Kayfun LITE

[Akdare]

Has anyone tried GP Fluff for wick building? It's actually for GP Spheroid and Heron atomizers but it looks like it could do the job for kayfun builds as well.

Linky:

http://www.vapourart.com/en/product/gp-fluff-version-2

The GP fluff is not meant to be used as wick. It holds the liquid inside of the bell.

 

[crss]

Fluff, is to only hold fluid... Not act as a wick. The out come will not be a positive one. The kayfuns tank holds the fluid, IE acts as the fluff. Let me know you it works out for you =O

 

[tnt56]

Are you filling from the top or the bottom? Mine occasionally leaks when I fill from the top, but if you cover and release your finger in the correct order it usually isn't a problem. I've never had a leak when I fill from the bottom through the screw hole.

Bottom fill so far. I'm gonna give it 24 hrs and see if any seeping occurs.

 

[Akdare]

I thought at first that my KFL was leaking from the air screw, because whenever I removed it from the mod, there was a layer of liquid on the bottom of the KFL, and on top of the mod. I purchased a hybrid kit, and observed that I no longer had any seepage from the bottom of the KFL. I concluded that what I thought was a leak from the air screw was merely condensation of vapor that had come out of the side airhole and collected in that teeny gap between the atty and top cap. I no longer worry about it...just wipe it off...

 

[mykereid]

Bottom fill so far. I'm gonna give it 24 hrs and see if any seeping occurs.

I think I'd check for broken/distorted o-rings.

 

[mykereid]

I thought at first that my KFL was leaking from the air screw, because whenever I removed it from the mod, there was a layer of liquid on the bottom of the KFL, and on top of the mod. I purchased a hybrid kit, and observed that I no longer had any seepage from the bottom of the KFL. I concluded that what I thought was a leak from the air screw was merely condensation of vapor that had come out of the side airhole and collected in that teeny gap between the atty and top cap. I no longer worry about it...just wipe it off...

After a deep vape, I get quite a long vapor stream out of the side airhole. Makes sense that might cause a buildup of condensation.

 

[bsoplinger]

After a deep vape, I get quite a long vapor stream out of the side airhole. Makes sense that might cause a buildup of condensation.

I had that until I taught myself to let off on the switch and still inhale clearing out the last of the vapor as the coil cooled down. No more condensation issues after that.

Sent from my Nexus 7 using Xparent Purple Tapatalk 2

 

[Flt Simulation]

The v2 version of the Kayfun Lite Plus not only has an o-ring, but I also think that think they have increased the size of the fill screw, and it is now also counter-sunk deeper in the base.

No leaks at all, and it is now very easy to fill with the standard plastic tips that most juice bottles come with ... no need for one of those needle type fill tips on the juice bottles.

Much better design than before ...

 

[horton]

Any idea regarding the size of that little O-ring? I can barely see the darn thing let alone measure it....lol

 

[mykereid]

The v2 version of the Kayfun Lite Plus not only has an o-ring, but I also think that think they have increased the size of the fill screw, and it is now also counter-sunk deeper in the base.

No leaks at all, and it is now very easy to fill with the standard plastic tips that most juice bottles come with ... no need for one of those needle type fill tips on the juice bottles.

Much better design than before ...

This is my first Kayfun, so had nothing really to compare it to. But yes, it's counter-sunk very well. Not much to complain about when it comes to the Kayfun Lite Plus, other than PBusardo's complaint that you shouldn't need a screwdriver to refill the tank. I agree.

 

[Flt Simulation]

Not much to complain about when it comes to the Kayfun Lite Plus, other than PBusardo's complaint that you shouldn't need a screwdriver to refill the tank. I agree.

Exactly ....

 

[Moodyfisherman]

If you look into the hole for the screw and the countersunk area around it do you see anything odd? Left over flashing from the machining process, some foreign object or material lodged in there, maybe a gouge or some other type of damage? When you install the screw how tight do you usually snug it down? If you look closely do you see any damage on the o-ring itself?

My second KFL V2 came with a hard piece of green plastic in the bottom of the air flow adjustment screw chamber....took 2 hours to dig it out without damaging the threads....doh.....called Vaperev and asked if anyone else has called that received an extra goodie in thier device....I was the only lucky one they heard of yet...emailed SvoёMesto but they never answered....

 

[sparc]

Kayfun lite is back in stock at vaperev, just a heads up.

 

[LReyes66]

Got one for my girlfriend. Bout time I'd upgrade her from the black edition clone.

Sigh but I was gonna use that money on a RDA.

Sent from my Nexus 5

 

[Lowjack12]

Does anybody know if anybody makes a kayfun lite window made of polypropylene?? I've seen some Ehpro kayfun clones advertised as having translucent windows made of polypropylene but I can't seem to find any company that sells them by themselves.


Sent from my iPhone using Tapatalk

 

[LReyes66]

Told my girlfriend I got her an authentic v2... Then she tells me she's fine with her n I didn't need to get her one... -_-... Well that was a waste of money. Maybe I can cancel before they ship it.

Edit: nvm. as soon as i wrote this I got the email that its been shipped.

Sent from my Nexus 5

 

[finagle69]

Told my girlfriend I got her an authentic v2... Then she tells me she's fine with her n I didn't need to get her one... -_-... Well that was a waste of money. Maybe I can cancel before they ship it.

Edit: nvm. as soon as i wrote this I got the email that its been shipped.

Sent from my Nexus 5

Chicks, man...

Enjoy your new V2!

Sent from my HTC One using Tapatalk

 

[LReyes66]

Lol already have one and I only vape 2 juices. I also ordered an extra from intaste on Monday making this one from vaperev my 3rd.

Sent from my Nexus 5

 

[finagle69]

All good. I vape 2 juices and have 3 kfl and an r91.

Sent from my HTC One using Tapatalk

 

[TheKiwi]

Lol already have one and I only vape 2 juices. I also ordered an extra from intaste on Monday making this one from vaperev my 3rd.

Sent from my Nexus 5

Oh hi I'll be your girlfriend. We can go over the details (like the "girl" part) after you gift me a kfl


Burping out loud using Tapatalk