Older Folks and Vaping Front Porch - Part Three

[Semiretired]

My 1st purchase was a pair of 510 Joye Tech cig-a-likes topped w/ 510 attys and cartridges.

Yep same here. I can remember when I used to believe that Joye Tech was going to be boss hog in the E-cig arena, but then they decided that they needed to make their stuff very proprietary and expensive - left them real quick, but I do give them full credit for getting me off the smokes...

 

[holimakaru]

OK, considering my previous 'age' statement, I recall recently buying spinner/twist eGos for a long time v-vert dat were 'bout $9 each. And no, can't 'member where (it t'was a $ale) since my ol' 'puter went down

Was it here?
Joyetech: Vapor Bank - Evansville, Indiana E-Cigarette Store

 

[clnire]

Welcome sanguine!! We don't check ID for age here, so pull up a rocker (or lounger) and have fun with the ole gang! If ya have any questions, this is a great place to ask cuz someone here knows the answer or where to steer you to get the answer!

 

[retired1]

Wait a minute. Who let the kids on the lawn?

 

[sanguinesolitude]

Welcome sanguine!! We don't check ID for age here, so pull up a rocker (or lounger) and have fun with the ole gang! If ya have any questions, this is a great place to ask cuz someone here knows the answer or where to steer you to get the answer!

will a beanbag chair work?

 

[garyoa1]

Beanbag? I kin get in one but I'd never get out agin. :/

 

[Iffy]

Was it here?
Joyetech: Vapor Bank - Evansville, Indiana E-Cigarette Store

Ummmm, don't think so. I'd have to 'dig' thru my CC account to be sure.

BTW, my first setup was an eGo and dose cursed Satan's spawn, cartridges; although, no mo 'bakky at dat point (50 months today)!

Thanx fer dat link!

I still introduce eGos to any possible v-vert.

 

[MikeE3]

Anyone else OCD about tracking their builds.

Topper Log as of 7/14/2015

R91 v1 - Pom - unused @ .93Ω, 5/30, Delasco
R91 v1#2 - JH - Provari - 1.7Ω, 2/24 Delasco
R91 v2 Nano - JH - istick - 1.16Ω, 7/14 Delasco
R91 v2 Nano - POM - SS Workhorse - 1.16Ω, 5/30, Delasco
R91 2.0 - JH - Workhorse - 1.1Ω, 6/25, Delasco

KFL - Pom Uma @ 1.2Ω 4/21 (5/3 ok)
KFL oem - JH - rDNA @ .14Ω 5/16 KGD
KFL V4 - JH - Nemi @1.2Ω 6/1 Delasco
KFL V4 - Pom - SS Poldiac @1.1Ω 7/2 Delasco
KFL V4 oem - JH -Provari P3 @ 1.43 7/11Delasco

Taifun - POM - Provari-mini, 1.3 ohms, 2/16 Delasco
Taifun2 - Pom - WrkTele - 1.13Ω, 4/31 (or 3/31???)
"
Gkmf/Super-T - JH - 1.07 ohms(Mike), 2/16 Delasco

================================
ErlPrinz (new 5/29/15)

5/29
1st: 28g, 7x, 2.5mm @1.37Ω, Delasco
5/30 new coil
28g, 8x, 2.0mm @ 1.28 ,Delasco, JH

5/29
2nd: 28g, 7x, 2.0mm @1.01Ω, Delasco, POM
6/20, new Delasco

================================
Ego-One on eVic VT
7/10 - new .2Ω Nickel Coil

================================
Janet’s toppers
(temp: 6/21 - blue moved to pink stick)

kayfun Nano - Janet- JH - iStick-pink 1.3Ω, 7/11
9/6 - new coil
28g, 9 wraps, 2mm @ 1.36 ohms, KGD
9/11 - new KGD
9/30 - new KGD
10/18, dry burn reused KGD
12/12, new KGD
2/1, new Delasco
2/28, new Delasco (lots of gunk, so spaced the coil)
3/28, new Delasco
4/21, new Delasco
5/14, new Delasco, iStick reading 1.5Ω30g, 7x spaced, 2mm, 1.7Ω
6/1, new Delasco, meter=1.45
6/19, new Delasco
7/11, new Delasco

Kayfun Nano - Janet- POM, Provari - 1.7Ω, 7/14
10/7 new coil / KGD
30g, 8x, 2mm, 1.9Ω
10/13 new KGD
11/1 new KGD
12/12 new KGD
1/12 new coil, Delasco
30g, 7x spaced, 2mm, 1.66Ω
2/1, new Delasco
2/28, new coil, Delasco
30g, 7x spaced, 2mm, 1.7Ω
3/30, new Delasco
4/20, new Delasco
5/3, new coil
30g, 7x spaced, 2mm, 1.68Ω, Delasco
6/1, new Delasco
6/19, new Delasco
6/25, new Delasco
7/9, new Delasco
7/14, new Delasco

KFL-Nano - Janet- BB, Mvp @ 1.46Ω, 7/9
3/20 - 1st coil
28g, 6x, 2.5mm, spaced, 1.12Ω
last used @ 1.12Ω 3/20 Delasco
4/8 coil ok, wick turning)
moved to Janet’s inventory - 5/24
5/24 new coil
28g, 8x, 2.5mm, spaced, 1.46Ω
6/1, new Delasco
7/9, new Delasco
Gs-Air (new 5/26)
================================
air-M - POM 5/26

air-MS - JH 5/26

================================
drippers
CTL-slv - JH 10 - .74Ω
10/7 - Dual coil, 28g, 10x, 2mm, .74Ωs
ea coil ~ 1.5Ω, 1cm KGD
12/5 - rebuilt w/ Nickel
3mm, 10wraps, twisted 32, .29Ω
12/7, 8 wraps, twisted now @ .21Ω

CTL-blk - POM 10 - .45Ω
10/7 - Dual coil, 28g, 6x, 2mm, .45Ωs
ea coil ~.1Ω, 1cm KGD

Sub#1 - Janet - JH
2/7 - std head,
30g, 5x, 2.5mm, 1.76 ohms, KGD

Sub#2 - Mike - Pom
2/8 - RBA head
30g, 6x?, 2mm, 1.56 ohms, KGD

================================

Taifun - POM - 1.3 ohms
28g, 2mm, 9 wraps spaced
8/9 wicked w/ KGD
8/10 re-wicked w/ more KGD was leaking
8/15 still flooding, re-wicked w/ KGD @ 10mm strip
8/16 - added some KGD at the ports to
Cut down on flooding out air hole
9/13 new KGD cut flush - no leaking so far (9/16)
11/18 new KGD
2/16, new Delasco

Taifun2 - Pom - WrkTele - 1.13Ω
4/31 - 28g, 2.5mm, 5x 1.13Ω <— 4/31 or 3/31???

KFL - Pom - Uma @ 1.2Ω
3/25 - 1st coil
28g, 6x, 2mm spaced, 1.2Ω
4/21, new Delasco
5/3, still looking good

KFL - JH - rDNA @ .14Ω
5/1 - 1st nickel build
28g nickel, 9x, 3mm @ .14Ω, KGD wick
5/16 - new KGD - lightly gunked, dark wick
(turned off temp, 2 light burns at 14 watts)

KFL V4 - JH - Nemi @1.2Ω
5/22 - new coil
28g, 6x, 2.5mm @1.2Ω Delasco
5/28 - new Delasco
6/1, new Delasco

KFL V4 - Pom - SS Poldiac @1.1Ω
7/2 - new coil
28g, 6x, 2.5mm @1.1Ω Delasco

KFL V4 oem - P3 - JH, @ 1.43 7/11Delasco
6/13 1st coil
28g, 7x, 2.5mm @ 1.43 Delasco
6/20, new Delasco
6/25, new Delasco
7/11, new Delasco

================================

R91 v1 - Pom - unused - @ .93Ω
XC-116 & 28g 7 wraps 3mm @ 1.5Ω
9/4 new coil 28g 8 wraps 1.5mm @ 1.0Ω
9/19 - new KGD wick
10/11, new KGD
Leaking
11/1 new Coil
28g, 7x spaced, 2mm, 1.07Ω, KGD
11/15 - still leaking, tightened block
Wick dis colored but coil not gunked - nice
New KGD wick
11/24, new KGD
12/1, new KGD
12/6, new Delasco
12/12, new Delasco
12/19 new coil
28g, 7x spaced, 2mm, 1.05Ω, Delasco
12/24, new Delasco, 1 piece, left some shoulder
1/12, as above, coil was black no gunk build up
(1/16, check coil, like new yet)
(1/19, coil still looking good, rebuilt anyway)
1/19 new wick & coil - Delasco
5x twisted 30g, spaced, 2.5mm @ .93Ω
2/16, new Delasco
2/24, new Delasco
3/15, new Delasco
4/23, new Delasco
5/6, new Delasco
5/30, new Delasco

R91 v1#2 - JH - Provari - 1.7ohms
8/20, 26g 6wraps 2mm .54 ohms KGD
10/13, 30g, 7x, 2mm, 1.7 ohms, KGD
10/8, new KGD
12/24, space the coil, new Delasco w/ shoulders
(9/1, coil is black but no gunk)
1/16, new Delasco
2/8, new Delasco
2/24, new Delasco (could use a new coil)
R91 v2 Nano - JH - iStick - 1.15Ω
6x 28g @ 1.2o 2.3mm (
7/3 - dry burn coil, torch wick
7/10 - dry burn to change flav
7/17 - dry burn, re-wick w/ melatonin
7/26 - new coil/wick
28g, 5 wraps, 2mm, .85 ohms, Melatonin
7/27 - bunked coil after 3 tanks
Used "just enough" for new wick
And cut 1/2 the ends off
7/28 - new CC wick, ~1/3 of rope
8/1, new CC wick, 1/2 old one was turning color
Coil had a little build up
8/7, coil had mild build up/wick was that funky color
re-wicked w/ KGD
8/12 - Dry Burn, new KGD wick
8/24 - new coil/wick
28g, 6 wraps, 2mm, ~.8 ohms
as much CC as I could, trimmed tails to point
8/25 re wicked w/ KGD, maybe too much CC
was getting burnt hits, 1 tank coil gunking but wick looked good
8/30 new KGD wick - dry hits with old one, tails maybe too thin
1cm not trimmed, was tight in 2mm coil
9/8 - new KGD
9/11 - new coil (old coil was actually 1.5mm)
28g, 7 wraps, 2mm, 1.06 ohms, KGD
9/21, new KGD
9/24, new KGD
9/30, new KKD
10/4, new KGD (early just because)
10/11, new KGD
10/18, new Delasco
10/26 new Delasco
10/29 new coil
28g, 7x, 1.06 ohms, KGD wick
11/7 new KGD
(1 dry hit - burn wick - duh!)
11/8 new KGD - bow tie, trim ≈½ tails
11/10 new KGD, full tails (was getting dry hits)
.... 11/19 new coil
Twisted 32g, 5 spaced wraps, 2mm, 1.15Ω
12/1, new KGD
1/9, new KGD (1/16, coil still clean)
2/14, new Delasco
3/6, new coil
28g, 5x, 2.5mm, 1.1Ω, Delasco
3/20 - new Delasco
4/9 - new Delasco
4/23 - new coil
28g, 2.5mm, 6x, 1.16Ω, Delasco
5/3, new Delasco
6/9, new Delasco
7/14, new Delasco
R91 v2 Nano - POM - SS Workhorse - 1.13Ω
4/9 - New coil, 8x 26g 2.5mm .9o
FD block, no side holes
6/3 new coil 7x 28g 2.3mm 1.3o
(2 wraps tape in post = 2.3mm)
(6x of 28g on 2.3mm = 1.14o
6/4 - cleaned, 7/3 new wick
7/6 - dry burn was tasting burnt
7/20 - dry burn, re-wick w/ Melatonin
7/23 - re-wicked
7/26 - new coil & melatonin wic
28g, 6 wraps, 2mm, 1.01 ohms
7/28 - new CC wick, ~1/3 of rope
8/1, very light coil build up, wick looked great
8/4, coil still looking decent, not much change
8/12, coil still decent
8/18 gunked bad, dry burn new KGD wick
8/22 new KGD 2x coil, wasn't bad but slight yuck taste
9/3 new coil & KGD 8+mm
28g 6 wraps @ .96 ohms
9/8 new KGD
9/21 new KGD
9/24 new KGD
9/30 new coil/wick
28g, 6x, 2mm, .96Ωs
10/4, new KGD (early just because)
10/8, new KGD
10/18, new Delasco
10/22, re-wicked Delasco,
Not leaking
10/29 new coil
28g, 7x, 1.08 ohms, KGD wick
11/7, new KGD
11/15, new KGD
11/24, new KGD
12/12, new Delasco
12/19, new Delasco 2x 20cm double insertion
12/24, new Delasco, 1 piece trimmed close to coil
12/30 New Coil
(7x, 28g, 2.5mm, 1.3Ω)
6x, 28g, spaced, 2.5mm, 1.13Ω, Delasco
1/16 coil still clean, re wicked Delasco,
2/9, new Delasco
2/23, new Delasco
3/21, new Delasco
4/8, new Delasco
4/20, new Delasco
5/3, new coil
28g, 6x, 2.5mm, 1.16Ω, Delasco
5/30, new Delasco
6/25, new Delasco

R91-2.0 - JH - Workhorse @ 1.16Ω
1/7 - 28g, 7x spaced, 2mm, 1.17, KGD
1/28, new Rayon
2/8, new Delasco
2/15, new Delasco
2/23, new Delasco
3/7 new coil
28g, 6x, 2.5mm, spaced, 1.1Ω, Delasco
3/22, new Delasco
4/10, new Delasco
4/21, new Delasco
5/30, new Delasco

================================

Gkmf/Super-T - JH - 1.07 ohms(Mike)
9x 26g w/ ReadyX
7/3 cleaned
8/3 re-wicked w/ CC ~1/2 width
Coil ID btw 2-2.5mm
8/9 new wick KGD
(Previous wick gunked just in the middle)
(Was OK for another day maybe)
8/18 - New KGD wick
8/27 - new coil / wick
28g. 6 open wraps, 2.5mm @ 1.07 ohms
9/3 new KGD @ 1cm
9/12 new KGD
1/9 rinsed clean w/ Everclear
2/16, dry burn, re-wicked w/ Delasco
just twisted and pushed it through w/ a pin - neat

Gkmf/Super-T - JH - 1.6Ω (Janet)
8/28 - 30g. 6 open wraps, 2.5mm @ 1.6Ωs, KGD
9/19 - new KGD wick. juice was dark but coil was fine

F20-350 - JH - 1.20hms
7/26, 28g 8 wraps, 2.5mm @1.2ohms, CC
8/1, coil needed cleaning, new CC wick
8/6, coil gunked on back, stretched coil, new CC wick
9/13 new KGD

F20-490 - Pom -1.1 ohms
8/10 28g, 7 wraps, 2mm, 1.1 ohms, KGD
8/14, new CC wick
9/12 new KGD
9/21 - adjusted post down for better batt contact

================================

ZAP - JH 2.0 ohms
8/13, 28g, 2mm, 10 wraps, 1.7 ohms, CC
9/6, 30g 6 open wraps 2.0 ohms KGD

iGo-#1 - 1.1Ω
8/8 28, 2mm, 8 wraps @1.1Ω
Rayon Wick

Go-#2 - .6Ω
8/12 26, 2mm, 6 wraps @ .6Ω
Rayon Wick

iGo- #1 & #2 rebuilt for DNA40
11/19:
2.5mm ID 12x NI200, 28g=.15Ω, 30g=.22Ω

iGo-Janet - shorty smoke - 1.56Ω
8/8 28g, 2mm, 9wraps @1.5Ω
Rayon Wick

Nautilus - JH
New 6/27, new 7/6, new 9/26 1.8 Bvc
II iClear - POM
New 6/29

DID - ??? - smoke tip - 1.0o
DID Temon - ??? - 1.0o
DID mini - ??? - 1.0o
Cobra - ??? - 1.5o
ZAP - Org/Virginia - 1.7o
5/22 cleaned


Davides
White Tip - Janet's Heaven,
Jan 6, Jan 25, Feb 5, Mar 1
Mar 24, Apr 11, May 5, Jun 2
Black Tip - pomegranate,
Jan 6, Jan 31, Mar 1, Mar 24,
Apr 11, May 4, , Jun 2
Chrome Smooth - Orange Dream
Feb 8, Mar 1
Chrome Groove - USA Blend
Mar 1

 

[clnire]

will a beanbag chair work?

Definitely!, but most of us could not get back out....

 

[2legsshrt]

Anyone else OCD about tracking their builds.

Topper Log as of 7/14/2015

R91 v1 - Pom - unused @ .93Ω, 5/30, Delasco
R91 v1#2 - JH - Provari - 1.7Ω, 2/24 Delasco
R91 v2 Nano - JH - iStick - 1.16Ω, 7/14 Delasco
R91 v2 Nano - POM - SS Workhorse - 1.16Ω, 5/30, Delasco
R91 2.0 - JH - Workhorse - 1.1Ω, 6/25, Delasco

KFL - Pom Uma @ 1.2Ω 4/21 (5/3 ok)
KFL oem - JH - rDNA @ .14Ω 5/16 KGD
KFL V4 - JH - Nemi @1.2Ω 6/1 Delasco
KFL V4 - Pom - SS Poldiac @1.1Ω 7/2 Delasco
KFL V4 oem - JH -Provari P3 @ 1.43 7/11Delasco

Taifun - POM - Provari-mini, 1.3 ohms, 2/16 Delasco
Taifun2 - Pom - WrkTele - 1.13Ω, 4/31 (or 3/31???)
"
Gkmf/Super-T - JH - 1.07 ohms(Mike), 2/16 Delasco

================================
ErlPrinz (new 5/29/15)

5/29
1st: 28g, 7x, 2.5mm @1.37Ω, Delasco
5/30 new coil
28g, 8x, 2.0mm @ 1.28 ,Delasco, JH

5/29
2nd: 28g, 7x, 2.0mm @1.01Ω, Delasco, POM
6/20, new Delasco

================================
Ego-One on eVic VT
7/10 - new .2Ω Nickel Coil

================================
Janet’s toppers
(temp: 6/21 - blue moved to pink stick)

Kayfun Nano - Janet- JH - iStick-pink 1.3Ω, 7/11
9/6 - new coil
28g, 9 wraps, 2mm @ 1.36 ohms, KGD
9/11 - new KGD
9/30 - new KGD
10/18, dry burn reused KGD
12/12, new KGD
2/1, new Delasco
2/28, new Delasco (lots of gunk, so spaced the coil)
3/28, new Delasco
4/21, new Delasco
5/14, new Delasco, iStick reading 1.5Ω30g, 7x spaced, 2mm, 1.7Ω
6/1, new Delasco, meter=1.45
6/19, new Delasco
7/11, new Delasco

Kayfun Nano - Janet- POM, Provari - 1.7Ω, 7/14
10/7 new coil / KGD
30g, 8x, 2mm, 1.9Ω
10/13 new KGD
11/1 new KGD
12/12 new KGD
1/12 new coil, Delasco
30g, 7x spaced, 2mm, 1.66Ω
2/1, new Delasco
2/28, new coil, Delasco
30g, 7x spaced, 2mm, 1.7Ω
3/30, new Delasco
4/20, new Delasco
5/3, new coil
30g, 7x spaced, 2mm, 1.68Ω, Delasco
6/1, new Delasco
6/19, new Delasco
6/25, new Delasco
7/9, new Delasco
7/14, new Delasco

KFL-Nano - Janet- BB, Mvp @ 1.46Ω, 7/9
3/20 - 1st coil
28g, 6x, 2.5mm, spaced, 1.12Ω
last used @ 1.12Ω 3/20 Delasco
4/8 coil ok, wick turning)
moved to Janet’s inventory - 5/24
5/24 new coil
28g, 8x, 2.5mm, spaced, 1.46Ω
6/1, new Delasco
7/9, new Delasco
Gs-Air (new 5/26)
================================
air-M - POM 5/26

air-MS - JH 5/26

================================
drippers
CTL-slv - JH 10 - .74Ω
10/7 - Dual coil, 28g, 10x, 2mm, .74Ωs
ea coil ~ 1.5Ω, 1cm KGD
12/5 - rebuilt w/ Nickel
3mm, 10wraps, twisted 32, .29Ω
12/7, 8 wraps, twisted now @ .21Ω

CTL-blk - POM 10 - .45Ω
10/7 - Dual coil, 28g, 6x, 2mm, .45Ωs
ea coil ~.1Ω, 1cm KGD

Sub#1 - Janet - JH
2/7 - std head,
30g, 5x, 2.5mm, 1.76 ohms, KGD

Sub#2 - Mike - Pom
2/8 - RBA head
30g, 6x?, 2mm, 1.56 ohms, KGD

================================

Taifun - POM - 1.3 ohms
28g, 2mm, 9 wraps spaced
8/9 wicked w/ KGD
8/10 re-wicked w/ more KGD was leaking
8/15 still flooding, re-wicked w/ KGD @ 10mm strip
8/16 - added some KGD at the ports to
Cut down on flooding out air hole
9/13 new KGD cut flush - no leaking so far (9/16)
11/18 new KGD
2/16, new Delasco

Taifun2 - Pom - WrkTele - 1.13Ω
4/31 - 28g, 2.5mm, 5x 1.13Ω <— 4/31 or 3/31???

KFL - Pom - Uma @ 1.2Ω
3/25 - 1st coil
28g, 6x, 2mm spaced, 1.2Ω
4/21, new Delasco
5/3, still looking good

KFL - JH - rDNA @ .14Ω
5/1 - 1st nickel build
28g nickel, 9x, 3mm @ .14Ω, KGD wick
5/16 - new KGD - lightly gunked, dark wick
(turned off temp, 2 light burns at 14 watts)

KFL V4 - JH - Nemi @1.2Ω
5/22 - new coil
28g, 6x, 2.5mm @1.2Ω Delasco
5/28 - new Delasco
6/1, new Delasco

KFL V4 - Pom - SS Poldiac @1.1Ω
7/2 - new coil
28g, 6x, 2.5mm @1.1Ω Delasco

KFL V4 oem - P3 - JH, @ 1.43 7/11Delasco
6/13 1st coil
28g, 7x, 2.5mm @ 1.43 Delasco
6/20, new Delasco
6/25, new Delasco
7/11, new Delasco

================================

R91 v1 - Pom - unused - @ .93Ω
XC-116 & 28g 7 wraps 3mm @ 1.5Ω
9/4 new coil 28g 8 wraps 1.5mm @ 1.0Ω
9/19 - new KGD wick
10/11, new KGD
Leaking
11/1 new Coil
28g, 7x spaced, 2mm, 1.07Ω, KGD
11/15 - still leaking, tightened block
Wick dis colored but coil not gunked - nice
New KGD wick
11/24, new KGD
12/1, new KGD
12/6, new Delasco
12/12, new Delasco
12/19 new coil
28g, 7x spaced, 2mm, 1.05Ω, Delasco
12/24, new Delasco, 1 piece, left some shoulder
1/12, as above, coil was black no gunk build up
(1/16, check coil, like new yet)
(1/19, coil still looking good, rebuilt anyway)
1/19 new wick & coil - Delasco
5x twisted 30g, spaced, 2.5mm @ .93Ω
2/16, new Delasco
2/24, new Delasco
3/15, new Delasco
4/23, new Delasco
5/6, new Delasco
5/30, new Delasco

R91 v1#2 - JH - Provari - 1.7ohms
8/20, 26g 6wraps 2mm .54 ohms KGD
10/13, 30g, 7x, 2mm, 1.7 ohms, KGD
10/8, new KGD
12/24, space the coil, new Delasco w/ shoulders
(9/1, coil is black but no gunk)
1/16, new Delasco
2/8, new Delasco
2/24, new Delasco (could use a new coil)
R91 v2 Nano - JH - iStick - 1.15Ω
6x 28g @ 1.2o 2.3mm (
7/3 - dry burn coil, torch wick
7/10 - dry burn to change flav
7/17 - dry burn, re-wick w/ melatonin
7/26 - new coil/wick
28g, 5 wraps, 2mm, .85 ohms, Melatonin
7/27 - bunked coil after 3 tanks
Used "just enough" for new wick
And cut 1/2 the ends off
7/28 - new CC wick, ~1/3 of rope
8/1, new CC wick, 1/2 old one was turning color
Coil had a little build up
8/7, coil had mild build up/wick was that funky color
re-wicked w/ KGD
8/12 - Dry Burn, new KGD wick
8/24 - new coil/wick
28g, 6 wraps, 2mm, ~.8 ohms
as much CC as I could, trimmed tails to point
8/25 re wicked w/ KGD, maybe too much CC
was getting burnt hits, 1 tank coil gunking but wick looked good
8/30 new KGD wick - dry hits with old one, tails maybe too thin
1cm not trimmed, was tight in 2mm coil
9/8 - new KGD
9/11 - new coil (old coil was actually 1.5mm)
28g, 7 wraps, 2mm, 1.06 ohms, KGD
9/21, new KGD
9/24, new KGD
9/30, new KKD
10/4, new KGD (early just because)
10/11, new KGD
10/18, new Delasco
10/26 new Delasco
10/29 new coil
28g, 7x, 1.06 ohms, KGD wick
11/7 new KGD
(1 dry hit - burn wick - duh!)
11/8 new KGD - bow tie, trim ≈½ tails
11/10 new KGD, full tails (was getting dry hits)
.... 11/19 new coil
Twisted 32g, 5 spaced wraps, 2mm, 1.15Ω
12/1, new KGD
1/9, new KGD (1/16, coil still clean)
2/14, new Delasco
3/6, new coil
28g, 5x, 2.5mm, 1.1Ω, Delasco
3/20 - new Delasco
4/9 - new Delasco
4/23 - new coil
28g, 2.5mm, 6x, 1.16Ω, Delasco
5/3, new Delasco
6/9, new Delasco
7/14, new Delasco
R91 v2 Nano - POM - SS Workhorse - 1.13Ω
4/9 - New coil, 8x 26g 2.5mm .9o
FD block, no side holes
6/3 new coil 7x 28g 2.3mm 1.3o
(2 wraps tape in post = 2.3mm)
(6x of 28g on 2.3mm = 1.14o
6/4 - cleaned, 7/3 new wick
7/6 - dry burn was tasting burnt
7/20 - dry burn, re-wick w/ Melatonin
7/23 - re-wicked
7/26 - new coil & melatonin wic
28g, 6 wraps, 2mm, 1.01 ohms
7/28 - new CC wick, ~1/3 of rope
8/1, very light coil build up, wick looked great
8/4, coil still looking decent, not much change
8/12, coil still decent
8/18 gunked bad, dry burn new KGD wick
8/22 new KGD 2x coil, wasn't bad but slight yuck taste
9/3 new coil & KGD 8+mm
28g 6 wraps @ .96 ohms
9/8 new KGD
9/21 new KGD
9/24 new KGD
9/30 new coil/wick
28g, 6x, 2mm, .96Ωs
10/4, new KGD (early just because)
10/8, new KGD
10/18, new Delasco
10/22, re-wicked Delasco,
Not leaking
10/29 new coil
28g, 7x, 1.08 ohms, KGD wick
11/7, new KGD
11/15, new KGD
11/24, new KGD
12/12, new Delasco
12/19, new Delasco 2x 20cm double insertion
12/24, new Delasco, 1 piece trimmed close to coil
12/30 New Coil
(7x, 28g, 2.5mm, 1.3Ω)
6x, 28g, spaced, 2.5mm, 1.13Ω, Delasco
1/16 coil still clean, re wicked Delasco,
2/9, new Delasco
2/23, new Delasco
3/21, new Delasco
4/8, new Delasco
4/20, new Delasco
5/3, new coil
28g, 6x, 2.5mm, 1.16Ω, Delasco
5/30, new Delasco
6/25, new Delasco

R91-2.0 - JH - Workhorse @ 1.16Ω
1/7 - 28g, 7x spaced, 2mm, 1.17, KGD
1/28, new Rayon
2/8, new Delasco
2/15, new Delasco
2/23, new Delasco
3/7 new coil
28g, 6x, 2.5mm, spaced, 1.1Ω, Delasco
3/22, new Delasco
4/10, new Delasco
4/21, new Delasco
5/30, new Delasco

================================

Gkmf/Super-T - JH - 1.07 ohms(Mike)
9x 26g w/ ReadyX
7/3 cleaned
8/3 re-wicked w/ CC ~1/2 width
Coil ID btw 2-2.5mm
8/9 new wick KGD
(Previous wick gunked just in the middle)
(Was OK for another day maybe)
8/18 - New KGD wick
8/27 - new coil / wick
28g. 6 open wraps, 2.5mm @ 1.07 ohms
9/3 new KGD @ 1cm
9/12 new KGD
1/9 rinsed clean w/ Everclear
2/16, dry burn, re-wicked w/ Delasco
just twisted and pushed it through w/ a pin - neat

Gkmf/Super-T - JH - 1.6Ω (Janet)
8/28 - 30g. 6 open wraps, 2.5mm @ 1.6Ωs, KGD
9/19 - new KGD wick. juice was dark but coil was fine

F20-350 - JH - 1.20hms
7/26, 28g 8 wraps, 2.5mm @1.2ohms, CC
8/1, coil needed cleaning, new CC wick
8/6, coil gunked on back, stretched coil, new CC wick
9/13 new KGD

F20-490 - Pom -1.1 ohms
8/10 28g, 7 wraps, 2mm, 1.1 ohms, KGD
8/14, new CC wick
9/12 new KGD
9/21 - adjusted post down for better batt contact

================================

ZAP - JH 2.0 ohms
8/13, 28g, 2mm, 10 wraps, 1.7 ohms, CC
9/6, 30g 6 open wraps 2.0 ohms KGD

iGo-#1 - 1.1Ω
8/8 28, 2mm, 8 wraps @1.1Ω
Rayon Wick

Go-#2 - .6Ω
8/12 26, 2mm, 6 wraps @ .6Ω
Rayon Wick

iGo- #1 & #2 rebuilt for DNA40
11/19:
2.5mm ID 12x NI200, 28g=.15Ω, 30g=.22Ω

iGo-Janet - shorty smoke - 1.56Ω
8/8 28g, 2mm, 9wraps @1.5Ω
Rayon Wick

Nautilus - JH
New 6/27, new 7/6, new 9/26 1.8 Bvc
II iClear - POM
New 6/29

DID - ??? - smoke tip - 1.0o
DID Temon - ??? - 1.0o
DID mini - ??? - 1.0o
Cobra - ??? - 1.5o
ZAP - Org/Virginia - 1.7o
5/22 cleaned


Davides
White Tip - Janet's Heaven,
Jan 6, Jan 25, Feb 5, Mar 1
Mar 24, Apr 11, May 5, Jun 2
Black Tip - pomegranate,
Jan 6, Jan 31, Mar 1, Mar 24,
Apr 11, May 4, , Jun 2
Chrome Smooth - Orange Dream
Feb 8, Mar 1
Chrome Groove - USA Blend
Mar 1

Is that all. I'm getting pretty slim on stuff now. 3 SXmini M's 1 SXmini S 9 Kanger STM and a Tugboat V2. Oh and 4 Nautilus's not in use. Lot's of wire will be trying Ti in 2 days now if YiHi would get off their butts and fix the Ti firmware they put out. Kind of unstable from what I hear. Better vaping the Ti on the nickel firmware at 280 but supposed to last like kanthal. Will keep you updated. Oh and I still have 3 Provari's. Everything is on nickel except 1 on my S. The nickel coils are lasting about 15 days using 3 M's

 

[2legsshrt]

MFS has a sale on unflavored nic 20% off till the 20th. That's where I get mine and might get a couple more. I like the 100mg 125ml comes in glass and bubble wrapped and with the sale $14.40 and in a 50/50 base.

 

[DavidOck]

Why buy an ego spinner for $29 when you can get an istick30 for the same money?
One reason simpler to use.

Another reason could be the form factor.

Was it here?
Joyetech: Vapor Bank - Evansville, Indiana E-Cigarette Store

I've ordered from them a few times, and never had anything but fast and accurate results. They run what they call a seasonal sale, so sometime during each season... no regular schedule on the big sale other than that.

will a beanbag chair work?

As long as they're not refried.

Beanbag? I kin get in one but I'd never get out agin. :/

Nah, easy. You're already close to the ground, just roll out.

Getting up off the floor, now...

 

[Debadoo]

As long as they're not refried.

 

[FlamingoTutu]

Before I even begin to try to catch up, I want you to know Deb, I'm very grateful for your updates on Dancing. I feel terrible for her. If they didn't get the stent into my shoulder, and they barely got it in there, my only other option was having my chest cracked. I was terrified. My father's had his cracked and is still steaming along doing very for his age and condition. Please let her know I'm thinking about her a lot and hoping for a speedy recovery.

Also Deb, major HAPPY BIRTHDAY to you!!!!

Hope you have more fun than that though. Maybe this will make you smile.

Um, okay, maybe this.

Anyone else OCD about tracking their builds.

Topper Log as of 7/14/2015

R91 v1 - Pom - unused @ .93Ω, 5/30, Delasco
R91 v1#2 - JH - Provari - 1.7Ω, 2/24 Delasco
R91 v2 Nano - JH - iStick - 1.16Ω, 7/14 Delasco
R91 v2 Nano - POM - SS Workhorse - 1.16Ω, 5/30, Delasco
R91 2.0 - JH - Workhorse - 1.1Ω, 6/25, Delasco

KFL - Pom Uma @ 1.2Ω 4/21 (5/3 ok)
KFL oem - JH - rDNA @ .14Ω 5/16 KGD
KFL V4 - JH - Nemi @1.2Ω 6/1 Delasco
KFL V4 - Pom - SS Poldiac @1.1Ω 7/2 Delasco
KFL V4 oem - JH -Provari P3 @ 1.43 7/11Delasco

Taifun - POM - Provari-mini, 1.3 ohms, 2/16 Delasco
Taifun2 - Pom - WrkTele - 1.13Ω, 4/31 (or 3/31???)
"
Gkmf/Super-T - JH - 1.07 ohms(Mike), 2/16 Delasco

================================
ErlPrinz (new 5/29/15)

5/29
1st: 28g, 7x, 2.5mm @1.37Ω, Delasco
5/30 new coil
28g, 8x, 2.0mm @ 1.28 ,Delasco, JH

5/29
2nd: 28g, 7x, 2.0mm @1.01Ω, Delasco, POM
6/20, new Delasco

================================
Ego-One on eVic VT
7/10 - new .2Ω Nickel Coil

================================
Janet’s toppers
(temp: 6/21 - blue moved to pink stick)

Kayfun Nano - Janet- JH - iStick-pink 1.3Ω, 7/11
9/6 - new coil
28g, 9 wraps, 2mm @ 1.36 ohms, KGD
9/11 - new KGD
9/30 - new KGD
10/18, dry burn reused KGD
12/12, new KGD
2/1, new Delasco
2/28, new Delasco (lots of gunk, so spaced the coil)
3/28, new Delasco
4/21, new Delasco
5/14, new Delasco, iStick reading 1.5Ω30g, 7x spaced, 2mm, 1.7Ω
6/1, new Delasco, meter=1.45
6/19, new Delasco
7/11, new Delasco

Kayfun Nano - Janet- POM, Provari - 1.7Ω, 7/14
10/7 new coil / KGD
30g, 8x, 2mm, 1.9Ω
10/13 new KGD
11/1 new KGD
12/12 new KGD
1/12 new coil, Delasco
30g, 7x spaced, 2mm, 1.66Ω
2/1, new Delasco
2/28, new coil, Delasco
30g, 7x spaced, 2mm, 1.7Ω
3/30, new Delasco
4/20, new Delasco
5/3, new coil
30g, 7x spaced, 2mm, 1.68Ω, Delasco
6/1, new Delasco
6/19, new Delasco
6/25, new Delasco
7/9, new Delasco
7/14, new Delasco

KFL-Nano - Janet- BB, Mvp @ 1.46Ω, 7/9
3/20 - 1st coil
28g, 6x, 2.5mm, spaced, 1.12Ω
last used @ 1.12Ω 3/20 Delasco
4/8 coil ok, wick turning)
moved to Janet’s inventory - 5/24
5/24 new coil
28g, 8x, 2.5mm, spaced, 1.46Ω
6/1, new Delasco
7/9, new Delasco
Gs-Air (new 5/26)
================================
air-M - POM 5/26

air-MS - JH 5/26

================================
drippers
CTL-slv - JH 10 - .74Ω
10/7 - Dual coil, 28g, 10x, 2mm, .74Ωs
ea coil ~ 1.5Ω, 1cm KGD
12/5 - rebuilt w/ Nickel
3mm, 10wraps, twisted 32, .29Ω
12/7, 8 wraps, twisted now @ .21Ω

CTL-blk - POM 10 - .45Ω
10/7 - Dual coil, 28g, 6x, 2mm, .45Ωs
ea coil ~.1Ω, 1cm KGD

Sub#1 - Janet - JH
2/7 - std head,
30g, 5x, 2.5mm, 1.76 ohms, KGD

Sub#2 - Mike - Pom
2/8 - RBA head
30g, 6x?, 2mm, 1.56 ohms, KGD

================================

Taifun - POM - 1.3 ohms
28g, 2mm, 9 wraps spaced
8/9 wicked w/ KGD
8/10 re-wicked w/ more KGD was leaking
8/15 still flooding, re-wicked w/ KGD @ 10mm strip
8/16 - added some KGD at the ports to
Cut down on flooding out air hole
9/13 new KGD cut flush - no leaking so far (9/16)
11/18 new KGD
2/16, new Delasco

Taifun2 - Pom - WrkTele - 1.13Ω
4/31 - 28g, 2.5mm, 5x 1.13Ω <— 4/31 or 3/31???

KFL - Pom - Uma @ 1.2Ω
3/25 - 1st coil
28g, 6x, 2mm spaced, 1.2Ω
4/21, new Delasco
5/3, still looking good

KFL - JH - rDNA @ .14Ω
5/1 - 1st nickel build
28g nickel, 9x, 3mm @ .14Ω, KGD wick
5/16 - new KGD - lightly gunked, dark wick
(turned off temp, 2 light burns at 14 watts)

KFL V4 - JH - Nemi @1.2Ω
5/22 - new coil
28g, 6x, 2.5mm @1.2Ω Delasco
5/28 - new Delasco
6/1, new Delasco

KFL V4 - Pom - SS Poldiac @1.1Ω
7/2 - new coil
28g, 6x, 2.5mm @1.1Ω Delasco

KFL V4 oem - P3 - JH, @ 1.43 7/11Delasco
6/13 1st coil
28g, 7x, 2.5mm @ 1.43 Delasco
6/20, new Delasco
6/25, new Delasco
7/11, new Delasco

================================

R91 v1 - Pom - unused - @ .93Ω
XC-116 & 28g 7 wraps 3mm @ 1.5Ω
9/4 new coil 28g 8 wraps 1.5mm @ 1.0Ω
9/19 - new KGD wick
10/11, new KGD
Leaking
11/1 new Coil
28g, 7x spaced, 2mm, 1.07Ω, KGD
11/15 - still leaking, tightened block
Wick dis colored but coil not gunked - nice
New KGD wick
11/24, new KGD
12/1, new KGD
12/6, new Delasco
12/12, new Delasco
12/19 new coil
28g, 7x spaced, 2mm, 1.05Ω, Delasco
12/24, new Delasco, 1 piece, left some shoulder
1/12, as above, coil was black no gunk build up
(1/16, check coil, like new yet)
(1/19, coil still looking good, rebuilt anyway)
1/19 new wick & coil - Delasco
5x twisted 30g, spaced, 2.5mm @ .93Ω
2/16, new Delasco
2/24, new Delasco
3/15, new Delasco
4/23, new Delasco
5/6, new Delasco
5/30, new Delasco

R91 v1#2 - JH - Provari - 1.7ohms
8/20, 26g 6wraps 2mm .54 ohms KGD
10/13, 30g, 7x, 2mm, 1.7 ohms, KGD
10/8, new KGD
12/24, space the coil, new Delasco w/ shoulders
(9/1, coil is black but no gunk)
1/16, new Delasco
2/8, new Delasco
2/24, new Delasco (could use a new coil)
R91 v2 Nano - JH - iStick - 1.15Ω
6x 28g @ 1.2o 2.3mm (
7/3 - dry burn coil, torch wick
7/10 - dry burn to change flav
7/17 - dry burn, re-wick w/ melatonin
7/26 - new coil/wick
28g, 5 wraps, 2mm, .85 ohms, Melatonin
7/27 - bunked coil after 3 tanks
Used "just enough" for new wick
And cut 1/2 the ends off
7/28 - new CC wick, ~1/3 of rope
8/1, new CC wick, 1/2 old one was turning color
Coil had a little build up
8/7, coil had mild build up/wick was that funky color
re-wicked w/ KGD
8/12 - Dry Burn, new KGD wick
8/24 - new coil/wick
28g, 6 wraps, 2mm, ~.8 ohms
as much CC as I could, trimmed tails to point
8/25 re wicked w/ KGD, maybe too much CC
was getting burnt hits, 1 tank coil gunking but wick looked good
8/30 new KGD wick - dry hits with old one, tails maybe too thin
1cm not trimmed, was tight in 2mm coil
9/8 - new KGD
9/11 - new coil (old coil was actually 1.5mm)
28g, 7 wraps, 2mm, 1.06 ohms, KGD
9/21, new KGD
9/24, new KGD
9/30, new KKD
10/4, new KGD (early just because)
10/11, new KGD
10/18, new Delasco
10/26 new Delasco
10/29 new coil
28g, 7x, 1.06 ohms, KGD wick
11/7 new KGD
(1 dry hit - burn wick - duh!)
11/8 new KGD - bow tie, trim ≈½ tails
11/10 new KGD, full tails (was getting dry hits)
.... 11/19 new coil
Twisted 32g, 5 spaced wraps, 2mm, 1.15Ω
12/1, new KGD
1/9, new KGD (1/16, coil still clean)
2/14, new Delasco
3/6, new coil
28g, 5x, 2.5mm, 1.1Ω, Delasco
3/20 - new Delasco
4/9 - new Delasco
4/23 - new coil
28g, 2.5mm, 6x, 1.16Ω, Delasco
5/3, new Delasco
6/9, new Delasco
7/14, new Delasco
R91 v2 Nano - POM - SS Workhorse - 1.13Ω
4/9 - New coil, 8x 26g 2.5mm .9o
FD block, no side holes
6/3 new coil 7x 28g 2.3mm 1.3o
(2 wraps tape in post = 2.3mm)
(6x of 28g on 2.3mm = 1.14o
6/4 - cleaned, 7/3 new wick
7/6 - dry burn was tasting burnt
7/20 - dry burn, re-wick w/ Melatonin
7/23 - re-wicked
7/26 - new coil & melatonin wic
28g, 6 wraps, 2mm, 1.01 ohms
7/28 - new CC wick, ~1/3 of rope
8/1, very light coil build up, wick looked great
8/4, coil still looking decent, not much change
8/12, coil still decent
8/18 gunked bad, dry burn new KGD wick
8/22 new KGD 2x coil, wasn't bad but slight yuck taste
9/3 new coil & KGD 8+mm
28g 6 wraps @ .96 ohms
9/8 new KGD
9/21 new KGD
9/24 new KGD
9/30 new coil/wick
28g, 6x, 2mm, .96Ωs
10/4, new KGD (early just because)
10/8, new KGD
10/18, new Delasco
10/22, re-wicked Delasco,
Not leaking
10/29 new coil
28g, 7x, 1.08 ohms, KGD wick
11/7, new KGD
11/15, new KGD
11/24, new KGD
12/12, new Delasco
12/19, new Delasco 2x 20cm double insertion
12/24, new Delasco, 1 piece trimmed close to coil
12/30 New Coil
(7x, 28g, 2.5mm, 1.3Ω)
6x, 28g, spaced, 2.5mm, 1.13Ω, Delasco
1/16 coil still clean, re wicked Delasco,
2/9, new Delasco
2/23, new Delasco
3/21, new Delasco
4/8, new Delasco
4/20, new Delasco
5/3, new coil
28g, 6x, 2.5mm, 1.16Ω, Delasco
5/30, new Delasco
6/25, new Delasco

R91-2.0 - JH - Workhorse @ 1.16Ω
1/7 - 28g, 7x spaced, 2mm, 1.17, KGD
1/28, new Rayon
2/8, new Delasco
2/15, new Delasco
2/23, new Delasco
3/7 new coil
28g, 6x, 2.5mm, spaced, 1.1Ω, Delasco
3/22, new Delasco
4/10, new Delasco
4/21, new Delasco
5/30, new Delasco

================================

Gkmf/Super-T - JH - 1.07 ohms(Mike)
9x 26g w/ ReadyX
7/3 cleaned
8/3 re-wicked w/ CC ~1/2 width
Coil ID btw 2-2.5mm
8/9 new wick KGD
(Previous wick gunked just in the middle)
(Was OK for another day maybe)
8/18 - New KGD wick
8/27 - new coil / wick
28g. 6 open wraps, 2.5mm @ 1.07 ohms
9/3 new KGD @ 1cm
9/12 new KGD
1/9 rinsed clean w/ Everclear
2/16, dry burn, re-wicked w/ Delasco
just twisted and pushed it through w/ a pin - neat

Gkmf/Super-T - JH - 1.6Ω (Janet)
8/28 - 30g. 6 open wraps, 2.5mm @ 1.6Ωs, KGD
9/19 - new KGD wick. juice was dark but coil was fine

F20-350 - JH - 1.20hms
7/26, 28g 8 wraps, 2.5mm @1.2ohms, CC
8/1, coil needed cleaning, new CC wick
8/6, coil gunked on back, stretched coil, new CC wick
9/13 new KGD

F20-490 - Pom -1.1 ohms
8/10 28g, 7 wraps, 2mm, 1.1 ohms, KGD
8/14, new CC wick
9/12 new KGD
9/21 - adjusted post down for better batt contact

================================

ZAP - JH 2.0 ohms
8/13, 28g, 2mm, 10 wraps, 1.7 ohms, CC
9/6, 30g 6 open wraps 2.0 ohms KGD

iGo-#1 - 1.1Ω
8/8 28, 2mm, 8 wraps @1.1Ω
Rayon Wick

Go-#2 - .6Ω
8/12 26, 2mm, 6 wraps @ .6Ω
Rayon Wick

iGo- #1 & #2 rebuilt for DNA40
11/19:
2.5mm ID 12x NI200, 28g=.15Ω, 30g=.22Ω

iGo-Janet - shorty smoke - 1.56Ω
8/8 28g, 2mm, 9wraps @1.5Ω
Rayon Wick

Nautilus - JH
New 6/27, new 7/6, new 9/26 1.8 Bvc
II iClear - POM
New 6/29

DID - ??? - smoke tip - 1.0o
DID Temon - ??? - 1.0o
DID mini - ??? - 1.0o
Cobra - ??? - 1.5o
ZAP - Org/Virginia - 1.7o
5/22 cleaned


Davides
White Tip - Janet's Heaven,
Jan 6, Jan 25, Feb 5, Mar 1
Mar 24, Apr 11, May 5, Jun 2
Black Tip - pomegranate,
Jan 6, Jan 31, Mar 1, Mar 24,
Apr 11, May 4, , Jun 2
Chrome Smooth - Orange Dream
Feb 8, Mar 1
Chrome Groove - USA Blend
Mar 1

Good god man, no.

 

[FlamingoTutu]

Sanguinesolitude, welcome to the porch! Ignore Retired, lol.

Was it here?
Joyetech: Vapor Bank - Evansville, Indiana E-Cigarette Store

Wow, those are a good deal!

This was supposed to be the first giff above, which I can't make show up on that post.

Never mind, not working.

 

[Debadoo]

Thanks Tutu......so glad you didn't have to go through that. I'm fixin to head to bed in a bit

 

[FlamingoTutu]

Thanks Tutu......so glad you didn't have to go through that. I'm fixin to head to bed in a bit

Sleep well, hope you had a great birthday.

Here's a different cat.

 

[3mg Meniere]

Anyone else OCD about tracking their builds.

Topper Log as of 7/14/2015

R91 v1 - Pom - unused @ .93Ω, 5/30, Delasco
R91 v1#2 - JH - Provari - 1.7Ω, 2/24 Delasco
R91 v2 Nano - JH - iStick - 1.16Ω, 7/14 Delasco
R91 v2 Nano - POM - SS Workhorse - 1.16Ω, 5/30, Delasco
R91 2.0 - JH - Workhorse - 1.1Ω, 6/25, Delasco

KFL - Pom Uma @ 1.2Ω 4/21 (5/3 ok)
KFL oem - JH - rDNA @ .14Ω 5/16 KGD
KFL V4 - JH - Nemi @1.2Ω 6/1 Delasco
KFL V4 - Pom - SS Poldiac @1.1Ω 7/2 Delasco
KFL V4 oem - JH -Provari P3 @ 1.43 7/11Delasco

Taifun - POM - Provari-mini, 1.3 ohms, 2/16 Delasco
Taifun2 - Pom - WrkTele - 1.13Ω, 4/31 (or 3/31???)
"
Gkmf/Super-T - JH - 1.07 ohms(Mike), 2/16 Delasco

================================
ErlPrinz (new 5/29/15)

5/29
1st: 28g, 7x, 2.5mm @1.37Ω, Delasco
5/30 new coil
28g, 8x, 2.0mm @ 1.28 ,Delasco, JH

5/29
2nd: 28g, 7x, 2.0mm @1.01Ω, Delasco, POM
6/20, new Delasco

================================
Ego-One on eVic VT
7/10 - new .2Ω Nickel Coil

================================
Janet’s toppers
(temp: 6/21 - blue moved to pink stick)

Kayfun Nano - Janet- JH - iStick-pink 1.3Ω, 7/11
9/6 - new coil
28g, 9 wraps, 2mm @ 1.36 ohms, KGD
9/11 - new KGD
9/30 - new KGD
10/18, dry burn reused KGD
12/12, new KGD
2/1, new Delasco
2/28, new Delasco (lots of gunk, so spaced the coil)
3/28, new Delasco
4/21, new Delasco
5/14, new Delasco, iStick reading 1.5Ω30g, 7x spaced, 2mm, 1.7Ω
6/1, new Delasco, meter=1.45
6/19, new Delasco
7/11, new Delasco

Kayfun Nano - Janet- POM, Provari - 1.7Ω, 7/14
10/7 new coil / KGD
30g, 8x, 2mm, 1.9Ω
10/13 new KGD
11/1 new KGD
12/12 new KGD
1/12 new coil, Delasco
30g, 7x spaced, 2mm, 1.66Ω
2/1, new Delasco
2/28, new coil, Delasco
30g, 7x spaced, 2mm, 1.7Ω
3/30, new Delasco
4/20, new Delasco
5/3, new coil
30g, 7x spaced, 2mm, 1.68Ω, Delasco
6/1, new Delasco
6/19, new Delasco
6/25, new Delasco
7/9, new Delasco
7/14, new Delasco

KFL-Nano - Janet- BB, Mvp @ 1.46Ω, 7/9
3/20 - 1st coil
28g, 6x, 2.5mm, spaced, 1.12Ω
last used @ 1.12Ω 3/20 Delasco
4/8 coil ok, wick turning)
moved to Janet’s inventory - 5/24
5/24 new coil
28g, 8x, 2.5mm, spaced, 1.46Ω
6/1, new Delasco
7/9, new Delasco
Gs-Air (new 5/26)
================================
air-M - POM 5/26

air-MS - JH 5/26

================================
drippers
CTL-slv - JH 10 - .74Ω
10/7 - Dual coil, 28g, 10x, 2mm, .74Ωs
ea coil ~ 1.5Ω, 1cm KGD
12/5 - rebuilt w/ Nickel
3mm, 10wraps, twisted 32, .29Ω
12/7, 8 wraps, twisted now @ .21Ω

CTL-blk - POM 10 - .45Ω
10/7 - Dual coil, 28g, 6x, 2mm, .45Ωs
ea coil ~.1Ω, 1cm KGD

Sub#1 - Janet - JH
2/7 - std head,
30g, 5x, 2.5mm, 1.76 ohms, KGD

Sub#2 - Mike - Pom
2/8 - RBA head
30g, 6x?, 2mm, 1.56 ohms, KGD

================================

Taifun - POM - 1.3 ohms
28g, 2mm, 9 wraps spaced
8/9 wicked w/ KGD
8/10 re-wicked w/ more KGD was leaking
8/15 still flooding, re-wicked w/ KGD @ 10mm strip
8/16 - added some KGD at the ports to
Cut down on flooding out air hole
9/13 new KGD cut flush - no leaking so far (9/16)
11/18 new KGD
2/16, new Delasco

Taifun2 - Pom - WrkTele - 1.13Ω
4/31 - 28g, 2.5mm, 5x 1.13Ω <— 4/31 or 3/31???

KFL - Pom - Uma @ 1.2Ω
3/25 - 1st coil
28g, 6x, 2mm spaced, 1.2Ω
4/21, new Delasco
5/3, still looking good

KFL - JH - rDNA @ .14Ω
5/1 - 1st nickel build
28g nickel, 9x, 3mm @ .14Ω, KGD wick
5/16 - new KGD - lightly gunked, dark wick
(turned off temp, 2 light burns at 14 watts)

KFL V4 - JH - Nemi @1.2Ω
5/22 - new coil
28g, 6x, 2.5mm @1.2Ω Delasco
5/28 - new Delasco
6/1, new Delasco

KFL V4 - Pom - SS Poldiac @1.1Ω
7/2 - new coil
28g, 6x, 2.5mm @1.1Ω Delasco

KFL V4 oem - P3 - JH, @ 1.43 7/11Delasco
6/13 1st coil
28g, 7x, 2.5mm @ 1.43 Delasco
6/20, new Delasco
6/25, new Delasco
7/11, new Delasco

================================

R91 v1 - Pom - unused - @ .93Ω
XC-116 & 28g 7 wraps 3mm @ 1.5Ω
9/4 new coil 28g 8 wraps 1.5mm @ 1.0Ω
9/19 - new KGD wick
10/11, new KGD
Leaking
11/1 new Coil
28g, 7x spaced, 2mm, 1.07Ω, KGD
11/15 - still leaking, tightened block
Wick dis colored but coil not gunked - nice
New KGD wick
11/24, new KGD
12/1, new KGD
12/6, new Delasco
12/12, new Delasco
12/19 new coil
28g, 7x spaced, 2mm, 1.05Ω, Delasco
12/24, new Delasco, 1 piece, left some shoulder
1/12, as above, coil was black no gunk build up
(1/16, check coil, like new yet)
(1/19, coil still looking good, rebuilt anyway)
1/19 new wick & coil - Delasco
5x twisted 30g, spaced, 2.5mm @ .93Ω
2/16, new Delasco
2/24, new Delasco
3/15, new Delasco
4/23, new Delasco
5/6, new Delasco
5/30, new Delasco

R91 v1#2 - JH - Provari - 1.7ohms
8/20, 26g 6wraps 2mm .54 ohms KGD
10/13, 30g, 7x, 2mm, 1.7 ohms, KGD
10/8, new KGD
12/24, space the coil, new Delasco w/ shoulders
(9/1, coil is black but no gunk)
1/16, new Delasco
2/8, new Delasco
2/24, new Delasco (could use a new coil)
R91 v2 Nano - JH - iStick - 1.15Ω
6x 28g @ 1.2o 2.3mm (
7/3 - dry burn coil, torch wick
7/10 - dry burn to change flav
7/17 - dry burn, re-wick w/ melatonin
7/26 - new coil/wick
28g, 5 wraps, 2mm, .85 ohms, Melatonin
7/27 - bunked coil after 3 tanks
Used "just enough" for new wick
And cut 1/2 the ends off
7/28 - new CC wick, ~1/3 of rope
8/1, new CC wick, 1/2 old one was turning color
Coil had a little build up
8/7, coil had mild build up/wick was that funky color
re-wicked w/ KGD
8/12 - Dry Burn, new KGD wick
8/24 - new coil/wick
28g, 6 wraps, 2mm, ~.8 ohms
as much CC as I could, trimmed tails to point
8/25 re wicked w/ KGD, maybe too much CC
was getting burnt hits, 1 tank coil gunking but wick looked good
8/30 new KGD wick - dry hits with old one, tails maybe too thin
1cm not trimmed, was tight in 2mm coil
9/8 - new KGD
9/11 - new coil (old coil was actually 1.5mm)
28g, 7 wraps, 2mm, 1.06 ohms, KGD
9/21, new KGD
9/24, new KGD
9/30, new KKD
10/4, new KGD (early just because)
10/11, new KGD
10/18, new Delasco
10/26 new Delasco
10/29 new coil
28g, 7x, 1.06 ohms, KGD wick
11/7 new KGD
(1 dry hit - burn wick - duh!)
11/8 new KGD - bow tie, trim ≈½ tails
11/10 new KGD, full tails (was getting dry hits)
.... 11/19 new coil
Twisted 32g, 5 spaced wraps, 2mm, 1.15Ω
12/1, new KGD
1/9, new KGD (1/16, coil still clean)
2/14, new Delasco
3/6, new coil
28g, 5x, 2.5mm, 1.1Ω, Delasco
3/20 - new Delasco
4/9 - new Delasco
4/23 - new coil
28g, 2.5mm, 6x, 1.16Ω, Delasco
5/3, new Delasco
6/9, new Delasco
7/14, new Delasco
R91 v2 Nano - POM - SS Workhorse - 1.13Ω
4/9 - New coil, 8x 26g 2.5mm .9o
FD block, no side holes
6/3 new coil 7x 28g 2.3mm 1.3o
(2 wraps tape in post = 2.3mm)
(6x of 28g on 2.3mm = 1.14o
6/4 - cleaned, 7/3 new wick
7/6 - dry burn was tasting burnt
7/20 - dry burn, re-wick w/ Melatonin
7/23 - re-wicked
7/26 - new coil & melatonin wic
28g, 6 wraps, 2mm, 1.01 ohms
7/28 - new CC wick, ~1/3 of rope
8/1, very light coil build up, wick looked great
8/4, coil still looking decent, not much change
8/12, coil still decent
8/18 gunked bad, dry burn new KGD wick
8/22 new KGD 2x coil, wasn't bad but slight yuck taste
9/3 new coil & KGD 8+mm
28g 6 wraps @ .96 ohms
9/8 new KGD
9/21 new KGD
9/24 new KGD
9/30 new coil/wick
28g, 6x, 2mm, .96Ωs
10/4, new KGD (early just because)
10/8, new KGD
10/18, new Delasco
10/22, re-wicked Delasco,
Not leaking
10/29 new coil
28g, 7x, 1.08 ohms, KGD wick
11/7, new KGD
11/15, new KGD
11/24, new KGD
12/12, new Delasco
12/19, new Delasco 2x 20cm double insertion
12/24, new Delasco, 1 piece trimmed close to coil
12/30 New Coil
(7x, 28g, 2.5mm, 1.3Ω)
6x, 28g, spaced, 2.5mm, 1.13Ω, Delasco
1/16 coil still clean, re wicked Delasco,
2/9, new Delasco
2/23, new Delasco
3/21, new Delasco
4/8, new Delasco
4/20, new Delasco
5/3, new coil
28g, 6x, 2.5mm, 1.16Ω, Delasco
5/30, new Delasco
6/25, new Delasco

R91-2.0 - JH - Workhorse @ 1.16Ω
1/7 - 28g, 7x spaced, 2mm, 1.17, KGD
1/28, new Rayon
2/8, new Delasco
2/15, new Delasco
2/23, new Delasco
3/7 new coil
28g, 6x, 2.5mm, spaced, 1.1Ω, Delasco
3/22, new Delasco
4/10, new Delasco
4/21, new Delasco
5/30, new Delasco

================================

Gkmf/Super-T - JH - 1.07 ohms(Mike)
9x 26g w/ ReadyX
7/3 cleaned
8/3 re-wicked w/ CC ~1/2 width
Coil ID btw 2-2.5mm
8/9 new wick KGD
(Previous wick gunked just in the middle)
(Was OK for another day maybe)
8/18 - New KGD wick
8/27 - new coil / wick
28g. 6 open wraps, 2.5mm @ 1.07 ohms
9/3 new KGD @ 1cm
9/12 new KGD
1/9 rinsed clean w/ Everclear
2/16, dry burn, re-wicked w/ Delasco
just twisted and pushed it through w/ a pin - neat

Gkmf/Super-T - JH - 1.6Ω (Janet)
8/28 - 30g. 6 open wraps, 2.5mm @ 1.6Ωs, KGD
9/19 - new KGD wick. juice was dark but coil was fine

F20-350 - JH - 1.20hms
7/26, 28g 8 wraps, 2.5mm @1.2ohms, CC
8/1, coil needed cleaning, new CC wick
8/6, coil gunked on back, stretched coil, new CC wick
9/13 new KGD

F20-490 - Pom -1.1 ohms
8/10 28g, 7 wraps, 2mm, 1.1 ohms, KGD
8/14, new CC wick
9/12 new KGD
9/21 - adjusted post down for better batt contact

================================

ZAP - JH 2.0 ohms
8/13, 28g, 2mm, 10 wraps, 1.7 ohms, CC
9/6, 30g 6 open wraps 2.0 ohms KGD

iGo-#1 - 1.1Ω
8/8 28, 2mm, 8 wraps @1.1Ω
Rayon Wick

Go-#2 - .6Ω
8/12 26, 2mm, 6 wraps @ .6Ω
Rayon Wick

iGo- #1 & #2 rebuilt for DNA40
11/19:
2.5mm ID 12x NI200, 28g=.15Ω, 30g=.22Ω

iGo-Janet - shorty smoke - 1.56Ω
8/8 28g, 2mm, 9wraps @1.5Ω
Rayon Wick

Nautilus - JH
New 6/27, new 7/6, new 9/26 1.8 Bvc
II iClear - POM
New 6/29

DID - ??? - smoke tip - 1.0o
DID Temon - ??? - 1.0o
DID mini - ??? - 1.0o
Cobra - ??? - 1.5o
ZAP - Org/Virginia - 1.7o
5/22 cleaned


Davides
White Tip - Janet's Heaven,
Jan 6, Jan 25, Feb 5, Mar 1
Mar 24, Apr 11, May 5, Jun 2
Black Tip - pomegranate,
Jan 6, Jan 31, Mar 1, Mar 24,
Apr 11, May 4, , Jun 2
Chrome Smooth - Orange Dream
Feb 8, Mar 1
Chrome Groove - USA Blend
Mar 1

OCD much????

 

[Robert Cromwell]

Anyone else OCD about tracking their builds.

My build has been going a bit downhill for years.

 

[Robert Cromwell]

Anyone else OCD about tracking their builds.

Topper Log as of 7/14/2015

R91 v1 - Pom - unused @ .93Ω, 5/30, Delasco
R91 v1#2 - JH - Provari - 1.7Ω, 2/24 Delasco
R91 v2 Nano - JH - iStick - 1.16Ω, 7/14 Delasco
R91 v2 Nano - POM - SS Workhorse - 1.16Ω, 5/30, Delasco
R91 2.0 - JH - Workhorse - 1.1Ω, 6/25, Delasco

KFL - Pom Uma @ 1.2Ω 4/21 (5/3 ok)
KFL oem - JH - rDNA @ .14Ω 5/16 KGD
KFL V4 - JH - Nemi @1.2Ω 6/1 Delasco
KFL V4 - Pom - SS Poldiac @1.1Ω 7/2 Delasco
KFL V4 oem - JH -Provari P3 @ 1.43 7/11Delasco

Taifun - POM - Provari-mini, 1.3 ohms, 2/16 Delasco
Taifun2 - Pom - WrkTele - 1.13Ω, 4/31 (or 3/31???)
"
Gkmf/Super-T - JH - 1.07 ohms(Mike), 2/16 Delasco

================================
ErlPrinz (new 5/29/15)

5/29
1st: 28g, 7x, 2.5mm @1.37Ω, Delasco
5/30 new coil
28g, 8x, 2.0mm @ 1.28 ,Delasco, JH

5/29
2nd: 28g, 7x, 2.0mm @1.01Ω, Delasco, POM
6/20, new Delasco

================================
Ego-One on eVic VT
7/10 - new .2Ω Nickel Coil

================================
Janet’s toppers
(temp: 6/21 - blue moved to pink stick)

Kayfun Nano - Janet- JH - iStick-pink 1.3Ω, 7/11
9/6 - new coil
28g, 9 wraps, 2mm @ 1.36 ohms, KGD
9/11 - new KGD
9/30 - new KGD
10/18, dry burn reused KGD
12/12, new KGD
2/1, new Delasco
2/28, new Delasco (lots of gunk, so spaced the coil)
3/28, new Delasco
4/21, new Delasco
5/14, new Delasco, iStick reading 1.5Ω30g, 7x spaced, 2mm, 1.7Ω
6/1, new Delasco, meter=1.45
6/19, new Delasco
7/11, new Delasco

Kayfun Nano - Janet- POM, Provari - 1.7Ω, 7/14
10/7 new coil / KGD
30g, 8x, 2mm, 1.9Ω
10/13 new KGD
11/1 new KGD
12/12 new KGD
1/12 new coil, Delasco
30g, 7x spaced, 2mm, 1.66Ω
2/1, new Delasco
2/28, new coil, Delasco
30g, 7x spaced, 2mm, 1.7Ω
3/30, new Delasco
4/20, new Delasco
5/3, new coil
30g, 7x spaced, 2mm, 1.68Ω, Delasco
6/1, new Delasco
6/19, new Delasco
6/25, new Delasco
7/9, new Delasco
7/14, new Delasco

KFL-Nano - Janet- BB, Mvp @ 1.46Ω, 7/9
3/20 - 1st coil
28g, 6x, 2.5mm, spaced, 1.12Ω
last used @ 1.12Ω 3/20 Delasco
4/8 coil ok, wick turning)
moved to Janet’s inventory - 5/24
5/24 new coil
28g, 8x, 2.5mm, spaced, 1.46Ω
6/1, new Delasco
7/9, new Delasco
Gs-Air (new 5/26)
================================
air-M - POM 5/26

air-MS - JH 5/26

================================
drippers
CTL-slv - JH 10 - .74Ω
10/7 - Dual coil, 28g, 10x, 2mm, .74Ωs
ea coil ~ 1.5Ω, 1cm KGD
12/5 - rebuilt w/ Nickel
3mm, 10wraps, twisted 32, .29Ω
12/7, 8 wraps, twisted now @ .21Ω

CTL-blk - POM 10 - .45Ω
10/7 - Dual coil, 28g, 6x, 2mm, .45Ωs
ea coil ~.1Ω, 1cm KGD

Sub#1 - Janet - JH
2/7 - std head,
30g, 5x, 2.5mm, 1.76 ohms, KGD

Sub#2 - Mike - Pom
2/8 - RBA head
30g, 6x?, 2mm, 1.56 ohms, KGD

================================

Taifun - POM - 1.3 ohms
28g, 2mm, 9 wraps spaced
8/9 wicked w/ KGD
8/10 re-wicked w/ more KGD was leaking
8/15 still flooding, re-wicked w/ KGD @ 10mm strip
8/16 - added some KGD at the ports to
Cut down on flooding out air hole
9/13 new KGD cut flush - no leaking so far (9/16)
11/18 new KGD
2/16, new Delasco

Taifun2 - Pom - WrkTele - 1.13Ω
4/31 - 28g, 2.5mm, 5x 1.13Ω <— 4/31 or 3/31???

KFL - Pom - Uma @ 1.2Ω
3/25 - 1st coil
28g, 6x, 2mm spaced, 1.2Ω
4/21, new Delasco
5/3, still looking good

KFL - JH - rDNA @ .14Ω
5/1 - 1st nickel build
28g nickel, 9x, 3mm @ .14Ω, KGD wick
5/16 - new KGD - lightly gunked, dark wick
(turned off temp, 2 light burns at 14 watts)

KFL V4 - JH - Nemi @1.2Ω
5/22 - new coil
28g, 6x, 2.5mm @1.2Ω Delasco
5/28 - new Delasco
6/1, new Delasco

KFL V4 - Pom - SS Poldiac @1.1Ω
7/2 - new coil
28g, 6x, 2.5mm @1.1Ω Delasco

KFL V4 oem - P3 - JH, @ 1.43 7/11Delasco
6/13 1st coil
28g, 7x, 2.5mm @ 1.43 Delasco
6/20, new Delasco
6/25, new Delasco
7/11, new Delasco

================================

R91 v1 - Pom - unused - @ .93Ω
XC-116 & 28g 7 wraps 3mm @ 1.5Ω
9/4 new coil 28g 8 wraps 1.5mm @ 1.0Ω
9/19 - new KGD wick
10/11, new KGD
Leaking
11/1 new Coil
28g, 7x spaced, 2mm, 1.07Ω, KGD
11/15 - still leaking, tightened block
Wick dis colored but coil not gunked - nice
New KGD wick
11/24, new KGD
12/1, new KGD
12/6, new Delasco
12/12, new Delasco
12/19 new coil
28g, 7x spaced, 2mm, 1.05Ω, Delasco
12/24, new Delasco, 1 piece, left some shoulder
1/12, as above, coil was black no gunk build up
(1/16, check coil, like new yet)
(1/19, coil still looking good, rebuilt anyway)
1/19 new wick & coil - Delasco
5x twisted 30g, spaced, 2.5mm @ .93Ω
2/16, new Delasco
2/24, new Delasco
3/15, new Delasco
4/23, new Delasco
5/6, new Delasco
5/30, new Delasco

R91 v1#2 - JH - Provari - 1.7ohms
8/20, 26g 6wraps 2mm .54 ohms KGD
10/13, 30g, 7x, 2mm, 1.7 ohms, KGD
10/8, new KGD
12/24, space the coil, new Delasco w/ shoulders
(9/1, coil is black but no gunk)
1/16, new Delasco
2/8, new Delasco
2/24, new Delasco (could use a new coil)
R91 v2 Nano - JH - iStick - 1.15Ω
6x 28g @ 1.2o 2.3mm (
7/3 - dry burn coil, torch wick
7/10 - dry burn to change flav
7/17 - dry burn, re-wick w/ melatonin
7/26 - new coil/wick
28g, 5 wraps, 2mm, .85 ohms, Melatonin
7/27 - bunked coil after 3 tanks
Used "just enough" for new wick
And cut 1/2 the ends off
7/28 - new CC wick, ~1/3 of rope
8/1, new CC wick, 1/2 old one was turning color
Coil had a little build up
8/7, coil had mild build up/wick was that funky color
re-wicked w/ KGD
8/12 - Dry Burn, new KGD wick
8/24 - new coil/wick
28g, 6 wraps, 2mm, ~.8 ohms
as much CC as I could, trimmed tails to point
8/25 re wicked w/ KGD, maybe too much CC
was getting burnt hits, 1 tank coil gunking but wick looked good
8/30 new KGD wick - dry hits with old one, tails maybe too thin
1cm not trimmed, was tight in 2mm coil
9/8 - new KGD
9/11 - new coil (old coil was actually 1.5mm)
28g, 7 wraps, 2mm, 1.06 ohms, KGD
9/21, new KGD
9/24, new KGD
9/30, new KKD
10/4, new KGD (early just because)
10/11, new KGD
10/18, new Delasco
10/26 new Delasco
10/29 new coil
28g, 7x, 1.06 ohms, KGD wick
11/7 new KGD
(1 dry hit - burn wick - duh!)
11/8 new KGD - bow tie, trim ≈½ tails
11/10 new KGD, full tails (was getting dry hits)
.... 11/19 new coil
Twisted 32g, 5 spaced wraps, 2mm, 1.15Ω
12/1, new KGD
1/9, new KGD (1/16, coil still clean)
2/14, new Delasco
3/6, new coil
28g, 5x, 2.5mm, 1.1Ω, Delasco
3/20 - new Delasco
4/9 - new Delasco
4/23 - new coil
28g, 2.5mm, 6x, 1.16Ω, Delasco
5/3, new Delasco
6/9, new Delasco
7/14, new Delasco
R91 v2 Nano - POM - SS Workhorse - 1.13Ω
4/9 - New coil, 8x 26g 2.5mm .9o
FD block, no side holes
6/3 new coil 7x 28g 2.3mm 1.3o
(2 wraps tape in post = 2.3mm)
(6x of 28g on 2.3mm = 1.14o
6/4 - cleaned, 7/3 new wick
7/6 - dry burn was tasting burnt
7/20 - dry burn, re-wick w/ Melatonin
7/23 - re-wicked
7/26 - new coil & melatonin wic
28g, 6 wraps, 2mm, 1.01 ohms
7/28 - new CC wick, ~1/3 of rope
8/1, very light coil build up, wick looked great
8/4, coil still looking decent, not much change
8/12, coil still decent
8/18 gunked bad, dry burn new KGD wick
8/22 new KGD 2x coil, wasn't bad but slight yuck taste
9/3 new coil & KGD 8+mm
28g 6 wraps @ .96 ohms
9/8 new KGD
9/21 new KGD
9/24 new KGD
9/30 new coil/wick
28g, 6x, 2mm, .96Ωs
10/4, new KGD (early just because)
10/8, new KGD
10/18, new Delasco
10/22, re-wicked Delasco,
Not leaking
10/29 new coil
28g, 7x, 1.08 ohms, KGD wick
11/7, new KGD
11/15, new KGD
11/24, new KGD
12/12, new Delasco
12/19, new Delasco 2x 20cm double insertion
12/24, new Delasco, 1 piece trimmed close to coil
12/30 New Coil
(7x, 28g, 2.5mm, 1.3Ω)
6x, 28g, spaced, 2.5mm, 1.13Ω, Delasco
1/16 coil still clean, re wicked Delasco,
2/9, new Delasco
2/23, new Delasco
3/21, new Delasco
4/8, new Delasco
4/20, new Delasco
5/3, new coil
28g, 6x, 2.5mm, 1.16Ω, Delasco
5/30, new Delasco
6/25, new Delasco

R91-2.0 - JH - Workhorse @ 1.16Ω
1/7 - 28g, 7x spaced, 2mm, 1.17, KGD
1/28, new Rayon
2/8, new Delasco
2/15, new Delasco
2/23, new Delasco
3/7 new coil
28g, 6x, 2.5mm, spaced, 1.1Ω, Delasco
3/22, new Delasco
4/10, new Delasco
4/21, new Delasco
5/30, new Delasco

================================

Gkmf/Super-T - JH - 1.07 ohms(Mike)
9x 26g w/ ReadyX
7/3 cleaned
8/3 re-wicked w/ CC ~1/2 width
Coil ID btw 2-2.5mm
8/9 new wick KGD
(Previous wick gunked just in the middle)
(Was OK for another day maybe)
8/18 - New KGD wick
8/27 - new coil / wick
28g. 6 open wraps, 2.5mm @ 1.07 ohms
9/3 new KGD @ 1cm
9/12 new KGD
1/9 rinsed clean w/ Everclear
2/16, dry burn, re-wicked w/ Delasco
just twisted and pushed it through w/ a pin - neat

Gkmf/Super-T - JH - 1.6Ω (Janet)
8/28 - 30g. 6 open wraps, 2.5mm @ 1.6Ωs, KGD
9/19 - new KGD wick. juice was dark but coil was fine

F20-350 - JH - 1.20hms
7/26, 28g 8 wraps, 2.5mm @1.2ohms, CC
8/1, coil needed cleaning, new CC wick
8/6, coil gunked on back, stretched coil, new CC wick
9/13 new KGD

F20-490 - Pom -1.1 ohms
8/10 28g, 7 wraps, 2mm, 1.1 ohms, KGD
8/14, new CC wick
9/12 new KGD
9/21 - adjusted post down for better batt contact

================================

ZAP - JH 2.0 ohms
8/13, 28g, 2mm, 10 wraps, 1.7 ohms, CC
9/6, 30g 6 open wraps 2.0 ohms KGD

iGo-#1 - 1.1Ω
8/8 28, 2mm, 8 wraps @1.1Ω
Rayon Wick

Go-#2 - .6Ω
8/12 26, 2mm, 6 wraps @ .6Ω
Rayon Wick

iGo- #1 & #2 rebuilt for DNA40
11/19:
2.5mm ID 12x NI200, 28g=.15Ω, 30g=.22Ω

iGo-Janet - shorty smoke - 1.56Ω
8/8 28g, 2mm, 9wraps @1.5Ω
Rayon Wick

Nautilus - JH
New 6/27, new 7/6, new 9/26 1.8 Bvc
II iClear - POM
New 6/29

DID - ??? - smoke tip - 1.0o
DID Temon - ??? - 1.0o
DID mini - ??? - 1.0o
Cobra - ??? - 1.5o
ZAP - Org/Virginia - 1.7o
5/22 cleaned


Davides
White Tip - Janet's Heaven,
Jan 6, Jan 25, Feb 5, Mar 1
Mar 24, Apr 11, May 5, Jun 2
Black Tip - pomegranate,
Jan 6, Jan 31, Mar 1, Mar 24,
Apr 11, May 4, , Jun 2
Chrome Smooth - Orange Dream
Feb 8, Mar 1
Chrome Groove - USA Blend
Mar 1

Umm no.... I don't even keep that much info for taxes.