Kayfun LITE

[Heavyrocker]

It has finally happened:

My KFL clone from FT has finally stopped leaking,ive only had the tank for 2 weeks and ive done a few rebuilds and always had leaking tru the air hole.My last attempt i made sure i clipped the end lead wires really close to the screw heads and realligned the coil above the air hole.I had excess wire that was making juice run over the deck and flooding...on tank 2 and all good so far.I went to work with in laided on its side all day and bone dry.One more tip.make sure you blow tru the air hole after every refill and its dry,juice tends to ''build up'' in there it seems.

 

[Heavyrocker]

Nice job twisting that wire. How hard is it to do that?

Cool coil.

 

[Heavyrocker]

Nice shot Q!

Is that leaking juice all over that thing.....

 

[tnt56]

I've been using a couple of clones. Don't know who made em, but their not to bad. Neither have the adjustable air flow so their styled after the KFL original. One leaks out the fill screw and the other is dry as a bone on the outside. Since I got some new "O" rings in I may try and swap out "O" rings over my days off.
Draw is about the same to me as the original KFL.

 

[ricks]

I just got one from Fasttech and its really nice. Threads are smooth and not a scratch on it. Will try it out tonight at 9.

 

[Heavyrocker]

I have the KFL from FT and its the best atty i have to date,i was going to get the Russian and others with air flow control with all the bells and ''whistles'' pun intended,but i like to go for the simple things in life.The KFL has a perfect air flow as it is.BTW...this tank does not leak when you get it built right,took me a few refills to get er rightmbut onuce ya do,there is no turning back,this tank design is going piu the Genie back in the bottle.

 

[JulesXsmokr]

My new KFL plus V.2 came in from VapeRev yesterday. Oh my......
Definitely a sight much better looking than my 2 Black editions from ebayer ***2010
The finish is both brighter and flawless inside and out, you can tell this has a higher quality of Stainless that is used here...
The threads on this are monstrous and baby .... smooth not scratched in looking...
Some parts are thicker and have very nice machining detail in all the tiniest hard to reach areas.
I really like the kfl clones I have and will continue to use them for all my at work and play use,
but this will be used at home with my best juices, (mostly homebrews).
I took it all apart when I got it and it was so clean that I didn't want to give it my usual dawn scrubby toothbrush wash, but I did anyway..(You never know)..
I will try out a new coil build on this, and see how she vapes. The air hole on this looks a bit bigger than the clone. The new drip tip with dbl. o-rings looks top notch also.
Now, I saw a video of a 3 strand twisted coil made with 32g. that looks worthy of this unit, that will be the first build in here..
There's a few more nice things to say about this little gem, but I am anxious to get a build on here..

 

[Bronze]

My new KFL plus V.2 came in from VapeRev yesterday. Oh my......
Definitely a sight much better looking than my 2 Black editions from ebayer ***2010
The finish is both brighter and flawless inside and out, you can tell this has a higher quality of Stainless that is used here...
The threads on this are monstrous and baby .... smooth not scratched in looking...
Some parts are thicker and have very nice machining detail in all the tiniest hard to reach areas.
I really like the kfl clones I have and will continue to use them for all my at work and play use,
but this will be used at home with my best juices, (mostly homebrews).
I took it all apart when I got it and it was so clean that I didn't want to give it my usual dawn scrubby toothbrush wash, but I did anyway..(You never know)..
I will try out a new coil build on this, and see how she vapes. The air hole on this looks a bit bigger than the clone. The new drip tip with dbl. o-rings looks top notch also.
Now, I saw a video of a 3 strand twisted coil made with 32g. that looks worthy of this unit, that will be the first build in here..
There's a few more nice things to say about this little gem, but I am anxious to get a build on here..

Anything machined in Germany is going to be top shelf. Germans don't make crap. They might over build and over design at times, but they never make crap. The Svoemesto Kayfuns will all be premium quality materials and workmanship.

 

[Heavyrocker]

I work for a German company,we make elevators,taking bout over building,we are so busy its insane.

 

[Bronze]

I work for a German company,we make elevators,taking bout over building,we are so busy its insane.

Would that be Otis?

 

[Heavyrocker]

Thyssenkrupp.Not the biggest elevator company but we have over 5000 workers.ThyssenKrupp has round about 157,000 employees on all five continents working hard to provide the products and services required by our mainly industrial customers.

What are ThyssenKrupp's main areas of activity?

Customized steel grades, plastics and aluminum – these are just some of the materials ThyssenKrupp supplies to business partners in more than 80 countries worldwide. We also produce technology goods such as elevators and escalators, complete industrial complexes, components for areas such as cars and wind turbines, as well as modern marine systems. ThyssenKrupp has round about 157,000 employees on all five continents working hard to provide the products and services required by our mainly industrial customers.

 

[Bronze]

Thyssenkrupp.

Yep, that's German!

I drive by an (or thee) Otis plant in (I believe) it's South Carolina.

 

[TheKiwi]

Speaking of South Carolina.... Beach vacation at myrtle right now


Burping out loud using Tapatalk

 

[Bronze]

Speaking of South Carolina.... Beach vacation at myrtle right now


Burping out loud using Tapatalk

I'd fit in a couple rounds of golf while I was down there.

 

[Heavyrocker]

Yep, that's German!

I drive by an (or thee) Otis plant in (I believe) it's South Carolina.

Seems like they are all over da place.

 

[Stratman]

I drive by an (or thee) Otis plant in (I believe) it's South Carolina.

Otis! My man!

 

[Heavyrocker]

Otis! My man!

Ding Dong...13th floor....Otis Redding is cool.

 

[Stratman]

Ding Dong...13th floor....Otis Redding is cool.

So is Otis Day

 

[Bronze]

As is Otis Campbell.

 

[JulesXsmokr]

here's that twisted wire build, sorry for the crappy phone photo... 1.2 ohms