E2 Cartomizer Technical Discussion
- Thread starter zoiDman
- Start date
- th_trl_thread_readers 0
- Status
Hey, do you guys (and gals) have any excessive condensation problem with the E2?
No, I havent. I get a small amount of condensation with the 808s, almost none at all with the 510s
Whereabouts? I get a little trace of liquid on my battery connector when I change or refill cartos, but it's usually not enough to worry about.
ooops, didnt make it clear 
...between the mouthpiece/driptip and the middle/filler ring. I get quite abit of liquid in there after about 10 drags. I have to dry it off or I get the juice in my mouth..lol. Maybe it has to do with our weather here.
...between the mouthpiece/driptip and the middle/filler ring. I get quite abit of liquid in there after about 10 drags. I have to dry it off or I get the juice in my mouth..lol. Maybe it has to do with our weather here.
Yep, especially if I use a tip that creates a larger volume inside the tube. I've mentioned it a time or two in this thread, but I doubt if anyone remembers it.
ooops, didnt make it clear
I vape most of the time with the battery pointed down somewhat. Most of the condensation drips back down in the cup and is vaped again on the next draw. An excessive amount can get into the inlet and seep out at the battery connection. For a while, I thought it was a minor leak in the cartridge.
Edit - I forgot to mention. I think the condensation is mostly VG because the taste is sweet, with no nicotine.
Last edited:
With the size of this thread. I would have read it but with so much info here, it could have gotten lost in some corner of my brains..LOL
edit: i vaped mine in an almost horizontal position as all my E2 are at the lower ohm range.Have an order in the 3 -3.2 range coming. Even the 2.6 - 2.8 doen't really wick fast enough !
Last edited:
I was gone most of last night; partying this time 'bad'...lol... I tried to read the threads I missed when I got in late but only remember john's dark juice issue. Never had that and noticed 'bad' did some tests too. I did get that w/ old cartos when they got old, so it must be gunk turning it dark.
No real problems w/ condensation 'william' although I have to dab the rings dry when refilling. Nothing that juices me unless I overfill and I haven't done that in a while.
BTW, the Vgo did real well on it's first night out, so did the 808XL r4.
No real problems w/ condensation 'william' although I have to dab the rings dry when refilling. Nothing that juices me unless I overfill and I haven't done that in a while.
BTW, the Vgo did real well on it's first night out, so did the 808XL r4.
I'm non-violent except when it comes to imminent bodily harm, so I left him instead.
Cute joke! Thanks!
Last edited:
I remember because you mentioned what I thought was leaking around the filler ring could be condensation. Just don't ask me what I had for breakfast, though...
So, you're the one! It didn't take me long to forget who. I talked to bad about it later on, but it just went through one ear and out the other.
Ok so it looks like my newest R4's are in new york and ill have them in the morning, thats was fast.
These are my returns and they handled it. a few packs will be sent to 2 members that had issues cause i care about my fellow vapors.
These are my returns and they handled it. a few packs will be sent to 2 members that had issues cause i care about my fellow vapors.
No e-Mail yet but I'm sure when it arrives, it will be the good news I have been waiting for. Your a good man Bad. I think without your help this entire E2 thing would have fallen flat on it's face.
if its a higher ohm e2. like 2.9 to 3.1, then fluff the wick in the slits, they get cramped in there.
if its a lower ohm e2, add ptb dynasty.
but either way the ptb makes it better no matteer what, the e2 can be wicking very well and still the ptb mod will make it that much better.
- Status
Similar threads
- Locked
- Locked
