- Status
Anit Leak Filter, to prevent the vortex against leaks we had a Filter Sheet which is paper thin wrapped around the cup at the base, It does not affect taste or wicking action & This Helps a few things. It completely stops any juice from escaping and going into the tube , this wasnt a big issue in the first place but once in a blue it did happen and this stops it, The other purpose is to prevent any leaks at the base, these tube are thick and are seated onto the base with plant cellulose so it is tight to the base but can be pride off with pressure eventually for when many will obviously want to dry burn it to extend its life but we stress these are disposable products and should be treated as such.
I use mine for 3 days and then i do a cleaning and dry burn and then after i used it up again I throw it away and pop a new one.
I use mine for 3 days and then i do a cleaning and dry burn and then after i used it up again I throw it away and pop a new one.
Fillerless...just a very thin liner there to assist more with any leaking issues that might occur, extra insurance. Personally i DID NOT have any leaking with these units when I beta-tested them but they were very very very careful with it and went an extra step on the final iteration...
From the pics it looks like it's been tea-bagged. Does the wrap have any affect on wicking?
firing up the battery with no juice on the atty coil. People use it to clean the "gunk" off and try to restore and prolong the use of there attys cartos fluxos ECT.....
dry burning is applying power to the coil after cleaning to burn the gunk off.
After cleaning and allowing the wick to dry, mount the disassembled carto on a manual battery and hit the button for a few seconds, repeat as necessary. I usually rinse the carto again after dry burning and allow to dry before using. HTH
After cleaning and allowing the wick to dry, mount the disassembled carto on a manual battery and hit the button for a few seconds, repeat as necessary. I usually rinse the carto again after dry burning and allow to dry before using. HTH
Powering the atty without any liquid. This burns off the build up that accumulates over time when vaping.
That might not be Websters version, if there is a Websters version but that's the general idea.
When you say you clean it after 3 days, how many refills is that for you? How many fills are you getting between cleanings?
Got my order in. Picked up some xl fluxomizers too and some accessories. (yea I know they're not version 5). These new Vortex look promising though I never really had any major issue with clearomizers. Now the wait lol...
I just checked the stock on these. they started with 1000 units and they're at 446 left now. assuming everyone ordered the max of 3 units, thats 185 orders so far in about 15 hours or so. man badkolo has some packing to do!
<<twiddling thumbs>> Oh, it's only been 5 minutes since I ordered - on a Sunday! LOL
for testing, 3 to 4 refills a day for 2 to 3 days. the issue with cleaning is you need to pryu the tube off and remove the anit leak filter, clean , dry burn and place the stem cup back in, this will work but we warn that the tube wont be on extra tight at that point and if it does leak you know why.
or toss my hands up in the air and say , I QUIT. lol
by the way clear style drip tips fit and work and i have had no leaks holding it upside down for 5 minutes.
so you can use a drip tip on the vortex
Last edited:
always good to know! I hope to get a week outta one since I burn 1/2 ml a day. by the way have you even slept yet?
To be quite honest with you I am happy with three days use. For two bucks a cartomizer that's 66 cents a day. I only cleaned a few times to test if you could actually do that with these but if I used these on a regular basis as my main vape (and I may just start doing that, I am that happy with them) I would be extremely pleased with 3 days and toss...no fuss...
- Status
Similar threads
- Locked
