Yep got it and love it! Also the skin for the istick 30 fits really well. One question though. Is there anyway to turn off the display of the MVP 3 while its firing? The MVP 2 never did that.
MVP Owners Group-into the next generation
- Thread starter pufZeppelin
- Start date
- th_trl_thread_readers 0
- Status
Yep got it and love it! Also the skin for the istick 30 fits really well. One question though. Is there anyway to turn off the display of the MVP 3 while its firing? The MVP 2 never did that.
you know, I don't think that is an option
I don't have one yet, but all reviews i've watched
never seen anyone do so...
only real difference added was
ability to 'flip' screen display...
blue painters tape
My avatar is Tasha, my other Terv. Great dogs!
Wish I could have gone to Vape Con Tampa instead of being stuck working in West Palm Beach. Tampa is actually closer to home and my son lives there. Oh well, guess it's better to eat than spend $ on vape gear. (did I really say that?)
AquaVaporCig is holding a blizzard sale in which you can save 25% store-wide and get free shipping on any purchase! Just use coupon code blizzard at checkout.
Innokin iTaste MVP 3.0 $69.95 => $52.46 with FREE shipping!
Innokin iTaste MVP 3.0 Variable Voltage / Wattage eCigarette Box Mod - Charge Electronic Accessories with Internal 2600mAh Battery
Innokin iTaste MVP 3.0 $69.95 => $52.46 with FREE shipping!
Innokin iTaste MVP 3.0 Variable Voltage / Wattage eCigarette Box Mod - Charge Electronic Accessories with Internal 2600mAh Battery
the T3S coil is a SINGLE coil (not bdc)
only difference between the T3S & bcc coil is the flange plate
View attachment 416272
there is a lip inside the T3S tank which requires the smaller diameter flange...
early on I discovered this and the smaller T3S coil fit in all my EVODs/Protanks
so I only bought T3S coils (evod coil WONT fit in a T3S tank)
note: do not confuse the newer T3'D (bdc)
against the old T3S (bcc)
jus sayin'
I'd like to add to this detailed description that the T3S coils can also be used in dual coil kanger tanks by stacking the chimney gasket from one head onto that of another. This creates enough of a seal that one gets no leaking or gurgling. Just a tip!
So while I was at a convention yesterday I picked up a Tugboat V2 clone by Tobecco for $10 and the verdict is...
The MVP 3 is great for dripping with a dual parallel .5 ohm build
The MVP 3 is great for dripping with a dual parallel .5 ohm build
Thanx Puf...you are the "T3S Pro"!
At a MFS "50% OFF Coils Sale" I loaded up on T3S coils (that was before the Nautilus BVC's...which I'm now "moving over" to...hit the scene).
I like the T3S tanks...but they're only 3ml....and I feel that I'm filling them (like the one Nauty Mini I have) constantly.
So...I guess my "T3S-Using-Tank-Larger-Than-3ml." search continues...
Modify the T3S coil for use in a dual coil tank and use an Aerotank Mega? 3.8 ml capacity, glass, airflow control...
Interestingly the last T3S and MT3S tanks (starting last summer)I got no longer have that lip.
While the MT3Ses are clones from FT, the T3Ses are supposed to be genuine.
I searched back in August trying to find more on when the change happened, but no luck.
A local shop that opened last Feb has only ever had the new style, and doesn't have coils that fit the old style.
ya know I noticed those anyvapes toppers and just
kinda glanced and moved on...
seems taking hints from the kanger UNI tank (top fill)
then of course the DAVIDE put them on the map (which is a copy of ProTank)
looks like the CERO uses (2) coils aspire bdc/bvc and kangers bdc (not bcc)
but the peak-o-mizer has a spring loaded center pin (again uni tank) that
will allow (3) coil designs - kanger bcc, bdc and aspire bdc/bvc
if you line all the coils up, they look like this (Im making up the acutal numbers)
-kanger bcc single 2mm height
-kanger bdc dual 4mm height
-aspire bdc/bvc 6mm height
so not close, but THREE different coil height dimensions...
guess the spring loaded do-dad allows top fill and universal coil fitment
from my experience with the unitank, anything similair SCARES me
and then the price !!!!!!!!!!!!!!! (who they kidding)
- Anyvape Peakomizer Kit SR036 - Stainless
- AnyVape Davide Glassomizer
- Kanger Airflow Control Valve - Mega V2
------------------------------
single coil baby ! thats where its at ! (super simplicity)
capacity / air flow / glass / dis-assemble / drip tip / (& rebuildable)
- Kanger SubTank Mini
- Subtank Mini 22mm - Kanger Subtank - Kangertech - Clearomizers Tanks
- Subtank Nano 18.5mm - Kanger Subtank - Kangertech - Clearomizers Tanks
- Kanger Subtank Organic Cotton Coils (OCC)
I own the Anytime Peakomizer SR036 and use it on either my MVP2. and MVP20w allong with my PT2's and Kanger Mini Subtank.. With the Peakomizer I use the Kanger single coils 1.80, like/love the top filling and havn't once had a problem with mine.
hey cool, peak-o-mizer is working for ya
top fill and using the bcc coils, good deal !
yepper, it is very strange that kanger held on to the lone wolf coil
for so long (why not make all small flanged?)■weird they would all of a sudden
after all this time make a change
I discovered the SMOK RBC (evod style) and it works so good, very cheap,
all my kanger bcc coils fit - so I stopped messing with the kanger bcc tanks■
I liked some of the kanger bdc tanks which also has air flow, but just DONT like
the dual coil set up■ so I converted the bdc to bcc and use them that way sometimes
then I made an adapter piece to able the bcc coil to fit into the bdc tank- meh
------------------------------------
I also have some NON authentic T3S/MT3S tanks without that inner lip
and I liked them a lot■ have not heard of genuine T3S/MT3S with no lip
guess I dont care anymore■ times are-a-changing
I have done this both ways
take the bdc (dual coil) and re-wrap them in a single mode...
then also made a 'spacer' from tubing, slipped it over the bcc (single) coil
and it made up the space inside do the single bcc coil now works
I can't see adding one silicone cup being enuff to fill/seal gap
but if it works then that is great !
I have just returned to the single coil tanks and that is about
all I use anymore and very happy with them...
Vape≈Smart
there is a bunch of those larger capacity bcc single coil tanks still...
I cant believe Ive YET to get a hypertank
- SMOK HBC 6ml
- SMOK MBC 6ml
- SMOK PBC 5ml
- Hypertank v2 5ml
- Kamry X9 4.5ml
- SMOK GBC 4ml
- SMOK NBC 3.5ml
- SMOK Trophy V2 3ml
- Bottom Coil Tanks - Tanks & Clearomizers - Atomizers & Cartomizers
- HyperTank 2
So while I was at a convention yesterday I picked up
a Tugboat V2 clone by Tobecco for $10 and the verdict is...
The MVP 3 is great for dripping with a dual parallel .5 ohm build
sounds pretty cool !
so were you at this convention , by chance ?
big Phil B. was there...
- http://vapeinthefort.com/
that is a fine looking doggie
- - -
I also thought about VCCT - Vaping Convention Curcuit Tampa
but unfortunately, thats as far as I went (thinking)
- - -
haha, awhile back reading a post someone said:
save money on vape gear, eat more/better food
was their life motto...
had me rollin (can't remember who, what, where)
maybe it was you
scrambling around these several posts talking the old T3S coils
made me think about my old FAV set up (which I still use)
I was VERY HOT with my mini T3S on my Kanger EVOD 650 mah (non VV)
had the EVOD kit (2-650/2 evod tanks) battery putting out regulated 3.7v
and came with 2.5Ω coils a lousy match set-up (like 5W)
then I started figuring it out and came across 1.8Ω coils
(remember when there was the little evod coils & the big protank coils)
WOW, what a DIFF ! (at that time also found out about T3S coil size)
I ordered my spanking new MVP and a mini T3S and the 1.8Ω coils
well how could it get any better than this
so as a jester of good faith, I just re wicked my 1.5Ω coil in my
mini T3S, fill with fresh juice and screwed it on my old EVOD 650mah/3.7v
sweet pleasure, small compact steathy & puts out small thick tastey clouds
shoulda stuck with that and would be hundreds of dollars ahead of the game
this is STILL a killer deal (especially for beginners)
- Kanger EVOD Starter Kit - Blue - Rock Bottom Vapes
aint vaping great !
I have done this both ways
•take the bdc (dual coil) and re-wrap them in a single mode...
•then also made a 'spacer' from tubing, slipped it over the bcc (single) coil
and it made up the space inside do the single bcc coil now works
View attachment 416473
I can't see adding one silicone cup being enuff to fill/seal gap
but if it works then that is great !
I have just returned to the single coil tanks and that is about
all I use anymore and very happy with them...
Vape≈Smart
I do much the same thing. BDC are fine, but I find that a rebuild to a larger single coil in a BDC head usually performs better and gives me better flavor. Still, I have all of these BCC heads floating around...
Even from your picture, it doesn't look like there's much of a difference between your spacer and a chimney cup. (Shrug) It works, what can I say?
hey cool, peak-o-mizer is working for ya
top fill and using the bcc coils, good deal !
The Anytime Peakomizer is really very solid (SS), it's made very well, come with an extra glass tank and I expect it to last a long time. It's dependable and with the right coil the flavor is great and select the air flow that you want for the vape. I find the Kanger single coils 1.80 gives me the best flavor. I been so often thought of ordering a few more as I see they are selling for around 16.00 now. I tried to see if I could get the Mini RBA in it but the RBA is to big for it due to then metal cross bar in the Peakomizer tank. So instead I'm going to get another Kanger Mini Subtank as I cheap (yes!) and don't want to buy many coils.would rather just rebuild.
Last edited:
- Status
Similar threads
