I gotta stay away from...

[Myrany]

Fab earlier in this thread I posted my banana cream pie recipe that came out pretty good. I think THeSteve tried might find out if he liked it. It is my dessert vape de jour at this point.

Tonights project is recoiling about a dozen clearo heads and taking stock of my DIY supplies for my monthly order. I really need to pick up more 60 ML luer lock needle bottles. I mix in big batches so I can do it like once a month and be set.

current fasstech order finally shipped. Another mech a DID clone and assorted RDAs. My AGA-Ts should be in this week and my stainless steel mesh early next week.

SO lots of lovely vapemail coming!

 

[fabricator4]

Fab earlier in this thread I posted my banana cream pie recipe that came out pretty good. I think THeSteve tried might find out if he liked it. It is my dessert vape de jour at this point.

Tonights project is recoiling about a dozen clearo heads and taking stock of my DIY supplies for my monthly order. I really need to pick up more 60 ML luer lock needle bottles. I mix in big batches so I can do it like once a month and be set.

current fasstech order finally shipped. Another mech a DID clone and assorted RDAs. My AGA-Ts should be in this week and my stainless steel mesh early next week.

SO lots of lovely vapemail coming!

I'm just not completely sure about banana, or creamy type flavours. I'll have a look, if I can get some concentrates that don't include diacetyl.

For larger batches up to 100ml I'm thinking about getting one of these. (not that one, something like it.)

 

[Schnarph]

I solved my conundrum!

 

[fabricator4]

I solved my conundrum!

You took ALL the boxes of food?

 

[Wizzlefits]

Tonights project is recoiling about a dozen clearo heads and taking stock of my DIY supplies for my monthly order. I really need to pick up more 60 ML luer lock needle bottles. I mix in big batches so I can do it like once a month and be set.

current fasstech order finally shipped. Another mech a DID clone and assorted RDAs. My AGA-Ts should be in this week and my stainless steel mesh early next week.

SO lots of lovely vapemail coming!

I wound my first internal micro coil yesterday! (A micro coil inside ekowool) Pretty niffty setup.... but, one of those things that once you try it... the novelty wears off real quick. LOL!
My FT order shipped Monday. Now it's a race to see what gets here first. My 5 pre-orders, or FT. I'm betting on FT. Actually... I was starting to go through vapemail withdraws! So I had to order some drippers, spare parts & a little juice. Should have 4 packages this week so that "should" help clam my nerves. hehehehe!

I almost bought the Innokin 134... had it in the cart but just couldn't do it. It's cool as heck... but I USE my mods & take them everywhere. That thing would most likely get me in trouble. Set that thing on the table in a restaurant and see how many people freak out thinking it's some kind of weapon. LOL!
But then again... that might be kinda fun!

Think I will get a Russian RBA. Always wanted a really nice mechanical and RBA. I got the Precise ELA on order so the mech part it totally covered.

Okay... done rambling for tonight! (bout time eah!)

 

[Myrany]

I'm just not completely sure about banana, or creamy type flavours. I'll have a look, if I can get some concentrates that don't include diacetyl.

For larger batches up to 100ml I'm thinking about getting one of these. (not that one, something like it.)

If you go with flavor apprentice and the exact ones I list in the recipe = no diaceytl or acetoin (which can become diacetyl) I am super picky about not using it EVER my friend

I use graduated cylinders all the time. I used a teachers discount at an educational chemistry supply place to get a full set.

 

[Shadav]

I'm just not completely sure about banana, or creamy type flavours. I'll have a look, if I can get some concentrates that don't include diacetyl.

For larger batches up to 100ml I'm thinking about getting one of these. (not that one, something like it.)

not sure but diyflavorshack has banana and banana cream diy flavorings, i'm sure if you asked Dawn could tell you about diacetyl or possibly make a batch without it for you....

 

[Schnarph]

There's a clone of the Russian RBA out already, I found an interest thread in the place where that kind of thing happens. If you have the money, best get the real thing. That's general advice that applies almost all the time, but once in a while the clone is better.

Yes, I took all the boxes! I will feed the needy! It's going to cost me time and shipping charges, but somebody's got to do it! I'm no stranger to PIF. Not that it really matters to anyone else, but I give at least as much as I receive to keep the guilty conscience at bay.

 

[Myrany]

There's a clone of the Russian RBA out already, I found an interest thread in the place where that kind of thing happens. If you have the money, best get the real thing. That's general advice that applies almost all the time, but once in a while the clone is better.

Yes, I took all the boxes! I will feed the needy! It's going to cost me time and shipping charges, but somebody's got to do it! I'm no stranger to PIF. Not that it really matters to anyone else, but I give at least as much as I receive to keep the guilty conscience at bay.

You have a kind and generous heart Schnarph!

 

[Schnarph]

You have a kind and generous heart Schnarph!

Maybe. Honestly I'm just being pragmatic. I don't want a guilt complex. I blame my parents.

I forgot to ask, what grade of SS mesh did you order and what pg/vg ratio do you normally use?

 

[Myrany]

Maybe. Honestly I'm just being pragmatic. I don't want a guilt complex. I blame my parents.

I forgot to ask, what grade of SS mesh did you order and what pg/vg ratio do you normally use?

lol

400 and 50/50

No need to suffer guilt trips my friend

EDIT: Tracking says the AGA-Ts are in Shreveport and should be here tomorrow! WOOO HOOO Play Time!

 

[The Ocelot]

Good lord! Kanger already has a mini Protank 2 on the market

Kanger MINI ProTank 2 Glassomizer | Potion Vape

 

[Schnarph]

I need to find a good place to purchase non-resistance wire, preferably silver. It's some pricey stuff, like jewelry!

I will soon take the next step up into vape equipment, making NR-R-NR coils.

@Myrany- I hope you didn't order very much SS mesh...

 

[SirSteve]

I didn't think I would like banana either, but I like Myrany's recipe. It does need to steep to allow the flavors to mix, the banana is pretty strong at first, but steeps nicely.

I only got 400 mesh, but it works good and the mesh wicks don't really need much maintenance. I have rinsed my wicks and allowed them to dry, and while they were doing that I dry burned the coils, the mesh and coils last a long time. I did the ehuman solid wick and use 30 gauge kanthal in my RBA's and it holds up pretty good. Probably use silica or cotton with 32 gauge in the dripping atty from fasttech when I get it. A little mesh and roll of wire from Temco will last me a long time.

It still amazes me how willing you are to learn, and how quickly you seem to do it, good luck with your new toys Myrany.

 

[Schnarph]

I carefully remove the coil and mesh wick together and torch them after everything is rinsed. Once I get rid of the hotspots I don't like messing with a coil. That's how I used to do it anyways, before I tried silica sleeving. It's a little pricey, but it only takes a half inch or so for each coil and it makes everything soooo much easier.

Dangit! My order from FastTech isn't even here yet and they already have new stuff that I want.

 

[Myrany]

I carefully remove the coil and mesh wick together and torch them after everything is rinsed. Once I get rid of the hotspots I don't like messing with a coil. That's how I used to do it anyways, before I tried silica sleeving. It's a little pricey, but it only takes a half inch or so for each coil and it makes everything soooo much easier.

Dangit! My order from FastTech isn't even here yet and they already have new stuff that I want.

Is this the silica sleeving? Nextel Braided Ceramic Very High Temperature Sleeving It doesn't seem THAT bad pricewise as 10 ft will last forever. Of course I oculd be looking at the wrong stuff

 

[Myrany]

I didn't think I would like banana either, but I like Myrany's recipe. It does need to steep to allow the flavors to mix, the banana is pretty strong at first, but steeps nicely.

I only got 400 mesh, but it works good and the mesh wicks don't really need much maintenance. I have rinsed my wicks and allowed them to dry, and while they were doing that I dry burned the coils, the mesh and coils last a long time. I did the ehuman solid wick and use 30 gauge kanthal in my RBA's and it holds up pretty good. Probably use silica or cotton with 32 gauge in the dripping atty from fasttech when I get it. A little mesh and roll of wire from Temco will last me a long time.

It still amazes me how willing you are to learn, and how quickly you seem to do it, good luck with your new toys Myrany.

I am glad you like the juice.

As for learning I may be an old lady but I will always remember something my Dad taught me.
"When you stop learning you start Dying"

I really believe that is true.

 

[Schnarph]

Is this the silica sleeving? Nextel Braided Ceramic Very High Temperature Sleeving It doesn't seem THAT bad pricewise as 10 ft will last forever. Of course I oculd be looking at the wrong stuff

The XS sleeving is the stuff, yes. I got mine from Kidney Puncher. The price is about the same, I only wanted a foot of each kind for starters, and I had to get some hard to find screws and grommets from them anyways.

You have a sample to try for yourself.

 

[Myrany]

The XS sleeving is the stuff, yes. I got mine from Kidney Puncher. The price is about the same, I only wanted a foot of each kind for starters, and I had to get some hard to find screws and grommets from them anyways.

You have a sample to try for yourself.

Even so nice to know there is a place to replace those grommets. Have that site marked now TY

You spoil me!

 

[Shadav]

why are dripping attys all stainless steel but tanks are plastic and glass?
I want/need a stainless steel tank with no silicon inwards grrrrrrr

gonna get frustrated to the point i'm gonna have to make my own lmfao see if I can remember any of my CAD/lathe classes all those years ago