NEW RoyalSmokers C-E2 R4 Review, Tips, Info, Help, Video

[badkolo]

i cant honestly tell anyone to buy these, im sorry.
ill give away all the ones i have but they wont be of any use unless your modding it and thats if you can get it to work properly.

the e2 was never an issue like this and we can fix the e2 in 2 minutes flat and make it the beast it is.

 

[mikecup]

Thanks Bad for taking one for us vappers.
You saved me some money for sure.

 

[badkolo]

well im dissapointed enough to take a nap, this ordeal just winded me, im gonna fall asleep to a bottle mod e2

v1john i can probaly add ptb in the stem hole of the tankomizer but the hole is so small and there is no gaurentee it will make full contact with the wick and coil underneath it, ill try it but im not to sure about it.

the ptb works in the e2 becuase its making contstant contact with the wick by the slits so its always wet but with the tankomizer feeding the wick and coil on this there doesnt seem a way to get the juice into the stem to keep the wick or ptb wet enough

 

[Weekend_warrior1999]

Just requested to cancel my two orders based on this review.. thanx Bad.... hopefully the request is caught before they process the order completely, lol

 

[Gummy Bear]

defiantly nap time.
but just a little practice nap.

 

[slopes]

Thanks Bad. A disappointment for sure.

 

[GiMante]

i cant honestly tell anyone to buy these, im sorry.
ill give away all the ones i have but they wont be of any use unless your modding it and thats if you can get it to work properly.

the e2 was never an issue like this and we can fix the e2 in 2 minutes flat and make it the beast it is.

We had such high hopes, I need a nap too.

 

[badkolo]

yea i tried 15 of them and not one gave me success and i lost 8 now due to death, so i cant give these the thumbs up.

 

[haft2doit]

Bad have you tried what someone suggested earlier and poke a hole in the top of the tank. I think vacuum could be stopping any wicking. I know it effects my E2's. Just one more simple test and I'll be happy

 

[v1John]

what ever happened with the pyrex mod?

haf2doit, they're not worth it; 8 bad ones in one day is worse than terrible for a $12 carto

 

[ScottB]

It’s tough to sing the praises of the E2 with all of its faults and all of the blatherings in just this thread – and they’re mostly true… but, I haven’t used an atty since I got my first R4’s. Along with the transparent mods, I’m rotating 6 shorty (3 ohm) units right-out-of-the-box and I love ‘em.

True juice flavor.
No nickel foam to crud up and carry over flavors.
No flooding. No leaking. Extremely portable (full) for travelling.
Vape at almost any angle until damn near dry.
Super easy to clean & dry burn.
Longer battery life because of shorter on-time drags.
Very good longevity.

I read all over this forum and the drippers are getting more & more into de-bridging their atty’s… especially after they begin to perform poorly. Hell, E2’s come de-bridged.

Compared to themselves & their earlier versions, they’re easy to criticize, but until something truly better comes along, they’re what I’m buying.

After your disappointment-nap, get done with the pre-fabbed ptb’s bad, I’ve got some XL’s coming…

 

[badkolo]

what ever happened with the pyrex mod?

i have to go check if it arrived.

im gonna make a hole on top now and try it but i think that will defeat the purpose of how we get the vapor in our mouths.

 

[haft2doit]

I know I just... Just... DON'T WANT IT TO BE SO!!!

 

[haft2doit]

Oh that should be cake. Just run a separate tube from the base of the carto to the mouthpiece making a complete system again. Problem solved? I know... it's hopeless.

 

[badkolo]

scottb, i agree fully, the e2 has issues but they are workeable and then with all the good things you mentioned it makes the e2 much more viable. i can get a e2 to work perfectly time and time again so they do what they should when they work. even though i can have a perfect looking e2 r4 and it still wont perform well but those are not the norm .

im starting to appreciate the e2 more after this mess today but i would appreciate it if martinez, yes you martines, i know your reading this, get your head out of you A hole and listen up you monkey.

i know you made the wicks longer , cause oyu told me so, i dont give a crap that your selling millions of e2's, that doesnt concern me or the fellow vapors here in this forum, fix the freaking e2 to our specs or else.

and im not playing aorund, fix them even further then you have or else. you dont want to make me angry cuase i can get viscous when im angry.

FIX THE E2 more, either remove the new sleeve or widen the e2, and make sure they are making the coil loose since im still getting e2's with a tight coil.

maybe im being harsh, he did improve the e2 but there is still room for improvement and that needs to be handled.

 

[Big Hitter]

I think I may sell my mini and grand when I get them. They just flood way to much in my opinion.

I'd be interested in that Mini... flooding with a REO is just operator error.

 

[v1John]

I wouldn't, Bad, you're paying $12 a carto when they should have paid you $24 a carto to tinker with, but that's just a thought.
Nothing against their wishful efforts, just the waste of money part. For 8 of these contratpions I could have almost bought a 100 pack of E2s

 

[CloudBurst]

Just think what they'd be selling if they worked like our mods! Have you seen all the bad reviews and folks that hate them? If they were right, they wouldn't hate them, they'd be all we'd buy. They'd eliminate attys and cartos easily. Oh well, at least mine work! Vape heaven with a syringe mod! I'm good to go.

 

[BanjoMan]

scottb, i agree fully, the e2 has issues but they are workeable and then with all the good things you mentioned it makes the e2 much more viable. i can get a e2 to work perfectly time and time again so they do what they should when they work. even though i can have a perfect looking e2 r4 and it still wont perform well but those are not the norm .

im starting to appreciate the e2 more after this mess today but i would appreciate it if martinez, yes you martines, i know your reading this, get your head out of you A hole and listen up you monkey.

i know you made the wicks longer , cause oyu told me so, i dont give a crap that your selling millions of e2's, that doesnt concern me or the fellow vapors here in this forum, fix the freaking e2 to our specs or else.

and im not playing aorund, fix them even further then you have or else. you dont want to make me angry cuase i can get viscous when im angry.

FIX THE E2 more, either remove the new sleeve or widen the e2, and make sure they are making the coil loose since im still getting e2's with a tight coil.

maybe im being harsh, he did improve the e2 but there is still room for improvement and that needs to be handled.

... and start shipping them with condoms again, ya cheap bastage!

 

[badkolo]

yes like i said 500 bucks down the tube but im in it to win it and find the worlds best cart/slash tank/slash atty.

thats why im angry at martinez, its so close and the fix can be made to make the e2's wick properly out the box, now i hope by now the e2's wick it new without any old cleaned off fluid on it, that should help but the new sleeve on the cup restrict thicker juice but works ok with thin dekang juice. not everyones juice is the same so the e2 needs some minor fixes.