Check out my Nano "dragon" Coil build

[Sickkboy]

100 pages at least, I believe. After they see what this mystery creature can done.

 

[dice57]

Really surprised this thread is only 7 pages .....

K, I'm thinking that I don't want you on my black jack table, Sir you can't hit a hard 21, it's against the law, sit, are you sure you want to double down on a hard 19? OK, sorry sir you busted. Thankfully I usually deal craps, and don't have to worry about counting abilities of others. no 1+8+10=18 it's a soft 28 not a soft 18 yeah it happens. lmao

 

[piggy]

K, I'm thinking that I don't want you on my black jack table, Sir you can't hit a hard 21, it's against the law, sit, are you sure you want to double down on a hard 19? OK, sorry sir you busted. Thankfully I usually deal craps, and don't have to worry about counting abilities of others. no 1+8+10=18 it's a soft 28 not a soft 18 yeah it happens. lmao

In our parallel universe the rules are different 10+10+11+11=21. That should explain everything.

 

[dice57]

In our parallel universe the rules are different 10+10+11+11=21. That should explain everything.

No sir sorry, you busted again, that's a hard 22 or a soft 32 or soft 42, either way your busted. I win, you, well place your bet sir, you're holding up the game. Sir the ace is a 1 or an 11, "oh supervisor" raise hand, motion signal that player may need to be cut off.

 

[iTEO]

should have Split it

 

[bmarley5780]

oh! forgot I have my settings at 40 posts per page....woops

 

[Ranic85]

Okay so I made a dual nano coil on my Nimbus. It produces a lot of vapor. Just not anywhere near what you guys are producing. Really makes me sad.

 

[patrao_n]

Yeah I couldn't get it to work at all with my nimbus. Could you take a pic so I can somewhat see. On mine it seems like I had to pack a ton of cotton in. Because my coil would have to be really high to reach the holes.

Sent from my SPH-L900 using Tapatalk 4

 

[iTEO]

Okay so I made a dual nano coil on my Nimbus. It produces a lot of vapor. Just not anywhere near what you guys are producing. Really makes me sad.

Trident dual dragon coil

Yeah I couldn't get it to work at all with my nimbus. Could you take a pic so I can somewhat see. On mine it seems like I had to pack a ton of cotton in. Because my coil would have to be really high to reach the holes.

Sent from my SPH-L900 using Tapatalk 4

Nimbus single dragon coil

 

[justguth]

I just want to know how your cotton is set up,
and what type your using. Are you just stuffing it under the coil? It looks like cotton balls to me......

 

[iTEO]

I just want to know how your cotton is set up,
and what type your using. Are you just stuffing it under the coil? It looks like cotton balls to me......

No, I don't just stuff it. It seems like bedding is the hardest part for most... I'll do a more thorough guide.
Here's my nimbus...

 

[Ranic85]

Trident dual dragon coil

Thanks iTEO, I didn't make my legs nearly that long, I had them almost right up against the post. I will try again and move the coils closer to the air holes. Also I drilled out 1/8th sized air holes a few days ago. I hope I didn't go too big.

 

[Big Screen D]

Late to the party, but in the game lol.

Put this thread up a few days ago. I think it's a pretty good tutorial on how to put this dragon coil in a ProTank head.

http://www.e-cigarette-forum.com/fo...-micro-coil-build-aro-evod-protank-heads.html

 

[DDN79]

First attempt at a Dragon Coil. Had a small strand of triple twisted 28g wire laying around from past builds. I think I am going with a single strand next time because if any part of the coil was too exposed, I would get a hot spot.

 

[crazyarms]

Double post. Sorry!

 

[crazyarms]

Built my first micro 2 days ago so I thought I'd give this a shot lol. Came out amazing. Used 28g kanthal 7 or 8 wraps on a jumbo paperclip. Used a single piece of cotton and wrapped up the coils. Vapor production is crazy. Goes through juice like a fiend though. Not a very good picture because it's all covered but it's a beast!



Sent from my HTC One now Free

 

[patrao_n]

Now I know why. I have a nimbus2. Which has the holes much higher than a regular nimbus. I will have to try this on my igo l. With my nimbus 2 I get really hot legs because rhey have to be so high. Causing a nasty burnt taste. Lol. Thanks for the thread though. I will try this again when I get more wire in.

Sent from my SPH-L900 using Tapatalk 4

 

[dice57]

wrap your legs with cotton, that's keep them from overheating, also will produce more vape.

 

[xyanide]

If your 'microcoil' is wrapped correctly (i.e. tight enough) you should have no issues with hot legs. I found that this seems to apply to any diameter.

 

[patrao_n]

I had a very tightly wrapped coil. I have been doing micro coils for a while now. Decided to try nano. Used a sewing pin. The legs were about an inch long. As soon as it fired the legs light up red. The first time I tried it they werent long enough to reach the airhole. But no hot legs.

Sent from my SPH-L900 using Tapatalk 4