Older Folks and Vaping Front Porch - Part 2

[mekc57]

Thanks I'm sure it will have a learning curve just like the KFL's did when I started with them. I use cellucotton and by the looks of it it doesn't fluff up quite as good. I'm going to have to watch some more videos. Theres a lot not in English though.

It should work fine. Cellucotton is fluffy till you wet it down. You just don't want it shaped like a wick. The K4 Guru wicks the other way. He sets the wick up and wets it down before he puts the chamber ring on??? I never liked doing it that way. I alway seem to screw up the wick while screwing on the ring.
Here's my current build. You can see how much cottons in there and how full the chamber is.
compaired to the first one

 

[Semiretired]

I have no reply for that!!! Dumbfounded for sure!!!

I have definitely now heard of everything!

 

[mekc57]

I do like the K4 but for as big as it is, it doent hold much juice. I fill my Taifuns once a day but fill the K4 2-3 times a day. Looks cool. I like the top fill a lot and the ability to shut off the juice flow. Also getting to the build deck like the Taifun is a plus for sure. I don't remember how many times I had to use a syringe to suck out juice to work on the KFLs.

 

[FlamingoTutu]

Mike, can we get a link to the new thread? I don't want to get lost!

He hasn't opened the new thread yet. He's tempting fate. When ECF crashes next time, it will be because we went way over 15,000 posts.

 

[2legsshrt]

There is a new video on You Tube by Varos Vape that is pretty good. Brand new

 

[Kenna]

I like his videos. Been watching his Kayfun vids. he gives a lot of pertinent info.

 

[Wolfenstark]

Read about some people trimming the ends of the wicks - My ends at the time were all puffed up and not the easiest thing to do.

Have the ends thinner than the rest.

 

[Kenna]

75 more posts to go, i think I'm going to be snoozing when that 15000 hits!

 

[Iffy]

Hey Iffy, I'll see your mech mod, and add a Sigelei T-Max to the pot for the person making the 15,000th post.

Sweet! Besides one like da below (Sentinel M16 telescopic), I'll also 'toss' in a new Kick module...

 

[mekc57]

Read about some people trimming the ends of the wicks - My ends at the time were all puffed up and not the easiest thing to do.

Have the ends thinner than the rest.

You Have to do that with the Erlk in a drastic manner!

 

[mekc57]

There is a new video on You Tube by Varos Vape that is pretty good. Brand new

Yep, I need to watch that one. I saw it on the K4 thread but haven't taken the time to watch yet.

 

[FlamingoTutu]

Sweet! Besides one like da below (Sentinel M16 telescopic), I'll also 'toss' in a new Kick module...

You guys got serious about this in a hurry. Those are nice!

 

[FlamingoTutu]

Read about some people trimming the ends of the wicks - My ends at the time were all puffed up and not the easiest thing to do.

Have the ends thinner than the rest.

Nobody warned you about wicking with the afro cotton?

I see Australia isn't immune from terror threats once again. I hope every ends well for the hostages, not so much for the terrorist(s).

 

[2legsshrt]

I have one more question. When you are loosening the air screw will it stop on its own or just keep unscrewing till it comes out?

 

[Wolfenstark]

I have one more question. When you are loosening the air screw will it stop on its own or just keep unscrewing till it comes out?

on my ehpro KFL+ they came out - then went for a walk.

 

[Kenna]

Wolf, did you see the videos we posted for you?

 

[2legsshrt]

Well I think I figured that out since they have another air screw kit for people who want more air. Just wish our mail got here befor 5pm on Monday. Only got about 3 hours to play with it tomorrow. Night.

 

[Kenna]

I see all the EHPro Kayfuns. Anyone have a Tobeco?

 

[Wolfenstark]

Wolf, did you see the videos we posted for you?

Watching -

 

[Wolfenstark]

I see all the EHPro Kayfuns. Anyone have a Tobeco?

I have a tobeco - plume veil clone dripper which i guess does what its meant to - they have a K4 clone out.