Eleaf Lemo II

[Treeburner1983]

My fiancee was just asking me last night what she could get me as a gift (no it's not my birthday, I've just got a good woman), and fortunately today I noticed the Lemo 2 was available at MVS so I sent her a quick text and she ordered me one! After reading through this thread I'm convinced I'll like the Lemo 2 as much or more than my regular Lemos (2 regular, 1 drop) so I ordered one for myself too. Few minutes later they were out of stock, so I got my order in just in time!

Looking forward to trying this out both with kanthal and with nickel when I finally get my ipv4 and vaporflask clones.

anyone out there got a Lemo 2 and a Goblin? If so, please compare airflow and vapor production.

The Lemo 2 is designed for single coil, the Goblin for dual - not really a fair comparison since the Goblin has two airholes in the deck and double the coils.

-Treeburner

 

[Ghost13]

Im using the M1.6x3 and they work great not only for the Lemo but for my Kayfun V4's!

 

[Sgt.Rock]

Im using the M1.6x3 and they work great not only for the Lemo but for my Kayfun V4's!

Ok, Thanks!

 

[Jimi D.]

This is a very nice tank. I like the heavier weight of SS compared to the original Lemo.

I disassembled the device, o-rings and all. I boiled in distilled water for 30 minutes.

My build is with 3 strands of silica with a 5/4 wrap of 0.7 mm ribbon kanthal. I made sure that the silica was packed,so I wouldn't have any juice filling up the barrel.

She vapes beautifully. Flavor is superb. Probably due to my build. Spaced ribbon with 3 strands of silica is a big flavor producer. Building this tank is a cinch. I've had zero problems with filling. No leaks, no dry hits. The vapor is consistent. Hit after hit. I truly believe this tank is going to be #1 this year. Do get one.

 

[RedheadedBStarD]

This is a very nice tank. I like the heavier weight of SS compared to the original Lemo.

I disassembled the device, o-rings and all. I boiled in distilled water for 30 minutes.

My build is with 3 strands of silica with a 5/4 wrap of 0.7 mm ribbon kanthal. I made sure that the silica was packed,so I wouldn't have any juice filling up the barrel.

She vapes beautifully. Flavor is superb. Probably due to my build. Spaced ribbon with 3 strands of silica is a big flavor producer. Building this tank is a cinch. I've had zero problems with filling. No leaks, no dry hits. The vapor is consistent. Hit after hit. I truly believe this tank is going to be #1 this year. Do get one.

Private video Jimi D.

 

[Jimi D.]

Private video Jimi D.

Oh no ! Not again ! I'll fix it thanks.

 

[MidwestGuy]

I'm pushing two weeks with mine ... absolute best tank I've ever owned (aside from the massive drip tips, which I've replaced with the drip tips from my original Lemos) No complaints. I was worried about not being able to make solid connections with the floating positive center pin, that has been a complete non-issue. Love being able to trim the airflow on the fly, and I can't count how many times I've used the top fill, so convenient. No leaking, excellent flavor, excellent airflow, love the build deck ... they've been fantastic!

 

[Sgt.Rock]

Nice vid Jimi,

Gave ya a thumbs up but it wouldn't let me comment..

I agree--this is one Out-Frikkin-Standing device.

.5 ohm 3 mm coil 24 ga NiChrome with a cotton wick on a Stingray X @32 watts or there abouts.

...no dry hits, no flooding or gurgles, no leaking even laying it on it's side, great vapor and easy to fill after I added a drop of vg to the slidey parts.

Airflow adjustment is solid and even at the low end it chucks out the plumes of vapor.

Emptying to change wick or whatever is simple--syringe in hole..suck it dry and disassemble. Haven't lost as much as a drop yet

I need a few more of these tanks for sure!

Vape on!

 

[Jimi D.]

Nice vid Jimi,

Gave ya a thumbs up but it wouldn't let me comment..

I agree--this is one Out-Frikkin-Standing device.

.5 ohm 3 mm coil 24 ga NiChrome with a cotton wick on a Stingray X @32 watts or there abouts.

...no dry hits, no flooding or gurgles, no leaking even laying it on it's side, great vapor and easy to fill after I added a drop of vg to the slidey parts.

Airflow adjustment is solid and even at the low end it chucks out the plumes of vapor.

Emptying to change wick or whatever is simple--syringe in hole..suck it dry and disassemble. Haven't lost as much as a drop yet

I need a few more of these tanks for sure!

Vape on!

Thanks Sgt I'm still tickled how I'm getting thick plumes from 1.4 ohm at 21 watts. My juice is 35/55/10 pg vg water too ! I'm taking this setup to work with me tomorrow

 

[Sgt.Rock]

Yeah man.. I'm fogging up my living room now with 45/55 PG/VG ..wonder what it would do with 30/70..?

Might be trouble though if my wife can't see the TV though...LOL I'll save that for tomorrow in my office

 

[BluesPower]

I agree--this is one Out-Frikkin-Standing device.

.5 ohm 3 mm coil 24 ga NiChrome with a cotton wick on a Stingray X @32 watts or there abouts.

...no dry hits, no flooding or gurgles, no leaking even laying it on it's side, great vapor and easy to fill after I added a drop of vg to the slidey parts.

Airflow adjustment is solid and even at the low end it chucks out the plumes of vapor.

Emptying to change wick or whatever is simple--syringe in hole..suck it dry and disassemble. Haven't lost as much as a drop yet

I need a few more of these tanks for sure!

Vape on!

What he said

I've only been vaping 3-4 months, so other than my journey to get here (V2s, eGOs, etc) I don't have the experiences many of you have. I have been completely happy with both my Drop and the Lemo2 (both of mine were spotlessly clean when I got them and neither of them have leaked, gurgled, or done anything to me that was disappointing). I'm looking forward to perfecting my coil building and wicking skills. I absolutely love the AFC and top fill of the Lemo2. I don't know if they will incorporate those features into a Drop2 at some point in time, but if they do, I'll have one in a heartbeat.

 

[Syfi]

I concur with everyone's comments. Just received mine today and she is just out-fricking-standing. So far she's working great. Luv the easy top fill and the adjustable air flow ring. They are both tight enough to stay where you put them and feel very precisioned. No more having to remove to fill or adjust AFC. No more drips out of the tip as you fill it. No more bottom compartment leaks. Much larger diameter opening tip then on the Lemo. So far she vapes just as great as the Lemo. Really loving all the upgrades. My one and only wish is that they make a 5ml tank like the Lemo!

 

[Sgt.Rock]

+1 on the 5 ML tank option as well!

Although it is very easy to "top off" it would be nice to have the larger tank.

 

[Btsmokincat]

+1 on the 5 ML tank option as well!

Although it is very easy to "top off" it would be nice to have the larger tank.

Offer a taller glass/chimney and call it...

The Stretch Lemo! [emoji13]

 

[Sgt.Rock]

Offer a taller glass/chimney and call it...

The Stretch Lemo! [emoji13]

LMAO...+100 for that one

 

[Claviger]

Ordered two of them.

Anyone have any issues with insulators and high power builds, talking like 5 wraps of 24 or 22 gauge.

 

[Sgt.Rock]

Manual says good to .3 ohm...

PEEK insulator should handle most builds I would think

 

[illitirit]

got one today from eciggity. I will reserve judgment on the tank performance until a later date. But as for right now it is covered in machine oil. Its so bad that my first build / tank made me gag, wanted to throw up afterwards. This was after already washing in hot soapy water.

Its soaking in 99% iso right now after I boiled it in soap water for like an hour. I might even try acetone if i still taste machine oil.

 

[roflwaffles]

Got my Lemo 2 from eciggity today. Very impressed. No leaking like my Lemo 1, except when I overfilled it. Flavor is on par if not better than the Lemo 1 for me and the AFC ring is so much better.

Using a dropper bottle tip to fill it is a bit hard though and the drip tip sucks.

 

[Sgt.Rock]

Hey waffles, I've been using a syringe for filling/emptying and it works like a champ. Maybe a needle tip bottle if you don't have syringes?