Not a large tank, I have vaped 1/2 a tank in the last few hours, but no gurgles or dry hits. Took a few minutes on the new coil for it to taste/hit right, but it is doing good now.
Thanks much for the info. I might just go for that. It's half of what I paid initially. Is that for the kit? I didn't go on the site to look. I'm actually in a hurry right now. I got my mini AVC's a half hour ago and working so fantastic. I'll post pics of the setup (mini Protank II, with AVC on Hybris) later- if not later tonight, they'll be posted tomorrow. It looks pretty cool and tastes wonderful. Gotta go- talk during the weekend.
It looks very tempting Burnie!
It does work well, but I'm not really liking this version of the air control valve because it is Real difficult to turn the dial. So far, a real pain in the ....! There is a couple different versions of the mini ACV. I'm going to check out those to see if I might like them better. I believe this is an aerotank base?- not sure.
This will be the 4th different one I have gotten. Anyone try their liquid?
I can never seem to get a company that does watermelon any good. There were a ton of good reviews on it, so we shall see. Nice job on the wrap! Oh, I will use my Robust wrap on my old Hybris since a new one is on its way. Exactly what did you have to tweak on it (the wrap)? Not sure if I understood what you had to trim for a perfect fit.
Well, I went for it! Thanks for the coupon code Burnie and the nudge. I selected watermelon for the juice and I will try it.
You know you wanted to anyway. Hope your juice is good. I tried the Flue Cured I got with my first order. Not really bad, just not my taste. Also seems really thin, 100% PG? I normally use 60/40 in my DIY juiceThanks
It was a pain doing all the cutting, but I liked how it turned out. Also put a wrap on my spinner/twist, futzed up the first I tried, but the second looks good. The Vinyl sample I got was matte white, no shine, so today I ordered a 10 pack of gloss white Inkjet Waterproof Vinyl (didn't have samples of it). I think it will look better with a little shine. In the back there is about a 3mm overlap. I put it on and let it overlap (don't press down the top of the overlap really tight), then took a razor blade (paint scraper
) and carefully cut down the center of the overlap (making sure to go through both pieces), peel the top piece of the overlap you cut off, then lift up that side of the wrap carefully, then peel the bottom piece of the overlap you cut off, then press the top back down, now it will aline to the cut you made down the back. Does not matter if it is exactly straight as both sides will be cut the same and line up to each other. The only way I can see the joint is because of the pattern difference. Try it a couple of times with a piece of tape or something just so you get the feel of what I am saying and you don't ruin your wrap. Not really that hard once you get the hang of it.
Thanks for the info. Now I will have to give you a nudge to get some Air Control Valves. Like I said before- Besides the improvement with using Rayon, these seriously top it off. Eric at Discountvapors has a nice variety of Kanger Mini ACV's and the 2 bigger ones for the Protanks were from myvaporstore, who had a better price on those. The using the mini's that I got yesterday and the flavor is awesome. I just sent an email to Eric asking if the other 2 versions of the mini that I saw are a little easier to twist. That's the only down fall with them because when you do want to change the airflow, you have to be careful not to unscrew the device and when going the other way, you have to watch you don't over tighten, so what I've been doing is just taking it of the mod to adjust it (if needed). I'll let you know what he says and if the others are better, I'll let you know and you can decide if you want to get some...NUDGE.
Kanger Airflow Control Valve - Protank II, Protank 3, Aerotank
I'll be back with an answer on the mini's as soon as Eric replies. He's usually prompt, but I'm not sure about weekends.
(Edit: I'm sorry, Erics Protank ACV's ARE a little cheaper, but they're out of stock, so I'd still buy those at myvaporstore...only a .36 cent difference).
Eric said they're all pretty stiff, but overtime, as I assumed, they'll get a bit easier to maneuver. I figure it this way-when you find the sweet spot, you shouldn't have to move it all that much.I have a couple of 20mm ACV, just no Mini ACV for the Hybris, not that I have a need for one at the moment, but will look at them.
Vape On
Burnie
I had a hard time choosing which one to get and I ended up getting 2 Aerotank versions. 1 of each would have been a good idea (just for cosmetic reasons). I like how they both look. 
