**official canvape thread** - Part 2

[northofamerica]

I will try that but I have tried it on my Buzz Pro, Diamonds, LT mini, LT V1.5, and Ego, and it won't fire on any of them with the adapter. This is so weird

The positive connector on the 3ml sits too high up and the top center pin in the adaptor is not reaching. I push the bottom center pin up on the adaptor first, and the center pin from the firebird will push it down as you screw it in.
I had to do this with the ego adaptor I have so it would work on the 650mah twist I got. It sits too high to fire on the twist and the threading is tight when i screw it onto the twist, so I use the adaptor. I also got this adaptor from the boyz, and was different than my first one. The first one has a little tube for a top pin. this one looks like you could use a flathead screwdriver on the inside.

 

[ChellyNelly]

Yeah, I have that newer adapter type. This is a brand new adapter. I tried pulling the post up on my PVs and it didn't help. I'm not sure I understodd what you said in your post though, North. Were you able to fix this with the newer adapter types and if so how?

Thanks

 

[northofamerica]

Well... in case it is shorting things out, make sure you put it on a device with short circuit protection so nothing gets messed up too!

 

[therealcmac]

Yeah, I have that newer adapter type. This is a brand new adapter. I tried pulling the post up on my PVs and it didn't help. I'm not sure I understodd what you said in your post though, North. Were you able to fix this with the newer adapter types and if so how?

Thanks

Ahh i see the new ones are different. Hope you get it working.....

 

[northofamerica]

On the bottom of the ego adaptor, the positive pin/connector should look like a little washer and a hole in the middle. Push that pin up even if it looks like its not sitting down far enough to touch the positive connector in the lt or something.
Then screw it onto your 3ml firebird. If that pin you pushed is sitting too high, the 3ml firebird will push the pin down as it needs. Then screw the 3ml with ego adaptor screwed in onto the LT and try it.
The pin on the inside of the ego adaptor may have got pushed down is what the easy explanation is. Stardust's can do this.

 

[therealcmac]

I wonder if they changed the design of the adaptor so it would stop pushing pins down......

 

[northofamerica]

Here are pics of the one I am talking about.

Bottom pic sucked!
Push the post up on that thinger!!!

 

[ChellyNelly]

Oooooh UP as in into the hunk of metal?? I was pushing it DOWN. Okay let me try that..

Just tried my second FB and the ....ing adapter won't even thread into that one... ARGH!

 

[mopar]

Hey Mopar is your Vivi 2.5 made by Vision? I'm just wondering since it's so much cheaper than other places and you don't have the logo on the box pictured. Furthermore the wicks look like the shorter ones in v2 rather than the supposedly longer ones in v2.5

Mopar we definitly neeeeeed all of these.

Also some smoktech king kong steel drip tips

I think what you meant to say is Visions wouldn't allow you to sell their product so you had to find a different route.

I'm pretty sure you have no idea what your talking about

 

[ChellyNelly]

Oooooh UP as in into the hunk of metal?? I was pushing it DOWN. Okay let me try that..

Just tried my second FB and the ....ing adapter won't even thread into that one... ARGH!

Pushing it up didn't work either Do I really have to buy an Ego Twist in order to use this damn thing properly??? ALL I WANT TO DO IS VAPE MY FIREBIRD ARRRRRGGHHGHGHGHGHGGHGHHWRINFWKSERUJCYWENRQINW: KVERF

 

[brinks7]

I'm pretty sure you have no idea what your talking about

You know you neeeeed a black chrome and stainless steel vmax


And king kong drip tip. I figure I may as well add that to all my posts in here. Through repetition you will believe you want to order some.

 

[Mbrewster]

has anyone tried the green sound batteries?

maybe know their quality?

do they have the same rubber coating at the joys?

i just cant seem to find any info on them

Green Sound 1100mAh eGo-C Battery

those are the ones i was looking at

 

[northofamerica]

Pushing it up didn't work either Do I really have to buy an Ego Twist in order to use this damn thing properly??? ALL I WANT TO DO IS VAPE MY FIREBIRD ARRRRRGGHHGHGHGHGHGGHGHHWRINFWKSERUJCYWENRQINW: KVERF

LOL
Well. It doesn't like to screw down onto my 650mah twist. I have to use the adaptor. So that might just piss you off more if you buy a twist and it wont thread in nice. Even if I crank it down on the twist it doesn't fire

I watched lord davon's review on the 3ml and he learned me something good! You can poke/pop the metal piece (out of the top of black cover tube) that your drip tip fits into.
Take off the black skirt thing that goes over the plastic 3ml tank, pop the metal ring out the top by sticking a screw driver inside the bottom and pushing the top piece out, place the newly ejected ring on top of the plastic 3ml and reinsert your drip tip. You can also put the pen lid back on after this.
I find that with that black cover on the tube I have, the airflow is pretty weak and you get mean dry hits all the time. Without it, it breathes much better and vapes like a stallion. Too bad the silicon seal likes to let small traces of juice into the drip tip. I don't think the flap closes up and it might have got torn. Oh well works like a dream now.

King kong drip tips link for Mopar so brinks7 can maybe get his wish one day:
2012 Smoktech Kingkong steel tips will be good market - Detailed info for 2012 Smoktech Kingkong steel tips will be good market,smoktech kingkong steel drip tip,2012 Smoktech Kingkong steel tips will be good market,510/ego steel drip tips on Alibaba.

 

[brinks7]

LOL
Well. It doesn't like to screw down onto my 650mah twist. I have to use the adaptor. So that might just piss you off more if you buy a twist and it wont thread in nice. Even if I crank it down on the twist it doesn't fire

I watched lord davon's review on the 3ml and he learned me something good! You can poke/pop the metal piece (out of the top of black cover tube) that your drip tip fits into.
Take off the black skirt thing that goes over the plastic 3ml tank, pop the metal ring out the top by sticking a screw driver inside the bottom and pushing the top piece out, place the newly ejected ring on top of the plastic 3ml and reinsert your drip tip. You can also put the pen lid back on after this.
I find that with that black cover on the tube I have, the airflow is pretty weak and you get mean dry hits all the time. Without it, it breathes much better and vapes like a stallion. Too bad the silicon seal likes to let small traces of juice into the drip tip. I don't think the flap closes up and it might have got torn. Oh well works like a dream now.

King kong drip tips link for Mopar so brinks7 can maybe get his wish one day:
2012 Smoktech Kingkong steel tips will be good market - Detailed info for 2012 Smoktech Kingkong steel tips will be good market,smoktech kingkong steel drip tip,2012 Smoktech Kingkong steel tips will be good market,510/ego steel drip tips on Alibaba.

.

Thanks for the support NOA. Best "cheap" tips that you can actually drip with. Mopar should love them they have a huge gaping hole

 

[northofamerica]

3ml firebird w/king kong demo. Not my idea but my pics ;P

 

[martinc]

One more tip about firebirds and itaste tanks: they hate it if you fill them with air;make sure that all there is into your syringes is juice...not even an air bubble.

Fill them slowly,success every time...if you see juice coming out of the center posts,pull back some juice/air with the syringe,readjust it (the syringe--no air) and continue.

 

[wood]

3ml firebird w/king kong demo. Not my idea but my pics ;P

View attachment 111398
View attachment 111399
View attachment 111400

this is awesome , i love the 3ml , i have not been getting dry hits with the sleeve but i dont like the way it looks with it on so i have just been hitting it straight from the plastic tank , ive been trying to det a dt to stay some how but just couldnt , i was getting ready to rock the scotch tape thanks for this lol

 

[wood]

my flap doesnt open up , i used a really small needle to fill mine so there isnt a flap i used a tiny diabetic needle i grabbed a few at the pharmacy , i havent had the tiniest ammount of juice come out and ive ran about 3 tanks by now i dont know what your filling with but maybe the tip is a little too big

 

[northofamerica]

my flap doesnt open up , i used a really small needle to fill mine so there isnt a flap i used a tiny diabetic needle i grabbed a few at the pharmacy , i havent had the tiniest ammount of juice come out and ive ran about 3 tanks by now i dont know what your filling with but maybe the tip is a little too big

Yeah. The hole is too big now. I plugged the hole after a fill with a carto condom inside pin piece. I remember Mindfield using one to seal up the needle hole on one of his old ce2 juice bottle tank videos and found one in the junk drawer.

 

[martinc]

Daaarn....my beloved Vmax dead for about only 4 hrs...I miss it already. (fried switch?)

Anyways.

hat shows me how far we went along the APVs highway,I got nothing strong enugh to sustain my DiD or Scubagen,so i am back waaaaay down on SDs and extremevizions.

Hell,tought to myself,while being that low,why not drop all the way down...so its an extremevizion on a SD keyring

I would be content if the darn svoemesto dudes would finally step up the production...or the NGP dudes for that matter....but right now...bou-hou.

I think ima get a spare Vmax.