- Status
Couple of additions for the Depth Charge.......
First up is a tube for the bottom of the DC to keep it from moving downward. I find myself bumping it and it works it's way down to the top of the mod. Cut a piece from an 801 the right size and it fits just right. Since it's not sealed, the air flow isn't affected.
Then, I wanted to adjust the draw on the DC carto as well as some "airy" bottom feeding PV's so I modded an 801 delrin drip tip. Two disks, the bottom one fixed, and the top one with a slot to turn it with a screwdriver. The 2 holes in the disks are offest so when you turn the top one the opening opens and closes. Dial it in to just right......
First up is a tube for the bottom of the DC to keep it from moving downward. I find myself bumping it and it works it's way down to the top of the mod. Cut a piece from an 801 the right size and it fits just right. Since it's not sealed, the air flow isn't affected.
Then, I wanted to adjust the draw on the DC carto as well as some "airy" bottom feeding PV's so I modded an 801 delrin drip tip. Two disks, the bottom one fixed, and the top one with a slot to turn it with a screwdriver. The 2 holes in the disks are offest so when you turn the top one the opening opens and closes. Dial it in to just right......
I've got one of Jonah's tanks.........completely made of stainless steel. I picked it up at Vapefest. I wanted to pick up a few more off his site, but i'm guessing it was a Vegas exclusive for now 
Jonah, i'm hoping your surgery was lap, but if your gall bladder burst, i'm guessing they had to open you up & clean you completely out. DEFINITELY take time that you need to heal, & splint those stitches. We miss you
Jonah, i'm hoping your surgery was lap, but if your gall bladder burst, i'm guessing they had to open you up & clean you completely out. DEFINITELY take time that you need to heal, & splint those stitches. We miss you
Sorry, just got home from work & am too lazy to take more photos........but this is the all stainless tank that I got from Jonah in Vegas. It's on the P18. GAWD, it's gorgeous! It's almost like they were made for each other. Jonah also had STERLING SILVER drip tips at his table. I only wear silver or platinum, & I wanted one of those drip tips so bad it nearly killed me to walk away without buying one. I had to make a choice though.........eat while in Vegas, or buy the sterling drip tip. LOL. Yeah, I like to eat.
I do have to hand it to Jonah though. This was my first vape meet besides the local Houston meets. I fully EXPECTED that vendors would be debuting new & upcoming hardware. To my surprise.............Jonah was the ONLY vendor that did this. I mean........that is what the "big" vape meets are all about right? He definitely had the best mods/hardware available at vapefest.
I do have to hand it to Jonah though. This was my first vape meet besides the local Houston meets. I fully EXPECTED that vendors would be debuting new & upcoming hardware. To my surprise.............Jonah was the ONLY vendor that did this. I mean........that is what the "big" vape meets are all about right? He definitely had the best mods/hardware available at vapefest.
Looks great... That'd look great on my Precise+
Sent from my ADR6400L using Tapatalk
Sent from my ADR6400L using Tapatalk
I posted this elsewhere, but I think it brlongs here. I got a Torpedo Tank last week and just started playing with it. I was wondering if anyone knew if it could be filled all the way to the top or how full can I fill it with liquid?
Thanks!
Thanks!
I would only fill it about 80% of the way because CE2's all leak a bit. To fill it you either use a syringe and remove your drip tip and fill it through the filler holes or remove the top cap itself, fill and replace it.
That looks SWEET! I see you got the brushed look. Hoping my polished one shows up in the next day or two. We have a monthly vape meet in Toronto that I'm hoping to debut it at.
DEFINITELY want a Polished stainless steel tank to sit on top of my Chrome Provari. Hey, I wonder if the tolerances are too tight for be to have the tank chromed...
I could probably take a photo of it on the prodigy V3 when i get home from work tomorrow. I'm thinking just like most tanks on the Prodigy, you would want to use a 510/510 shorty connector because the connection is so recessed.
Thanks for the comments on my new all stainless tank.
As far as filling your Torpedo Tank.........don't fill it up past the ceramic or plastic WHITE cup--you don't want juice going down the center of that cup---I usually just pull the entire top cap off & POUR my juice in the tank. However, you could use a syringe
Thanks for the comments on my new all stainless tank.
As far as filling your Torpedo Tank.........don't fill it up past the ceramic or plastic WHITE cup--you don't want juice going down the center of that cup---I usually just pull the entire top cap off & POUR my juice in the tank. However, you could use a syringe
Hey bmwjen,
I love your SS Depth Charge!
I can't wait to be able to order it... A couple of questions for you, if you don't mind.
How much extra was the SS tube add-on?
Which other new goodies did Jonah display at his booth?
Thanks.
I love your SS Depth Charge!
I can't wait to be able to order it... A couple of questions for you, if you don't mind.How much extra was the SS tube add-on?
Which other new goodies did Jonah display at his booth?
Thanks.
I could probably take a photo of it on the prodigy V3 when i get home from work tomorrow. I'm thinking just like most tanks on the Prodigy, you would want to use a 510/510 shorty connector because the connection is so recessed.
Thanks for the comments on my new all stainless tank.
As far as filling your Torpedo Tank.........don't fill it up past the ceramic or plastic WHITE cup--you don't want juice going down the center of that cup---I usually just pull the entire top cap off & POUR my juice in the tank. However, you could use a syringe
Yes it looks good. Thanks that would be great to show how that SS looks on the Prodigy V3. I am all set with a couple of short 510 adaptors/connectors.
I like my CEs better than standard "filled" cartomizers, so it's actually an all stainless CE tank. This way when the CE dies someday my husband can rewick it with ss mesh.
Jonah just had everything beautiful at his booth. He had the nice jewelry cases with glass tops displaying everything. I picked up some blown glass drip tips from him as well. I'm really hoping that he puts them up for sale. I just can't keep thinking about the STERLING silver drip tips he had.
Here are 2 photos with the SS tank on the Prodigy V3.1, & of course another of Jonah's tank on the P-18. It fits the P-18 like a glove No adapter needed, even on the Prodigy
(one pic is the tank on the prodigy with the 510/510, & the other pic is of the tank with no adapter.)
Jonah just had everything beautiful at his booth. He had the nice jewelry cases with glass tops displaying everything. I picked up some blown glass drip tips from him as well. I'm really hoping that he puts them up for sale. I just can't keep thinking about the STERLING silver drip tips he had.
Here are 2 photos with the SS tank on the Prodigy V3.1, & of course another of Jonah's tank on the P-18. It fits the P-18 like a glove
No adapter needed, even on the Prodigy (one pic is the tank on the prodigy with the 510/510, & the other pic is of the tank with no adapter.)
Hey bmwjen,
I love your SS Depth Charge!
How much extra was the SS tube add-on?
Which other new goodies did Jonah display at his booth?
Thanks.
Attachments
I want one of those SS tanks, but I want mine polished, so it will look all sexy on top of my Chrome Provari. Definitely interested in the Sterling Silver Drip Tip...
I talked to Cherry Vapes and they are thinking of putting out the SS Ming drip tip as a polished version as well, so I'm keeping an eye on that.
I talked to Cherry Vapes and they are thinking of putting out the SS Ming drip tip as a polished version as well, so I'm keeping an eye on that.
i got some boge LR 2.0; but this one is 2.3 ohm; carto's for my Depth Charges, and they fit just fine... gotta say i really like his product...
I put it in the smaller one and it vapes better imo than the Dual Coil imo, that i have on a liquinator dc tank; smoother and a bit cooler.
I wonder if the boge's will fit on the longer tube DC....? or do they make XL cartos in SR or 2.0+ ???
I put it in the smaller one and it vapes better imo than the Dual Coil imo, that i have on a liquinator dc tank; smoother and a bit cooler.
I wonder if the boge's will fit on the longer tube DC....? or do they make XL cartos in SR or 2.0+ ???
- Status
Similar threads
- Locked
