Intro To The "3DFS ALPHA" By: Digitalciggz.com

[Drumonron]

Another Week, Another round at it:

at the request of a brutha vapuh

an updated list:

The Fraternal Brotherhood of the EQ

UN / order #
jimho 2196 ------------------------->shipped 08/01/2011----->1st one received!! on 08/04/2011
Drumonron 2197 - X2 ordered ------->shipped 08/01/2011----->received on 08/04/2011
mxbnw 2198 ----------------------->shipped 08/01/2011----->received on 08/04/2011
bengalbacker ????------------------->shipped 08/01/2011----->received on 08/04/2011
crippledbazooka 2200 --------------->shipped 08/01/2011----->received on 08/04/2011
mwa102464 2205 x2 ordered------>shipped 08/08/2011-------->received on 08/10/2011
rusty272 2206------------------------>shipped 08/08/2011---->received on 08/10/2011
Vtwin 2207------------------------->shipped 08/08/2011------->received on 08/10/2011
Friend of Atlas 2208---------------->shipped 08/08/2011-------->received on 08/10/2011
cypresss 2211---------------------->shipped 08/08/2011-------->received on 08/11/2011
A4tune8one 2212------------------>shipped 08/08/2011
Sacker 2213------------------------>shipped 08/08/2011-------->received on 08/10/2011
basilray ????----------------------->shipped 08/08/2011-------->received on 08/10/2011
NCC 2215-------------------------->shipped 08/08/2011
crazylegsnorthrup 2216-------------->shipped 08/08/2011-------->received on 08/11/2011
irukandji9111 2220------------------>shipped 08/10/2011
jifjifjif 2222------------------------->shipped 08/10/2011
simplydraven 2231
eastman 2233
ioicctsniw 2234
mspace 2237
Recht 2241
cdaugherty 2246
Cuseguy 2250
fenderbc 2253
Sponge Bobiwan 2260
Rottwyler 2266
dogtownvapster 2268
medman1234 2269
DTO 2274
Camp43 2277
Filthy-Beast 2280
Haadkoe 2291
ken729 2296
rockstarr 2561

37 units accounted for so far...

...nice!

The Original 100 placed orders beginning on July 1, 2011 @ 7:00PST
The Eclipse EQ's were all but gone in much less than a day's time.
We are bonded for eternity by this endeavor.

Points of interest:

1.)Shipping confirmation numbers started to be received on 08/01/2011
@ approx 02:24 pm PST / 05:24pm EST.

2.) First person to receive their EQ was Jimho!! on 08/04/2011 @ (see post for time)

Those listed are people who posted their order numbers....

....wanna be on the list? Post the order number.

Failures(returned for service):

1.) mxbnw
2.) Drumonron

 

[crazylegsnorthrup]

no eq for me today

 

[Sacker]

hurry up and unbox it... share your initial impressions.

all 4 mnke bats chargin at the moment, the bat that came with it was 3.5v, others 3.8v'ish.. doing a surface charge atm.

my initial impressions after opening the box .. it feels good in my hands, weight wise, I'm confident with the weight.

my hands are small, the part where it has it's curvature, wish that part was more curved.. where the web of your thumb/hand area was rounded further than it is now.

handling it for index finger to pump, and thumb to fire... seems like a natural fit for me.

justing waiting for the bats to recharg... LOL

the other bonus I had called on Sat to Michael, to add on 3 more Mnkes, and it arrived with my EQ, superb Customer Service.. on just a phone call.

 

[MXBNW]

Update

I heard from Michel, He is sending me prepaid shipping so I can return the unit. It will be replaced this time so they can study the unit and see what is going on.

 

[Drumonron]

Update

I heard from Michel, He is sending me prepaid shipping so I can return the unit. It will be replaced this time so they can study the unit and see what is going on.

Good news, MX...it makes sense to replace it...hope they do the same for me but we will never know as they have chosen NOT to serialize which, imho, was another bad decision.

I would engrave something in it but this, in all likelihood would void the warranty.

 

[Drumonron]

all 4 mnke bats chargin at the moment, the bat that came with it was 3.5v, others 3.8v'ish.. doing a surface charge atm.

my initial impressions after opening the box .. it feels good in my hands, weight wise, I'm confident with the weight.

my hands are small, the part where it has it's curvature, wish that part was more curved.. where the web of your thumb/hand area was rounded further than it is now.

handling it for index finger to pump, and thumb to fire... seems like a natural fit for me.

justing waiting for the bats to recharg... LOL

the other bonus I had called on Sat to Michael, to add on 3 more Mnkes, and it arrived with my EQ, superb Customer Service.. on just a phone call.

so, what do you think of the EQ's pump? Is this not the coolest?

 

[Drumonron]

I see Shadow lurking...shout out to Shadow....wussup, brother?

 

[mwa102464]

OK my 2nd EQ is now up and running guy's and running with a Iken Mini HV-801 on it, the vapemate adapter fits Shadows Proprietary feed adapter like it was built by Mario and made for the EQ, and I do mean fits it EXACTLY like it should. I just started using #2 and using the Iken Mini HV-801 is pure Bliss on the EQ it is like dripping on an 801 and we all know how good that can be, well this is far superior to dripping because that wonderful pump is doing my dripping ! I will report back soon, My #1 unit has had a couple of resets so far so I don't know whats up with this yet being it may have been something I have touched or not but I think not. I also have a small concern with the Battery compartment and how snug the Batts fit next to the wires and bottom connection and my bottom battery screw on unit #2 doesn't seem correct so i may need another it doesn't turn nice and smooth like my other unit does. But so far all and all both units seem to be working well other than what I mentioned, and vaping SUPER !

 

[retird]

My Eq should be here TODAY!

Surely a video will follow.......

 

[MXBNW]

Good news, MX...it makes sense to replace it...hope they do the same for me but we will never know as they have chosen NOT to serialize which, imho, was another bad decision.

I would engrave something in it but this, in all likelihood would void the warranty.

I will know if mine has been replaced the juice bottle door never fit right.

 

[mwa102464]

Update, 801's even Mini 801's dont work well they flood to much how they work, stick to 510 & 306 Atty's guys, to bad but I have to tell ya this, the way the 801 works it just isnt built for this PV since you need an adapter and the liquid doesn't pull up through and adapter into an 801 well, however the Cannon Atty's will probably be OK since they have a 510 thread on them !

 

[irukandji9111]

Order #2220...Just got my shipping notification. Shipping out today.

 

[mwa102464]

Running both units with 510's now, one with a Janty Reg standard resistance Atty and one with an Iken HV-510 both units are running like pure Bliss for me. I have noticed the resets though and I have had a couple of them, I noticed that it is easily dont if your palm touches the front touch pad area and had a couple of those, I also however had a couple when the unit was just sitting for a bit then I picked it up and vaped,, it reset back to the first position green light all by itself.

 

[rusty272]

order #2206 received .. fast shipping! Thanks! Michael and Mario

 

[Vaporologist]

order #2206 received .. fast shipping! Thanks! Michael and Mario

Kingsport? I'm just a few minutes away in JC. On my way...

 

[cuseguy]

Running both units with 510's now, one with a Janty Reg standard resistance Atty and one with an Iken HV-510 both units are running like pure Bliss for me. I have noticed the resets though and I have had a couple of them, I noticed that it is easily dont if your palm touches the front touch pad area and had a couple of those, I also however had a couple when the unit was just sitting for a bit then I picked it up and vaped,, it reset back to the first position green light all by itself.

Hmm, the resetting issue is starting to loom pretty large. We need Mario to chime in and address what might be happening here.


---
- Sent from my iPhone 4 using Tapatalk

 

[jimho]

Update, 801's even Mini 801's dont work well they flood to much how they work, stick to 510 & 306 Atty's guys, to bad but I have to tell ya this, the way the 801 works it just isnt built for this PV since you need an adapter and the liquid doesn't pull up through and adapter into an 801 well, however the Cannon Atty's will probably be OK since they have a 510 thread on them !

I was wondering about using a cannon- but I don't have a 510-801 tip adapter.

 

[mwa102464]

I was wondering about using a cannon- but I don't have a 510-801 tip adapter.

there is an adapter that is sold for the vapemate, I'm not going to mention the suppliers name but I'm sure you know who it is Jimho, it fits it perfect, like it was made by Digitalciggz for the EQ. I am running one next in a little bit

 

[Friend of Atlas]

Received EQ today

 

[MXBNW]

there is an adapter that is sold for the vapemate, I'm not going to mention the suppliers name but I'm sure you know who it is Jimho, it fits it perfect, like it was made by Digitalciggz for the EQ. I am running one next in a little bit

I am interested this as well. If I order today it should be here when my EQ gets back.