GP Series by VapourArt - Official Thread for GP Spheroid, GP PAPS, X, GP Piccolo, GP SnP and more - Part 2

[jpcwon]

Also, there is no measurable conductivity increase on the silver plated M4. If anything it was done for less screw cleaning.....
and maybe a bit for the coolness factor . I am pretty sure there are a few here that understand the cool factor....right Bill? Woods? Strike? Arms everywhere crazy? Yankeefrobro? jrs? Z beast? JP? Ace? Todai? landman? others? even the King of Kings King P? others I have missed? Cmon' testify....Testify

note - I have intentionally left the ladies out, frankly because they are smarter

Cool factor understood my good sir!! *salutes*

And yes, the ladies are always smarter!! I've tried to outsmart my wife in the past....BAD idea!!

 

[Vapourz_411]

Hello All! Seems business as usual!
Sorry I missed your text this morning AceBro, I think you figured it out! btw, you don't need Blakes # , sit back and relax all is good .

Also, there is no measurable conductivity increase on the silver plated M4. If anything it was done for less screw cleaning.....
and maybe a bit for the coolness factor . I am pretty sure there are a few here that understand the cool factor....right xtreme101? Bill? Woods? Strike? Arms everywhere crazy? Yankeefrobro? jrs? Z beast? JP? Ace? Todai? landman? others? even the King of Kings King P? others I have missed? Cmon' testify....Testify

note - I have intentionally left the ladies out, frankly because they are smarter

Guilty as charged

 

[yankeebobo]

Cool factor understood my good sir!! *salutes*

And yes, the ladies are always smarter!! I've tried to outsmart my wife in the past....BAD idea!!

I've outsmarted my wife before.
Then I realized she was ready and outsmarted my outsmart.

 

[Vapourz_411]

.........Also, there is no measurable conductivity increase on the silver plated M4.

But my head disagrees even though the numbers don't show it, hmmm, I think that is the definition of delusional, oh well, my wife who is definitely smarter than I am has charged me with that too!! I guess that means I fit right in with y'all, lol!

 

[EmE247]

So the GPin in Lux upgrades the topcap. What about the bottom switch screw? Cant seem to find it.

 

[newyork13]

I'm getting ready to put a Sophia into my newly arrived SnP.
Do you replace both of the top two o-rings with the red ones or just use one red oring up top, or something else?

I use a byleo straight 20 tip to feed the sophia thru the SnP...works the best for me. Lube the SnP o-rings on both ends with your juice and turn the whole sophia while feeding thru and it slips thu like butter! Hugs Sophia nicely with NO LEAKS! I use a ½ ... micro coil with cotton and you are good to go!!

 

[sedge]

So are there any upgrades or optional parts or spare parts as backup I should get for the GP Paps X SS v1.5 or the Heron 1.5 that I just ordered?

 

[EmE247]

So are there any upgrades or optional parts or spare parts as backup I should get for the GP Paps X SS v1.5 or the Heron 1.5 that I just ordered?

U need the X converter to be able to use the Heron on that X.

 

[jpcwon]

So the GPin in Lux upgrades the topcap. What about the bottom switch screw? Cant seem to find it.

I am pretty sure that those will be available for tomorrow's Vapourday. The Paps X M4 screw is what you want (I think)....someone correct me if I am wrong...

 

[sparc]

Sending big time healing vibes out to your daughter!

thank you Cucco.

 

[BILLB OKC]

plus 1 on the kool factor!

 

[sedge]

U need the X converter to be able to use the Heron on that X.

I did order that.

 

[StrikeIII]

I am pretty sure that those will be available for tomorrow's Vapourday. The Paps X M4 screw is what you want (I think)....someone correct me if I am wrong...

Yup M4 is what you want.

Sent from my HTC One_M8 using Tapatalk

 

[StrikeIII]

Hello All! Seems business as usual!
Sorry I missed your text this morning AceBro, I think you figured it out! btw, you don't need Blakes # , sit back and relax all is good .

Also, there is no measurable conductivity increase on the silver plated M4. If anything it was done for less screw cleaning.....
and maybe a bit for the coolness factor . I am pretty sure there are a few here that understand the cool factor....right xtreme101? Bill? Woods? Strike? Arms everywhere crazy? Yankeefrobro? jrs? Z beast? JP? Ace? Todai? landman? others? even the King of Kings King P? others I have missed? Cmon' testify....Testify

note - I have intentionally left the ladies out, frankly because they are smarter

GUILTY! [emoji14]

Sent from my HTC One_M8 using Tapatalk

 

[Idaholandho]

I'm getting ready to put a Sophia into my newly arrived SnP.
Do you replace both of the top two o-rings with the red ones or just use one red oring up top, or something else?

I would personally replace both. D is able to get away with 1 red on top and bottom with Diver V2 and (V1 when she had one)

 

[Idaholandho]

GUILTY! [emoji14]

Sent from my HTC One_M8 using Tapatalk

BOOM! I have been known to take them apart for people to see the interior finish on the GP, so why not some Bling?

Mentioning long long ago, The inside finishes of GP are something to gawk at! In my old vape days when I actually owned other tubes I started to look at the inner finishes of the others. I remember having a couple tubes that were very well known that looked like a beaver chewed out for the battery placement

In fact, I think that is exactly described it before.
Some are new to the mechanical age and can not compare but, with the GP tubes, the thread tolerances and cleanliness is amazing, the inner tube finish is smooth and buttery soft and they shine.

 

[yankeebobo]

I'm getting ready to put a Sophia into my newly arrived SnP.
Do you replace both of the top two o-rings with the red ones or just use one red oring up top, or something else?

One red oring in top. Nothing in bottom.

 

[Ace Wop]

I got mine.....Placed 3 orders and got all 3 tracking#s....very impressive Blake!!

Blake is awesome


ACE-WOP

 

[Akdare]

Ok...so today I finally joined the X club...a LUX X at that. I already have 2 v2.5 PAPS, and a v3...

I'll be picking up a LUX X Converter, and a 510 adaptor tomorrow.

 

[Todai]

Hello All! Seems business as usual!
Sorry I missed your text this morning AceBro, I think you figured it out! btw, you don't need Blakes # , sit back and relax all is good .

Also, there is no measurable conductivity increase on the silver plated M4. If anything it was done for less screw cleaning.....
and maybe a bit for the coolness factor . I am pretty sure there are a few here that understand the cool factor....right xtreme101? Bill? Woods? Strike? Arms everywhere crazy? Yankeefrobro? jrs? Z beast? JP? Ace? Todai? landman? others? even the King of Kings King P? others I have missed? Cmon' testify....Testify

note - I have intentionally left the ladies out, frankly because they are smarter

ROFL! Ordered a Heron today, and would like to grab a Heron 510 adapter tomorrow from VA. I was debating whether I would connect it to my X using the X Converter Ring, or using the Heron 510 adapter to the 510 X top cap.

My brain answered me: "Whichever looks cooler".