- Status
throjh" data-source="post: 3820799" class="bbCodeBlock bbCodeBlock--expandable bbCodeBlock--quote js-expandWatch">Gotcha. Too lazy for that thoughCould you take a side by side pic of a stock silicone seal and one where you cut it? I don't wanna over do it. Lol
Here you go.
Cut along the Dotted Line.
When you get a cup seal cut into a /\ it is still no good if it is not alligned right. I think you wil notice that the Small Fill Holes are at Right Angles to the Coil/Wick when the cup seal slots are lined up with the cup slots.
You can use this for a visual refence when putting a cup seal back in a Metal CE2.
Maybe they will just change the cut out of the silicone washer Zoid ;-)
I keep mine on a mod that stands in an upright position, I pull both silicone washer and lift both wicks up so they are a bit higher than the wick in the cup, it kind of makes a slight half round loop on either side of the cup. this seems to let the liquid loop up the wick and back down to the bridge and gives me a super vape with these cartos.
I would like to see the silicon washer part of the tip instead so this way it would stop anything coming up through the tip and that's it. free juice hitting the wicks around the cup, then you just adjust your wicks how you want them.
I keep mine on a mod that stands in an upright position, I pull both silicone washer and lift both wicks up so they are a bit higher than the wick in the cup, it kind of makes a slight half round loop on either side of the cup. this seems to let the liquid loop up the wick and back down to the bridge and gives me a super vape with these cartos.
I would like to see the silicon washer part of the tip instead so this way it would stop anything coming up through the tip and that's it. free juice hitting the wicks around the cup, then you just adjust your wicks how you want them.
Last edited:
And maybe I will win the Lottery.
I think if they haven't done it in over a year, they probably won't.
Dude. I win the Lottery and there will be 18k Provari's and Cartos for life for many people. That and Cheetos Puffs by the truck load.
Being Broke Sucks.
The difference can be like Night and Day.
Glad to here that this simple mod worked for you.
BTW - If you can, Hit the "Like" next to the post. Bad said if I get 1,500 Likes he will make it Sticky and I get a Free gotvapes Baseball Cap.
BTW2 - Once you get a cup seal with the Perfect /\ in it, don't throw it out when the carto dies.
One of my best cup seals has been used in Dozens of cartos. It cam from a Rev"2" carto. Back then, they didn't have Any slots in them what so ever.
Bad is so mean
Bad is a good man.
He first said 2,000 Likes and a gotvapes T-Shirt. Size XS.
But then he saw that it was a CAD Drawing so he made it 1,500 and the Cap.
CAD good Bad bad ....I'm tellin' ya pure
LOL
I'm not say'n that Bad's favorite color isn't Black, but all and all, he's not a Bad Egg.
1500 likes should get you your pick of anything off the shelf.
I think I will try to renegotiate our agreement. Maybe I’ll bring it up when I reach the 1,000 Like mark.
Only 997 to go !
Bad's a sweetie
We know. We just don't want Bad to get all Soft and Mushy hearing that we all like him.
I just snipped off the lip of the mouthpieces that come insterted into the fluxo's, and used that in place of the silicone cup. Good tight (but not bursting out) fit.
So far so good. I think this is it :3 No problems wicking or leaking. !!!
Though some of the posts on the fluxos don't touch my batt posts and it's getting tiresome adjusting batt posts over and over. Any way I can lower the fluxo post?
So far so good. I think this is it :3 No problems wicking or leaking. !!!
Though some of the posts on the fluxos don't touch my batt posts and it's getting tiresome adjusting batt posts over and over. Any way I can lower the fluxo post?
- Status
