Authentic Svoemesto Kayfun Prime

[vapdivrr]

Funny. I was just thinking, "I wonder where Diver is?"

Usually with tapatalk, this thread is in my "participated " area , but it hasn't been there, so I kind of forgot

Sent from my SCH-I545 using Tapatalk

 

[Dikkind]

No leg lenghts are usually included to what everyone else gets....maybe your using SS wire, if so, it has a lower resistance. ....8 wraps of kanthal at 2.5 should be closer to 1.4 ish....you also could be using a 2mm rod instead of 2.5, or perhaps using 26g kanthal? If I had to guess, by your numbers, I would say your using 26g kanthal, because at 2.5 coil and 8 wraps, it would be around 1 ohm......if this is the case, I would drop a wrap or two, to get around .7 ohms, this way it would heat faster...if you really want 1.4 ohms, you need 28g. I mean 8 wraps of 26g could just be a little to much mass and lenght, but it should vape pretty good

Sent from my SCH-I545 using Tapatalk

Im positive its a 2.5 coil and its 2.8g wire. The package doesnt say if its SS or kanthal so maybe the guy gave me SS instead of kanthal like i asked for... busy vape shops..


Sent from my iPhone using Tapatalk

 

[Leo Bak]

Im positive its a 2.5 coil and its 2.8g wire. The package doesnt say if its SS or kanthal so maybe the guy gave me SS instead of kanthal like i asked for... busy vape shops..

Could be NI20: Coil wrapping | Steam Engine | free vaping calculators

 

[Dikkind]

this one ( 8 wraps ) giving me 0.7. Guessing its not kanthal then . Well sub ohming it is then.


Sent from my iPhone using Tapatalk

 

[Fredman1]

As an aside...
I hate it when they send me a little roll of rolled up wire included with a new device. They never say what wire it is... I mean what's the point of that

 

[Fredman1]

package doesnt say if its SS or kanthal

Only thing left is a magnet mate...

 

[vapdivrr]

Im positive its a 2.5 coil and its 2.8g wire. The package doesnt say if its SS or kanthal so maybe the guy gave me SS instead of kanthal like i asked for... busy vape shops..


Sent from my iPhone using Tapatalk

Could be....and fyi, it's 28 gauge, not 2.8 gauge. This gauge isn't even it's size in mm, for like 28g is something like
.33mm. So how is the 8 wrap, .7 ohm vaping?

Sent from my SCH-I545 using Tapatalk

 

[Dikkind]

Only thing left is a magnet mate...

Doesnt stick.. aarghh


Sent from my iPhone using Tapatalk

 

[Brewdawg1181]

this one ( 8 wraps ) giving me 0.7. Guessing its not kanthal then . Well sub ohming it is then.


Sent from my iPhone using Tapatalk

Nothing wrong with sub-ohming...at the right wattage. Doesn't make you a cloudbro. Not that there's anything wrong with that.
I'm an 8's man - 28 guage (ss), 8 wraps, around 8.x ohms, around 8 watts & change. 2.5mm ID- no 8's in that one.

 

[Dikkind]

Could be....and fyi, it's 28 gauge, not 2.8 gauge. This gauge isn't even it's size in mm, for like 28g is something like
.33mm. So how is the 8 wrap, .7 ohm vaping?

Sent from my SCH-I545 using Tapatalk

Its better but too hot for my taste. Again not a lot of flavor compared to the prefab nautilus 2 coils, which i find quite frustrating. Im sorry for all the questions. Thank u guys for your patience. Im heading back to the shop one of the coming days.


Sent from my iPhone using Tapatalk

 

[vapdivrr]

Could be a wicking issue perhaps if your not getting great flavor, as for the heat, a .7 ohm coil can run as cool as a 1.4 ohm coil if the wattage is adjusted accordingly. Now if your wicking is perhaps stuffed to much in the channels, or your juice flow is opened too much, or just too much cotton through coil, it will affect flavor more so then the coil itself...I guess go to the shop and see exactly what type of wire you do have and then take it from there. And no worries on asking to many questions, for that's what this is all about. It's all in the wicking my friend and it takes a bit of time perfecting

Sent from my SCH-I545 using Tapatalk

 

[Dikkind]

Something else. Svoemesto replied to my mail. And theyve sent me replacements for the scratched metal parts and the broken glass tank. (all damaged during transport). Great service I must say.

 

[dark_hawk]

I have two questions for anyone who have the Authentic KFP:
What are the sizes of the 3 o-rings on the base? ( You can measure the ones in the spare o-rings bag )
With the airflow ring down, If you block the air slot with your finger and blow or suck , does air escape through the seem between the airflow ring and the tank or is it air tight? Now if you push the airflow ring up to adjust it and try again, is air tight?

 

[Dikkind]

I have two questions for anyone who have the Authentic KFP:
What are the sizes of the 3 o-rings on the base? ( You can measure the ones in the spare o-rings bag )
With the airflow ring down, If you block the air slot with your finger and blow or suck , does air escape through the seem between the airflow ring and the tank or is it air tight? Now if you push the airflow ring up to adjust it and try again, is air tight?

When the airflow ring is down it feels pretty much air tight. When lifted up to change airflow it's not air tight at all.

 

[Dikkind]

I have two questions for anyone who have the Authentic KFP:
What are the sizes of the 3 o-rings on the base? ( You can measure the ones in the spare o-rings bag )
With the airflow ring down, If you block the air slot with your finger and blow or suck , does air escape through the seem between the airflow ring and the tank or is it air tight? Now if you push the airflow ring up to adjust it and try again, is air tight?

When the airflow ring is down it feels pretty much air tight. When lifted up to change airflow it's not air tight at all.

 

[AstroTurf]

Mines loosey goosey

 

[dark_hawk]

Mines loosey goosey

Thanks for the reply AstroTurf.

Just to confirm, You have an authentic KFP and it is not air tight when air flow ring is down while blocking the air slot?
Air seems to be entering from here?

 

[AstroTurf]

Thanks for the reply AstroTurf.

Just to confirm, You have an authentic KFP and it is not air tight when air flow ring is down while blocking the air slot?
Air seems to be entering from here?

Yes

 

[Bronze]

I have and authentic KFP. With AFC locked and secured and my thumb blocking the exterior air flow hole I can still draw air...albeit very little.

 

[Bronze]

For anyone interested, JAC Vapour has a 25% discount on the Series B DNA 75W. Today only. Go to the product description and click on the USA link if you're ordering from the USA. I believe you get free shipping too. I did.

SERIES-B 75W DNA Mod | JAC Vapour