MVP Owners Group-into the next generation

[herb]

@herb Exactly! Most of the times that I switch a topper from one device to another (for a battery change/charge or whatever) I don't notice a difference but sometimes putting a topper on something after a run on the MVP I can tell a difference at the same setting and chnaging setting doesn't help.

Yeah , the signal that the MVP has provides a very special vape for sure , i guess thats why a veteran in the "ask the veterans " forum said the below :

IMHO, the MVP is very close to a ProVari in vape quality.

Makes sense actually , they both have a very similar signal.

I am running a 1.8 ohm single in my new Magma and the flavor blows me away! I love this thing!

Edit: at 7.5 -8 watts

Holy cow , 7.5 -8 watts and your getting great flavor with the magma , i haven't tried that low but i 100% believe it .

 

[Desertfremen]

Whats everyones preference here in terms of PG vs. VG? Im currently finding that I prefer higher VG for the vapor production.

Its funny- when I started I was all about throat hit. Now, throat hit is meh and I prefer vapor production. The good things about PG are that it seems to provide a little more flavor, it doesnt seem to gunk up coils as fast, it wicks better, and the hit feels "stronger". VG has the CLOUD though.

Im currently prefering a 70%vg/30%pg 12mg blend. My 60%pg/40%vg 12mg blend sort of feels "hollow" when I exhale. I think im going to get some higher vg of the same flavor and mix it to thicken the mix/cloud. Curious to hear about other's experiences with PG/VG

I have been all over the board with this. There have been times when I preferred all VG and times when I went to the other extreme with all PG. I've been many places in between as well.

Now, I find myself preferring more VG, pretty much where you are actually 30/70 PG/VG. Sometimes, with certain flavours, I do want a "dryer" vape and go for 50/50 but this is now the exception to my overall preference.

 

[Midniteoyl]

Why must there always be a voice of discontent.


Sent from my iPhone using Tapatalk

Wouldnt be free speech otherwise...

 

[herb]

Besides when everyone agrees it's extremely boring , wishing death on a fellow member is good for the soul , as long as it's sporadic and not constant .

 

[OneBigDude]

Any deals on the Aspire BVC coils still? Just replaced both in my 2 Nautilus tanks and need some back ups now. Love the Nautilus on my MVP.

 

[inswva]

Any deals on the Aspire BVC coils still? Just replaced both in my 2 Nautilus tanks and need some back ups now. Love the Nautilus on my MVP.

$9.95 here:

http://www.evape.us/nautilus-bvc-replacement-coil/

 

[amoret]

The 1A chargers most likely are ok and that's what the other wart I have here is (I think the one at the office is too). Just don't want to use the one that went flaky on the good stuff anymore. And now that one is out of the picture I figure I better get a replacement And a spare to have on hand. It's cheaper for me to order than buying local as prices here tend to be a bit high - the downside is the wait. Can use the computers until they get here but don't always have the laptop powered up and don't really care for extra wires hanging off it.
Doesn't surprise me that it went wacky - the charger for the ego twist that came with it ended up with a split case the third time I used it. Got those from a place local and some of their stuff is definitely low end - made the one purchase there and have even thought about buying from them again.

If you are ordering anyhow, I really recommend the Amazon.com: Antec Quad Port USB Charging Station (UA4-25): MP3 Players & Accessories since it lets you charge multiple items and you don't have to get at the wall outlet to use it.

 

[mac63]

If you are ordering anyhow, I really recommend the Amazon.com: Antec Quad Port USB Charging Station (UA4-25): MP3 Players & Accessories since it lets you charge multiple items and you don't have to get at the wall outlet to use it.
View attachment 370079

That might be ok to use but a bit pricey and bulky for me. Ended up getting 2 of the dual port .5A. S/H costs were more than the units but still came out less than other ones I looked at.

 

[ValkyrieCT]

What can we say about our MVP's? They are solid,tough,versatile and trustworthy something to be said about that.
View attachment 370106

 

[pufZeppelin]

What can we say about our MVP's? They are solid,tough,versatile and trustworthy something to be said about that.
View attachment 370106

you said it all

all that and a bag of doughnuts

and it's cheap too...




- Patriot Style Rebuildable Dripping Atomizer-Black
- V5 Rebuildable Dripping Atomizer-Gold

- HH.357 Long Barrel Hybrid 510 Atomizer - Avid Vaper
- Atomizers - Avid Vaper

 

[pufZeppelin]

Whats everyones preference here in terms of PG vs. VG? Curious to hear about other's experiences with PG/VG

I have been all over the board with this. There have been times when I preferred all VG and times when I went to the other extreme with all PG.
I've been many places in between as well.
Now, I find myself preferring more VG, pretty much where you are actually 30/70 PG/VG.

PG irritates my throat so I stay VG strong, & now that I’ve got somewhat ‘conditioned’

I can tolerate more PG, maybe 50/50 max, but it still makes my throat sore - - I prefer

70-80% VG (a little PG keeps wicking honest) most my DIY comes out to 35/65(PG/VG)


8-o

 

[pufZeppelin]

WOW, this is a busy thread, how nice!
Hubs and I love our MVPs and are looking to pick up a couple more - anyone know of a good Labor Day sale going right now? I think I will go with the "Petals" edition this time. Very pretty for the ladies.
Thanks so much for any sale info, and I will definitely start reading this thread. So many nice people and such great information.

hi nanny
welcome to the club

yepper, this thing moves right along, hard to keep up AND wrap coils, fill tanks, charge batteries, etc

just some of the better deals I know of - maybe ya can find some coupon codes too...

- iTazte MVP 2.0
- Innokin iTaste MVP V2.0 - 101 Vape
- https://www.completevape.com/innokin-itaste-mvp-20-2
- WORLDofVAPE - Search Results for "MVP"

and here is a couple of teasers

- iTaste MVP v2.0 Kit - Black [WSV-MVP-BK] - $24.99
- MVP – Vape Dojo
seems a great price “While there NOT in stock”
conspiracy theory-I think yes…

 

[pufZeppelin]

My new friend, looks llike I need to take her somewhere special...

hey nice job, you said you were gonna go get one AND YA DID !

so how was the "vape-meet" ?

did you see lots of cool stuff ?

 

[pufZeppelin]

Don't know if this is something to be concerned about or not.
Haven't my 2 units very long. Got them and used each until the charge went low enough for yellow. Put them on the charger and the yellow came on steady for each but didn't last long before going to steady green until full charge then went out. I know this is normal charging process.
Mow for the strange part. Been using them the past couple days with no problems. Last night one went to yellow so I put it aside. This morning I put it on the charger. Instead of getting a steady light it cycles through all 3. When the cycle gets to green, the green will flash a couple times - 2 quick then the third time is sometimes quick and the cycle repeats. Other times the third lighting of green stays longer - sometimes 1 or 2 seconds and sometimes longer - there have been some as long as 8 or 9 seconds.
Charge was at 3.7 when starting and is up to 4.0 now. First put in on about 3 hours ago and have pulled off a few times to check and attempt to reset. Have had it in both on and off mode while on the charger and it gets the same thing. One of the times that I took it off the charger, I put a tank on and everything functioned normally.
Is this cycling while charging something to be concerned about?
Is there something that can be done to rest so that the charging process shows a steady light (as I currently believe is how the normal process works)?
Thanks in advance for any insight on this.

I had some trouble like this with a VVv3 of mine

moving it around 'While Plugged In' it went nuts and always gave me a light show

I believe it was from dripping with it and using it as 'passthrough'

I cleaned both connectors and used CANNED AIR and it fixed it about 95%

still does it a little, but now I'm aware and am very careful with plug in

(believe I weakened the connector on VVv3)

 

[pufZeppelin]

I just got rolled by ECF for a password update

 

[Raslin]

hey nice job, you said you were gonna go get one AND YA DID !

so how was the "vape-meet" ?

did you see lots of cool stuff ?

It was great, sampled quite a lot of juice. OMG tasted a red hot cinnamon, had an out of body experience[emoji39] lots of cool devices.

But other tan the MVP, the only other one that I lusted after was a ePipe version 2.

Got a EMOW doe the wife and son inlaw.

 

[pufZeppelin]

wowzer

checking the numbers
a week ago today (SUNDAY) we closed old thread

in a week closed it shows over 10,000 views

739,651 / 749,681

lotts of peeps interested in the MVP it seems...

 

[pufZeppelin]

It was great, sampled quite a lot of juice. OMG tasted a red hot cinnamon, had an out of body experience
lots of cool devices.

But other tan the MVP, the only other one that I lusted after was a ePipe version 2.

Got a EMOW doe the wife and son inlaw.

that's great

I WANT a MOW

did you get the kit, or just the tank ?

- Kanger MOW Pyrex Dual Coil Clearomizer w/Air Flow Control

gonna get one here soon

 

[pufZeppelin]

@herb I am going to order some of those clone coils for the i30.

I have rewicked an i30 with rayon. Worked real good until I tried it again. They use such a thin wire to get the 4.4 ohms that it either didn't like another dry burn or the rewick broke one of the coils.
I rebuilt one with a single coil but it was too much work. Better to try those $1 coils.

You all sure post a lot while I am at work.

yepper, those coils are a tuff one for me – they’re fussy
almost impossible to trim off excess wire INSIDE bottom
after you have rebuilt it… (i16/i30 & T2 styles)

plus I believe they use NR-R-NR wire

- $5.91 Authentic Innokin Coil Heads for iClear16 Clearomizer (5-Pack) 5-pack - 2.1ohm / dual heating coil at FastTech - Worldwide Free Shipping
- http://www.fasttech.com/products/0/10004507/1634100-replacement-coil-heads-for-t2-clearomizer-5-pack

 

[Raslin]

@pufZappelin , got the kit, here in South Africa it's better value for money to just get the whole kit. The tanks cost about 60% of the kit price.