross8]

Looks not too bad, it’s not shrunk up enough so krinkles when I touch it

Go put it in your sink,, hit it with a blow dryer on high..let it roll around in the sink during the process,, (borrow your neighbor blow dryer if you don't have one) the sink is great for letting the battery roll around evenly

 

[UncLeJunkLe]

My mom ... wont let me vape in her apartment ... so I wont visit her.

 

[fiddleshe]

Go put it in your sink,, hit it with a blow dryer on high..let it roll around in the sink during the process,, (borrow your neighbor blow dryer if you don't have one) the sink is great for letting the battery roll around evenly

I hope you go to your neighbors with wet hair!

 

[fiddleshe]

Well it's not the only reason. We also don't get along anymore.

 

[kross8]

My mom lives in an apartment complex that has banned vaping. You have to go out to the street to vape. She wont let me vape in her apartment anyways so I wont visit her. It's BS that I have to walk all that way to vape. Im not hurting anyone and it doesnt smell.

When I stay in hotels or Mom,, I vape unflavored (i call it "Neat"),, in the hotel I make sure to blow away from any smoke detector type gadgets. My argument if anyone ever smelled anything would be its perfume,,, many "loud" perfumes out there.

 

[UncLeJunkLe]

I hope you go to your neighbors with wet hair!

"Can I borrow your hair dryer, I'm trying to get this decal off my [insert object here] but I think I need some heat."

 

[kross8]

I hope you go to your neighbors with wet hair!

Hahaha,, they are pretty used to seeing me with wet hair,, I am wash and run,,, my blow dryer does more work on my batteries than my head. The hair in my photo is wash and run with a good brushing

 

[UncLeJunkLe]

Well it's not the only reason. We also don't get along anymore.

I figured there was more to that story. But it was kinda funny to read that.

 

[fiddleshe]

"Can I borrow your hair dryer, I need to get this decal off my [insert object here] but I think I need some heat."

How about the truth? The truth always works. Just be prepared for blank stares.

 

[Slots]

I actually found coils for my ancient protank LOL.
but eventually age does catch up with the grommets and they disintegrate.

Here's the only two parts that disintegrate, or fall apart.
I really stocked up back in 2016, but (surprise, surprise) they still carry them

Resistance Coil Insulator 10 Pack RUBBER OR SILICONE (CE Type Atty's, eg. Protank, Evod,T3 etc.)

Kanger Protank / Evod Coil Head Assembly - Whole Unit or Parts

 

[fiddleshe]

I figured there was more to that story. But it was kinda funny to read that.

You gotta know her. She's an old ...

 

[UncLeJunkLe]

How about the truth? The truth always works. Just be prepared for blank stares.

Can I borrow your hair dryer? I need to rewrap my e-cigarette battery. It won't explode. If it does, I'll get you a new hair dryer after I get myself a new battery

 

[fiddleshe]

Here's the only two parts that disintegrate, or fall apart.
I really stocked up back in 1916, but (surprise, surprise) they still carry them

Resistance Coil Insulator 10 Pack RUBBER OR SILICONE (CE Type Atty's, eg. Protank, Evod,T3 etc.)

Kanger Protank / Evod Coil Head Assembly - Whole Unit or Parts

1916 LOL!!!!!!!

 

[NolaMel]

link?

. I’m glad this week is almost over, my brain is on vacation. Multitasking isn’t working for me tonight
https://www.amazon.com/Portable-Shrink-Tubings-Drying-Hand-Hold/dp/B071WLS26T

 

[fiddleshe]

. I’m glad this week is almost over, my brain is on vacation. Multitasking isn’t working for me tonight
https://www.amazon.com/Portable-Shrink-Tubings-Drying-Hand-Hold/dp/B071WLS26T

this is the one I have
1500 Watt Dual Temperature Heat Gun 572°/1112°

 

[UncLeJunkLe]

Here's the only two parts that disintegrate, or fall apart.
I really stocked up back in 1916, but (surprise, surprise) they still carry them

Resistance Coil Insulator 10 Pack RUBBER OR SILICONE (CE Type Atty's, eg. Protank, Evod,T3 etc.)

Kanger Protank / Evod Coil Head Assembly - Whole Unit or Parts

I wish I knew where to get these (other than lightning vapes) and other coil head parts without having to order 10K from manufacturers.

 

[fiddleshe]

I wish I knew where to get these (other than lightning vapes) and other coil head parts without having to order 10K from manufacturers.

What you don't need 10k?