New Kayfun Lite 24mm and 22mm

[muth]

muth .....

Thanks a bunch for the info

I think I will order the YFTK version of the 22mm kayfun Lite 2019 from 3F vape:
Buy YFTK KF Lite 2019 RTA Silver 316SS 22mm Rebuildable Tank Atomizer

Also the Long Mode kit for the YFTK version from fasttech:
$4.50 YFTK Replacement Long Mode Tank Kit for 22mm KF Lite 2019 Styled RTA Atomizer - 4ml at FastTech - Worldwide Free Shipping

Did 3fvape run out of long mode kits? Last time I looked they were short on KFL 2019 stock all around.

 

[Flt Simulation]

muth .....

3F Vape does have the long mode kit .... I didn't realize that at first.

But, I have now ordered the kit from 3F instead of Fasttech.
____________________________

The one thing I cannot find is just the 22mm plastic extended tank section by itself (if the plastic tank breaks) ...

I guess you would need to order the complete kit again (with the included metal extender)

 

[MikeE3]

muth .....

3F Vape does have the long mode kit .... I didn't realize that at first.

But, I have now ordered the kit from 3F instead of Fasttech.
____________________________

The one thing I cannot find is just the 22mm plastic extended tank section by itself (if the plastic tank breaks) ...

I guess you would need to order the complete kit again (with the included metal extender)

I haven't been able to find replacement long mode tanks (22 or 24 mm) either OEM or clone. I picked up a couple complete FT kits as spares for my OEM nKFLs.

 

[Tabac man]

Ok ... I found the 'Long Mode' kit for the 22mm version of the Kayfun 2019. Increases juice capacity of the 22mm atty to 4.0ml

Does anyone know who makes the best quality clone of the Kayfun 2019 ? .. (maybe YFTK or SXK) ?

I have two YFTK clones and an authentic. There's only two ways to tell the difference.

1. The clones have no branding on the bottom.
2. The clones are polished better.

Both clones are wearing authentic Kayfun parts and they fit perfectly ie Long mode kit and xs centre pin. Bought from Naturevape in the UK.

 

[MikeE3]

I have two YFTK clones and an authentic. There's only two ways to tell the difference.

1. The clones have no branding on the bottom.
2. The clones are polished better.

Both clones are wearing authentic Kayfun parts and they fit perfectly ie Long mode kit and xs centre pin. Bought from Naturevape in the UK.

I've got 4 Svoe nKFLs and my original 2 SXK clones I bought to 'try out' before springing the big bucks. The SXK/Svoe parts/tanks are interchangeable.

The Chinese are superb at making counterfeits ... sometimes the same company contracted to make 'originals' during 1st shift turn out counterfeit items during the 2nd/3rd shift. My son is in the wholesale end of outdoor equipment and clothing (climbing, camping, hiking, etc). He said it's commonly known that the tier 2 and tier 3 manufacturing facilities do this 'hanky-panky'. The better brand names compete to get tier 1 plants as they seem to be more ethical and also have better quality control.

 

[Mordacai]

@Flt Simulation, the 24mm Ulton KF lite 2019 has an extended capacity kit.

24mm Ulton KF lite 2019 link.
ULTON KF Lite 2019 Style 24mm RTA Rebuildable Tank Atomizer 3.5ml - Silver

24mm Ulton KF lite 2019 extended capacity kit link.
ULTON Long Mode Kit for 24mm Version KF Lite 2019 5ml

I'd always get an Ulton clone if I can, as they're 1:1, materials are good and machining is excellent. You'll probably need better o rings though as they'll not be great, but at least they're easy to retrofit.

 

[Flt Simulation]

I am wondering if any aftermarket company will start selling a glass tank tube section for both the 22mm and 24mm Kayfun Lite 2019 ... both in the standard length and in the longer 'extended' length tubes.

I think I would like that better than the frosted plastic tank tube that these attys comes with.

 

[Edgree]

I am wondering if any aftermarket company will start selling a glass tank tube section for both the 22mm and 24mm Kayfun Lite 2019 ... both in the standard length and in the longer 'extended' length tubes.

I think I would like that better than the frosted plastic tank tube that these attys comes with.

The sxk clone tank is clear not frosted and fits the authenitic. I like the plastic tank personally I dont have to worry about breaking the glass tank since I abuse the hell out of mt gear at work.

Sent from my SM-J337A using Tapatalk

 

[access0denied]

Anyone else having issues with the Lite leaking through the 510 airflow adjustment?

 

[Pinggolfer]

Anyone else having issues with the Lite leaking through the 510 airflow adjustment?

I take it original version. I had the nKFL for about a month and sold it, but it didn't leak through the 510 connector. Just bought another nKFL and it isn't leaking too. Q on the original thread said he removed the air flow grub screw and had no leaks. Don't know what to tell you. Try the original thread. Authentic Svoemesto Kayfun Lite - 2019 Version

 

[Pinggolfer]

I am wondering if any aftermarket company will start selling a glass tank tube section for both the 22mm and 24mm Kayfun Lite 2019 ... both in the standard length and in the longer 'extended' length tubes.

I think I would like that better than the frosted plastic tank tube that these attys comes with.

The frosted turns clear as soon as you put ejuice in it.

 

[Tabac man]

Anyone else having issues with the Lite leaking through the 510 airflow adjustment?

Never had that problem. If it's getting past the plastic grub screw then the grub is toast and needs replaced. You should have spares. Maybe you adjusted it too often and wore it down? Set it and forget it would make sense, rather than too much fiddling. The screws in the second batch were longer than the first batch because some of them leaked.

 

[muth]

I take it original version. I had the nKFL for about a month and sold it, but it didn't leak through the 510 connector. Just bought another nKFL and it isn't leaking too. Q on the original thread said he removed the air flow grub screw and had no leaks. Don't know what to tell you. Try the original thread. Authentic Svoemesto Kayfun Lite - 2019 Version

Agree. My friend removed his grub and I don't hear any complaints.

 

[Azidhaka]

Anyone else having issues with the Lite leaking through the 510 airflow adjustment?

Yes, happens with the authentic as well. SvoeMesto released longer nylon screws (6 mm). Your best option is to put some PTFE tape on the screw before screwing it it.

 

[Pinggolfer]

Yes, happens with the authentic as well. SvoeMesto released longer nylon screws (6 mm). Your best option is to put some PTFE tape on the screw before screwing it it.

I disagree as if you open the screw all the way it not needed. The only way mine will leak out the A/F screw is if I overfill the tank.

 

[Tabac man]

If some eliquid goes down the air hole it will travel down the pin and come out the air slot in the pin, from there into the base. If there is no plastic grub screw in place it can also travel down and come out the bottom onto the 510 connection. Seems obvious really.