I'm sure they work great initially (probably even better than normal Edition1 carto's) but the burning of the material when dry and the fact that they eventually get clogged up and hard to drag is why these CE2 carto's have huge potential.
E2 Cartomizer Technical Discussion
- Thread starter zoiDman
- Start date
- th_trl_thread_readers 0
- Status
I'm sure they work great initially (probably even better than normal Edition1 carto's) but the burning of the material when dry and the fact that they eventually get clogged up and hard to drag is why these CE2 carto's have huge potential.
The filler isn't in contact with the atty. They don't burn. When they're low, you get "burnt atty" taste, not "burnt filler" taste.
They can probably be soaked out with PGA like normal atties, carts, and cartos. May take a bit longer to dry, but since they don't burn, they should be much more resilient.
Honestly, from my experience... I'm sure it's possible to get these CE2's working great, but the point of them is to be something you vape, not something you mess with. I have spent way more time messing with CE2's than vaping them (if they'll even vape at all, which some of them apparently don't due to threading and other issues).
The consistency just isn't there, and it's SO not there that I'm not ever going to give this company a penny of my money. Just my .02.
They can probably be soaked out with PGA like normal atties, carts, and cartos. May take a bit longer to dry, but since they don't burn, they should be much more resilient.
Honestly, from my experience... I'm sure it's possible to get these CE2's working great, but the point of them is to be something you vape, not something you mess with. I have spent way more time messing with CE2's than vaping them (if they'll even vape at all, which some of them apparently don't due to threading and other issues).
The consistency just isn't there, and it's SO not there that I'm not ever going to give this company a penny of my money. Just my .02.
Ms.Nomad.... see my 'review' here:
http://www.e-cigarette-forum.com/fo...tem-808-dpv9-smoke51-etc-240.html#post1840914
Just tried one out and am a bit confused. It's working better by filling along the sides rather than the center 'sealed' hole. Amazing vapor for a 2.8Ω carto and I'm going to have to open one up soon to find out if it's an E2 type or what? I didn't see the diagram. Cignot has a diagram of the mega eGo carto and Vicky's blurb says it's similar, but I'm beginning to wonder if that's the case. Vapes much better with an 'outside fill' rather than a center fill. If you mean another diagram than the mega eGo one post a link.
I see. I don't understand how the juice enters the atty if there is no filler or wick transporting the juice. I guess it uses gravity or suction, but either way I'll stick with these CE2 carto's for now since they are coming along nicely. If RS goes bust I'll check out those Joye ones 
Huh, interesting.
I am referring to the eGo Mega diagram. When I was using them, they vaped quite well. They taste closer to an atty than a carto to me, and I get lots of vapor. Ongoing reports from the friend who let me play with them tell me they're still vaping well.
I'll have to mention to him what you said about dripping down the sides.
I've had good luck with the mega eGo cartos - I still have the original one I got in service from May 23rd, although recently it is acting a bit thin. I may autopsy that one with the new joye carto although that one is now vaping really well for me by the 'side filling. Actually I just took out the middle cap and am filling it along the side without replacing it now.
That's pretty good. If you do autopsy the eGo carto, let me know if you think it could feasibly be washed and made to perform well again.
I know Scottbee cleaned one up after he cut it - no apparent burning. I haven't cleaned the one I have, but I'm using the same ejuice flavor that I did when I started it. I actually prefer the mega eGo atty/cart combo - same volume (2.5ml) as the mega eGo carto, and easier to fill. Also like the cone/atty for looks but the 1.5ml capacity isn't 'four hours' of vaping like the mega cylinder style.
This is an aside...
I'm an atomizer bigot almost. I hate the 808 cartos (and all cartos I've tried), and quite frankly am giving them away (already claimed). Also with the development problems of the EC2's (or whatever they are called) I've stayed away.
However.
I was pleasantly surprised by the eGomega cartos, and now with these new 510 cartos I just picked up from Cignot. It's as good as a 510 atty, more consistent, tastes great, last a lot longer than a cart, but the filling is a pain.
Just emptied my first 510 carto, and refilled with .75ml and it's fogging up the room on an ego battery. Took my first five (ordered 15) and filled them with my favorites. Now I'm sport vaping to see how long it will last.
To be quite honest, this is better than a cartridge/atomizer experience. Not enough to make me pif my atties- but enough to make me more open minded and actually use these.
I'f also found that is you happen to over fill these you can insert the syringe and suck out the overfill. Which is quite nice.
I'm impressed thus far. I'll beat the hell out of them for two weeks and post a review.
Here is my first review of the e2 ceramic R3 .
I'll add a detailed video tomorrow of the cup and whatever leaking issues they have and and other things like close up of refilling and dry burning of the ceramic version.
I'll add a detailed video tomorrow of the cup and whatever leaking issues they have and and other things like close up of refilling and dry burning of the ceramic version.
Last edited:
E2 cartomizer Update on the issues that users are experiencing.
Last edited:
bad,
Since you're talking to these guys, you think they'd consider going back to the plastic filler ring? It would be much easier to pull/reinsert for refilling/cleaning. They could just size it to make it a press fit, while keeping the middle silicone ring and mouthpiece to help hold it all in place. I've pulled mine I don't know how many times on the older 510's and I'm not getting any leaks from them.
Since you're talking to these guys, you think they'd consider going back to the plastic filler ring? It would be much easier to pull/reinsert for refilling/cleaning. They could just size it to make it a press fit, while keeping the middle silicone ring and mouthpiece to help hold it all in place. I've pulled mine I don't know how many times on the older 510's and I'm not getting any leaks from them.
When you looked into the one on the Hello bat you said you had "widened the hole". How? Why? and how much difference does it make? What about the other two you were vaping on?
The ego super cartomizer has it's own thread, it's starting to get confusing with too many q&a about this other entirely different carto.
There is a thread very near to this one, for the ego carto:
http://www.e-cigarette-forum.com/fo...tomizer-suddenly-hard-draw-5.html#post1659842
There is a thread very near to this one, for the ego carto:
http://www.e-cigarette-forum.com/fo...tomizer-suddenly-hard-draw-5.html#post1659842
Hi Guys,
Does anybody know of any supplier here in the US that has the 510 CE2 XL in 3.0 ohm to 3.2 ohm yet or has some on order.. Thanks!! Also thanks to all the peps on this thread for working so hard to give us the best possible vaping experience to date. Badkolo do you ever sleep?? Great Vids!! Rock on buddie..
Does anybody know of any supplier here in the US that has the 510 CE2 XL in 3.0 ohm to 3.2 ohm yet or has some on order.. Thanks!! Also thanks to all the peps on this thread for working so hard to give us the best possible vaping experience to date. Badkolo do you ever sleep?? Great Vids!! Rock on buddie..
I have the worst case of insomnia known to man. thanks buddy.
I dont think anyone has the 3.0 to 3.2 yet, those where just made available this week form what i know so expect vendors to recieve those in a week or so i would take it.
I dont think anyone has the 3.0 to 3.2 yet, those where just made available this week form what i know so expect vendors to recieve those in a week or so i would take it.
quick1:: on one of them, i cut out the hole of the center plug and widened it, i lik the way it performs with a wider airflow hole in the refill plug.
The other one had the inner plug and i showed that in the video for one of them. Ill make some more detailed videos as well later today.
The other one had the inner plug and i showed that in the video for one of them. Ill make some more detailed videos as well later today.
Last edited:
- Status
Similar threads
- Locked
- Locked
