Did what I usually do. Take it apart and reassemble. Back to normal.
Sent from my ONEPLUS 6T
Authentic Svoemesto Kayfun Prime
- Thread starter Bronze
- Start date
- th_trl_thread_readers 0
- Status
Sent from my ONEPLUS 6T
Well I created an account there and got 2 emails from them. An account confirmation and one saying I've earned 200 points. I didn't see any place to signup for their newsletter unless having an account gets me there - IDK.
Yes please, if you get one from them and can share it that would be awesome.
Thanks Bronze
If you take off the bottom plate, then push up on ring, it should go up until it hits a ridge on the base, it cant go any further and all primes should be the same. As long as the juice control on all are set to two full turns , they should all go up to that ridge. Not sure on the night prime or whatever that black one is, but it should also be the same. I bet that one is right and the other one that isn't going up as far is perhaps getting caught on that oring maybe?
Sent from my SM-G960U using Tapatalk
THANKS!!! Wife loved it.
Are you saying pushing up with the tank attached and opened two turns? Without the tank on if you push up and bottom plate off you would push the deck up and out correct? BTW all the Primes are built the same only difference is a gold plated deck and gold plated 510 screw.
I was saying to take the plate and ring off to see the ridge on the deck,(even with bottom edge of chimney)as the ring cannot be pushed up any further . With the ring pressed all the way downwards , towards the 510, as you look thru the af hole on the af ring, you see the af hole on the deck base and it's not completely centered, the ring actually covers up a tiny bit at the top, so that's something to check to see if all the primes in question are equal, now open AFC 2 turns, tank fully assembled and snap ring upwards (whether tank is on or off the ring cannot go upwards any further) now look thru ring hole and the actual af hole is not center once again, but this time the ring is covering a bit of the bottom (this amount should be checked with other primes in question) if they are similar in both positions, then perhaps the plate on one of the primes is not screwed in tight, so it appears that one is being pushed up more then the other.
Sent from my SM-G960U using Tapatalk
Prime's new companion is a Squid Ind. DB v3. It's 4mm taller than the JAC, pictured, and compact for a dual battery mod. Wattage only, super simple and built like a tank. Love my single 18650 mods but thought I'd pitch myself a curve for a change. Never owned a dual battery mod.
Should have put a Prime on the JAC for the photo (sigh). The simple design of the Squid caught my attention. Feels very comfy in hand. I wanted navy blue but those were gone. It should last me many many days at 14-18w. It's the only mod in use since coming in the mail yesterday. The battery indicator hasn't budged from full.
When I get my eternally bo'd K19 they should pair nicely together. Patience...meanwhile I visualize nKLF sitting on top!
Should have put a Prime on the JAC for the photo (sigh). The simple design of the Squid caught my attention. Feels very comfy in hand. I wanted navy blue but those were gone. It should last me many many days at 14-18w. It's the only mod in use since coming in the mail yesterday. The battery indicator hasn't budged from full.
When I get my eternally bo'd K19 they should pair nicely together. Patience...meanwhile I visualize nKLF sitting on top!
Thanks Bronze!
Side dish: He's back AND responded to me in that other k19 thread!
@Pinggolfer he responded, so
na na na-na na - you, gentleman of little faith.I really do want to see his modifications, dang it! I thought I was being nice (please someone tell me if I wasn't). I mean come on, all you guys must have read some of the threads at FT. I don't know about any of you but I do chuckle (being polite) when I read some of the modifications they do to get things working. I'm not knocking or slamming...it's just, aw crap NVM, I know you all have to know!!!
Bronze, you've been working your toilet so come on, if someone did all those things to a toilet you would be laughing your .... off AND you'd want to see pics. Maybe not IDK. I would.
So I figured it was about time to show you my Kayfun Prime. Mainly so @Pinggolfer doesn't think I'm simply visiting this thread to make poor jokes about his Kayfun habit, because I know all about having a shiny addiction and how it gets me in trouble.
Now before the good Doctor @kas122461 ventures his opinion, remember one Kayfun Prime is unique, I don't need two. One is not unlucky!
Now before the good Doctor @kas122461 ventures his opinion, remember one Kayfun Prime is unique, I don't need two. One is not unlucky!
So I figured it was about time to show you my Kayfun Prime. Mainly so @Pinggolfer doesn't think I'm simply visiting this thread to make poor jokes about his Kayfun habit, because I know all about having a shiny addiction and how it gets me in trouble.
Now before the good Doctor @kas122461 ventures his opinion, remember one Kayfun Prime is unique, I don't need two. One is not unlucky!
View attachment 816899
KAS
Sadly I can't view that vid in the UK. Must be super good, so I liked it anyway.
I don't understand why they block some of these clips like that.
It was meant as humor, Three Dog Night's "One is the loneliest number" KAS
I don't understand why they block some of these clips like that.
KAS
YouTube is just weird buddy. Thanks for explaining Bones!
Fortunately with all the other RTA's in this mess I call my office it's far from lonely.
That's sweet! Is that a gus lord?So I figured it was about time to show you my Kayfun Prime. Mainly so @Pinggolfer doesn't think I'm simply visiting this thread to make poor jokes about his Kayfun habit, because I know all about having a shiny addiction and how it gets me in trouble.
Now before the good Doctor @kas122461 ventures his opinion, remember one Kayfun Prime is unique, I don't need two. One is not unlucky!
View attachment 816899
Sent from my SM-G960U using Tapatalk
Thanks. It's the Gus Warrior of Light. But I do have the Lord too.
So I received my free upgraded nylon af screws today for the nkfl from svoemesto..they are twice as long as the original . I guess they are a good idea for when the build is a little light in the channels or cotton too close to deck. The only time I got a dribble from my 510 was when I went on vacation for 2 weeks and left my nkfl with juice in it, when I came back I noticed a little bubble inside the 510 hole...it was free, so I figured why not...ping y told me about them
Sent from my SM-G960U using Tapatalk
Sent from my SM-G960U using Tapatalk
- Status
