The costs of running this huge site are paid for by ads. Please consider registering and becoming a Supporting Member for an ad-free experience. Thanks, ECF team.

Eleaf iStick "pico"

Discussion in 'Temperature Control' started by USMCotaku, Mar 21, 2016.

Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. fgarvin

    fgarvin Full Member

    Apr 25, 2015
    Press the Fire button 4 times in quick succession to enter the wattage settings menu. Press Up or Down to increase or decrease the wattage. hth
     
    • Useful Useful x 3
  2. Winblows

    Winblows Super Member ECF Veteran

    Supporting member
    Feb 10, 2017
    Copenhagen (UTC+1)
    Thanks! Yes it works :)
    ... but only the first 3-5 MTL draws. After that the Pico switches back to wattage control and ignores the "4 times in quick succession" until the coil cools down to room temperature :(
     
  3. Coastal Cowboy

    Coastal Cowboy This aggression will not stand, man! Verified Member ECF Veteran

    Supporting member
    Jun 13, 2013
    Alabama Gulf Coast
    Arctic Fox firmware addresses this. Why Joyetech (parent of the chipset in Eleaf mods) hasn't addressed it yet astonishes me.

    Arctic Fox is not "easy peasy" to set up, but once it is, the degree of customization is up there with much more expensive mods.

    NFE Team
     
    • Useful Useful x 1
    • Optimistic Optimistic x 1
  4. sofarsogood

    sofarsogood Vaping Master ECF Veteran

    Oct 12, 2014
    if the mod detects that the resistance of the coil is above the limit I believe it switches to watts mode. I believe most TC modes are set up to do this, probably a safety feature. Make sure your build is stable and starting resistance is below 1.5 ohm.
     
    • Useful Useful x 2
  5. Winblows

    Winblows Super Member ECF Veteran

    Supporting member
    Feb 10, 2017
    Copenhagen (UTC+1)
    The coil is SS 316, 0.25ohm (locked) in a Kayfun v5
     
    • Like Like x 1
  6. TrollDragon

    TrollDragon Vaping Master ECF Veteran

    Dec 3, 2014
    NS, Canada
    If the resistance of the coil doesn't climb fast enough, the Pico will kick you back to wattage mode instead of giving you a TCR error, like it does with the ArcticFox firmware.

    Check for loose post screws/cut lead and a loose 510 screw.
     
    • Useful Useful x 3
  7. gerrymi

    gerrymi Ultra Member ECF Veteran

    Supporting member
    Jul 12, 2013
    The 'Burgh, PA.
    Eleaf Istick Pico Dual + 120mL Fuggin Juice $19.87

    You can pick up a Eleaf Istick Pico Dual mod + 120mL bottle of Fugginvapor e-liquid for just $19.87!

    • Dimensions: 2-15/16″ x 1-13/16″ x 1-11/16″
    • 510 Threaded
    • Comfortably Fits 25mm and Smaller Tanks
    • Operating Wattage: 1 – 200 W
    • Temperature Control: Nickel 200 (Ni200), Titanium (Ti), Stainless Steel 316 (SS316), TCR Modes
    • Temperature Control: 100 – 315C / 200 – 600 F
    • Bypass (Direct Output Voltage) Mode
    • Resistance: 0.1 – 3.5 ohm in Variable Wattage/Bypass Mode
    • Resistance: 0.05 – 1.5 ohm in Temperature Control mode
    • OLED Display Screen
    • Preheat Functionality
    • New Power Bank Feature
    • Includes Reverse Charging (RC) Adapter for Rechargable USB Devices
    • Ventilation Holes for Improved Heat Dissipation
    • Hidden Adjustment Buttons located on the Bottom of the Device
    • Firmware Upgradeable
    • New Balanced Trickle Charge System
    • Requires (2) High Amp 18650 Batteries (Sold separately)
    • Micro USB Charging Port (Micro USB Cable included)
    • *External charger recommended for faster charging speeds*
    • Dual Circuit Protection
    • Reverse Polarity Protection

    • ..
     
    • Like Like x 2
    • Winner Winner x 2
    • Informative Informative x 1

Share This Page