Hybris VV Mod Owners Group

[IMRs]

Looking forward to hearing your review of what you think about it. I'm sure you will like it.

vape On
Burnie

I second that, for sure!

I quit using Protanks because of the tight draw, might have to try an AFC and see if that helps. But I have so much right now that Don't get used, no need to order more stuff, at least at the moment.

vape On
Burnie

These are most awesome!!! Try it, I know you'll like it.
You good peoples have a wonderful day (and holiday weekend). I have to scoot.

 

[Burnie]

Tried to make a wrap for it, not too good, and I also didn't like the feel of the material, so I took it off. Might try again sometime with different material. It is a PITA to match up the screen & buttons correctly.

Hybris (Wrapped) with 22mm IBTanked.

vape On
Burnie


Edit: Forgot to mention that the Hybris (my 3rd) I ordered Wednesday arrived today Really fast shipping and delivery.

 

[Burnie]

Was looking through my tanks and found this setup. Really like the thinner beauty ring, just don't know where to get them as I got this one in a lot of carto tanks I got in the classies.

Hybris with DCT Slim Tank

Vape On
Burnie

 

[sando7]

found another topper someone might like and it's reasonable
Vapor Range | Kangertech MOW Dual Coil Stainless Steel Tank - Attys Your Online Vape Store for Mechanical Mods , Rebuildable Dripper RBA's RDA's , and Juice

 

[Burnie]

found another topper someone might like and it's reasonable
Vapor Range | Kangertech MOW Dual Coil Stainless Steel Tank - Attys Your Online Vape Store for Mechanical Mods , Rebuildable Dripper RBA's RDA's , and Juice

Wish they had more info and pictures on it. What coils it takes, Ω of coils, where and cost of coils, etc. It might look nice, but more info would be needed before I drop $20 for one.

Vape On
Burnie

 

[Flowersoul]

Burnie, I have the MOW and am enjoying it! It takes the same coils as the Aerotank Mini, and the ACV on it is very smooth and easy to turn.

IT does come with a standard 1.5ohm, but ordered 2.0ohms and that is what I'm vaping now.! It's become one of my favorites. F/T has it for $16.43--it is authentic!

Just received my second one!

https://www.fasttech.com/p/1805708

https://www.fasttech.com/product/1727000

 

[sando7]

what the person above ^^^^^^^^^^^^^said, "kanger new updated dual coil"

here are some decent shots
Cheap Original Kanger Aerotank Mow for Kanger Aeroank Emow Kit Online with $10.79/Piece | DHgate

 

[Burnie]

Burnie, I have the MOW and am enjoying it! It takes the same coils as the Aerotank Mini, and the ACV on it is very smooth and easy to turn.

IT does come with a standard 1.5ohm, but ordered 2.0ohms and that is what I'm vaping now.! It's become one of my favorites. F/T has it for $16.43--it is authentic!

Just received my second one!

https://www.fasttech.com/p/1805708

https://www.fasttech.com/product/1727000

what he ^^^^^^^^^^^^^said, "kanger new updated dual coil"

here are some decent shots
Cheap Original Kanger Aerotank Mow for Kanger Aeroank Emow Kit Online with $10.79/Piece | DHgate

I think it would look really nice on the Hybris, but I prefer single coils I can rebuild & wick with Rayon or Cartos, Just a ME Thing.

If you like dual coils and don't mind buying them, I think it would be a great match up with the Hybris.

Thanks for the input and the links.

Vape On
Burnie

 

[IMRs]

I quit using Protanks because of the tight draw, might have to try an AFC and see if that helps. But I have so much right now that Don't get used, no need to order more stuff, at least at the moment.


Vape On
Burnie

The air control valves are only 4.85 at myvaporstore! You can fully open the valve and get a pretty 'airy' draw if you don't like the tightness-plus you don't get any gurgling or flooding OR wobbling. It was well worth the 10 bucks (I got 2) for me. I highly recommend it Burnie. .
The MOW is super nice, but I'm in the same boat as you with rebuilding the singles.
I actually wish they would come up with a pyrex single coil evod because I use the evods at work all the time. Lately I've been noticing a couple having hair line cracks in them-but I'm still able to use them. No leaks yet, but I'll have to get some replacements pretty soon.
Oh, I should be getting my rayon soon. I ordered at Anasa Vapes Sunday. There's 5 evods for 15 bucks over there (all black).
He has some good prices on most of his stuff! Thanks for the heads up on that store!!

 

[sando7]

i'm always on the look-out for smaller Tanks/RBA/RDA's for my 14500/14650 mec's, when i find them i'll try to post what's appropriate for the Hybris.

would love to have a long list of 14 to 17mm Atty's to pick from, here is another Small Rda
http://www.vaporider.net/rebuidable-atomizer-bt801-with-air-flow-controllable-system/

and info on it,
http://www.thedigitalcig.com/Dream-BT801-1_b_54.html

 

[Burnie]

The air control valves are only 4.85 at myvaporstore! You can fully open the valve and get a pretty 'airy' draw if you don't like the tightness-plus you don't get any gurgling or flooding OR wobbling. It was well worth the 10 bucks (I got 2) for me. I highly recommend it Burnie. .

Guess I need to look at them, sound really good.

The MOW is super nice, but I'm in the same boat as you with rebuilding the singles.
I actually wish they would come up with a pyrex single coil evod because I use the evods at work all the time. Lately I've been noticing a couple having hair line cracks in them-but I'm still able to use them. No leaks yet, but I'll have to get some replacements pretty soon.

Here you go on a Glass EVOD
$6.36 Authentic eVod Glass BDC Clearomizer - 1.5ml / 1.5ohm / blue at FastTech - Worldwide Free Shipping
Sold out of Black & Silver

Oh, I should be getting my rayon soon. I ordered at Anasa Vapes Sunday. There's 5 evods for 15 bucks over there (all black).
He has some good prices on most of his stuff! Thanks for the heads up on that store!!

You will like the Rayon, once you get the amount right in the coil. Just remember it takes more than cotton.

Here are some coils I added to my FT order I just got today. NR/R/NR 2.4Ω and the first one I pulled out hit right on 2.4Ω, got it in my Sophia right now wicked with Rayon. They also have them tight coils, which I got a pack of them also, for the price not bad.
$2.16 Pre-Coiled Welded Wires - NR-R-NR (50-Pack) 50-pack - 33 AWG / 2.4ohm / 32*32mm at FastTech - Worldwide Free Shipping


Vape On
Burnie

 

[Burnie]

i'm always on the look-out for smaller Tanks/RBA/RDA's for my 14500/14650 mec's, when i find them i'll try to post what's appropriate for the Hybris.

would love to have a long list of 14 to 17mm Atty's to pick from, here is another Small Rda
Rebuidable Atomizer BT801 With Air-flow Controllable System - VapoRider

and info on it,
Dream BT801-1

That's a nice looking dripper, not a bad price either, Thanks

Anything you find would be a Welcome post here.

Vape On
Burnie

 

[IMRs]

Guess I need to look at them, sound really good.


Here you go on a Glass EVOD
$6.36 Authentic eVod Glass BDC Clearomizer - 1.5ml / 1.5ohm / blue at FastTech - Worldwide Free Shipping
Sold out of Black & Silver



You will like the Rayon, once you get the amount right in the coil. Just remember it takes more than cotton.:

Yes, you can not beat these valves, especially for the price.
Those evods are too cool. Looks like the tip is removable (what a bonus). I do not like metal tips!! Thanks for that. I didn't even know they existed. They look real nice and no problem that the black and silver are gone. I've been wanting to do a couple different colors lately anyhow. I guess I should put my order in now so I'll at least have them by Christmas.
When I got the sample of rayon last week, I popped it in and everything went well, first try! The stuff is awesome... Thanks again Burnie!
By the way, I was wondering if anyone can tell me why I'm not getting notifications in my email for new posts on this thread. How do you make sure the settings are correct. I know I subscribed to this but I never receive any emails even though someone here is posting at least once a day??? Any info would be appreciated. Thanks

 

[IMRs]

i'm always on the look-out for smaller Tanks/RBA/RDA's for my 14500/14650 mec's, when i find them i'll try to post what's appropriate for the Hybris.

would love to have a long list of 14 to 17mm Atty's to pick from, here is another Small Rda
Rebuidable Atomizer BT801 With Air-flow Controllable System - VapoRider

and info on it,
Dream BT801-1

That's a pretty nice rebuildable sando! Any chance of putting your own tip on that? Like I mentioned to Burnie, I'm not too crazy about metal tips.

 

[IMRs]

Burnie, I went ahead and ordered 2 new original evods and just one of the glass. At first, I was going to order more of the glass ones and realized later that they are actually the dual coils. I wish they would make a glass with the single coil. I'm wondering if a single coil base will fit in one of these glass tanks.

 

[Burnie]

Yes, you can not beat these valves, especially for the price.
Those evods are too cool. Looks like the tip is removable (what a bonus). I do not like metal tips!! Thanks for that. I didn't even know they existed. They look real nice and no problem that the black and silver are gone. I've been wanting to do a couple different colors lately anyhow. I guess I should put my order in now so I'll at least have them by Christmas.
When I got the sample of rayon last week, I popped it in and everything went well, first try! The stuff is awesome... Thanks again Burnie!

No Problem, might get some myself on my next order.

By the way, I was wondering if anyone can tell me why I'm not getting notifications in my email for new posts on this thread. How do you make sure the settings are correct. I know I subscribed to this but I never receive any emails even though someone here is posting at least once a day??? Any info would be appreciated. Thanks

No Idea
I turned mine on for instant notification (had all emails turned off), we'll see if it works for me.

Vape On
Burnie

 

[Burnie]

Burnie, I went ahead and ordered 2 new original evods and just one of the glass. At first, I was going to order more of the glass ones and realized later that they are actually the dual coils. I wish they would make a glass with the single coil. I'm wondering if a single coil base will fit in one of these glass tanks.

Well that sucks, I don't like duel coils. Did a quick search and fould this, "It will not work with single coil replacement coils from original EVOD.", but as you said, I wonder if the whole base from an old EVOD will replace the duel coil base??? Something you could try when you get yours in, and let us know

Vape on
Burnie

 

[Burnie]

No Idea
I turned mine on for instant notification (had all emails turned off), we'll see if it works for me.

Vape On
Burnie

It worked for me. I just set it in my Subscribed threads to instant email notification, and it sent me an email with the text of your last post IMRs. Try to turn it off then turn it back on, other than that i don't know.

Vape On
Burnie

 

[IMRs]

Well that sucks, I don't like duel coils. Did a quick search and fould this, "It will not work with single coil replacement coils from original EVOD.", but as you said, I wonder if the whole base from an old EVOD will replace the duel coil base??? Something you could try when you get yours in, and let us know

Vape on
Burnie

Yeah, I used the dual coils for about a year or so and they just suck up too much juice AND battery juice. Well, It'll just be another collectors item.
I'll definitely get back with the results of the coil bases. I have a feeling they're not going to fit. We shall see (maybe in a month: bought them from fasttech).

WEird! Now I'm getting the notification emails that I was talking about.

 

[Burnie]

From what I am reading the Old EVOD base will not work, but a PT2 mini base will. This thread might shed some light.
http://www.e-cigarette-forum.com/fo...r-coils-base-fit-evod-glass.html#post12853430

Vape On
Burnie