Older Folks and Vaping

[MikeE3]

Mike.....Just one yiddle error there.........zmax... either smoke or sigelei can't be used with just one 18350. You can use two of them stacked or a single 18650. There is a mini zmax on the way, but not available yet that uses an 18350, as well as a telescope zmax coming that will use ???, that info isn't available yet...just pictures

Thanks for keeping me honest yiddle - I edited my post. See what happens when ya talk about something you don't own.

 

[Janet H]

The end table on my side of the couch.

Nice photo with the light and shadow. Our tables may look messy, but at least there are no ashes all over the place!

 

[Kat56]

The end table on my side of the couch.

Wowzie!!! I likey!

 

[Old Curmudgeon]

The end table on my side of the couch.

Green with envy over here. Nice collection.
I'm about ready to get box like the one on the right.

 

[MikeE3]

Green with envy over here. Nice collection.
I'm about ready to get box like the one on the right.

Thanks.

The Gripper is a nice light-weight VV box mod. Just be aware of it's short-comings I pointed out a few posts back. I put an eGo adapter in the 510-connection and an eGo cone sleeve over that. It protects the fragile threads and gives more support to the native 510 connection that can work loose after awhile.

 

[WallyO]

Thanks.

The Gripper is a nice light-weight VV box mod. Just be aware of it's short-comings I pointed out a few posts back. I put an eGo adapter in the 510-connection and an eGo cone sleeve over that. It protects the fragile threads and gives more support to the native 510 connection that can work loose after awhile.

Mike, they have an updated version coming soon. Don't know if they improved the connector yet. GV calls it the Groove. Don't know if that will be the name for all vendors but it will be varable wattage. Woo-hoo. Hopefully they will be showing up before the Chinese holiday. I love the feel of the gripper and hope the Groove follows suit.

 

[X P3 Flight Engineer]

Mike, they have an updated version coming soon. Don't know if they improved the connector yet. GV calls it the Groove. Don't know if that will be the name for all vendors but it will be varable wattage. Woo-hoo. Hopefully they will be showing up before the Chinese holiday. I love the feel of the gripper and hope the Groove follows suit.

The Chinese New Year Holiday is the 10th to 24th of February this year. It usually disrupts vendors orders for a month or more with the backlog it creates. Vapers should be stocked up on the essentials now so that this doesn't affect them. I'm sure some vendors are better stocked than others to cover this period but it all hinges on demand, so plan ahead.

 

[WallyO]

The Chinese New Year Holiday is the 10th to 24th of February this year. It usually disrupts vendors orders for a month or more with the backlog it creates. Vapers should be stocked up on the essentials now so that this doesn't affect them. I'm sure some vendors are better stocked than others to cover this period but it all hinges on demand, so plan ahead.

I probably have enough of everything to last through two Chinese New Years. And yet...I keep buying.

 

[X P3 Flight Engineer]

I probably have enough of everything to last through two Chinese New Years. And yet...I keep buying.

My last order was the 20th of August! I also had a 2 year supply of nic base and now I have lowered my nic and sometimes go a week or more on no-nic so I have no idea when I may need more.

Want more? Oh, Yeah!
I can't wait to see what new stuff will come out this year. Last year was revolutionary for the industry. Products are so much better now! Keep em coming!

 

[yiddleboge6]

Thanks for keeping me honest yiddle - I edited my post. See what happens when ya talk about something you don't own.

Awwww......I hated to even say anything, 'cause you know so much more than I do about most of this vaping stuff. Love {{{{you and Janet}}}}

Great pictures!! Is that stand one that you made?

 

[Constance Shutts]

The holder for the batteries caught my eye. Showed it to my husband since he's a woodworker. I want one, so soon as these frigid temp's abate I'm going plead for him to make me one....

Just noticed the one on the right holding the carts...need that too. He's going to be busy

 

[Ken62]

My Vision Vivi Nova will be here before the end of the week, woohoo!!!

My favorite vape is cinnamon red hots at about 4%. Do you think I'll be OK with it?

 

[BacsiBob]

Two 18650 VV PV's that don't get a lot of attention: The XL3 XL2 Battery - Black and the Apollo VTube
Single Apollo VTube. The VTube can be discounted 30% using coupon code vtube30.

I use the XL3 in the 18650 size and the 18350 mini. It's what use most often. I got the VTube in the mini size and use it every so often. It's real purdy (black).

 

[Janet H]

The holder for the batteries caught my eye. Showed it to my husband since he's a woodworker. I want one, so soon as these frigid temp's abate I'm going plead for him to make me one....

Just noticed the one on the right holding the carts...need that too. He's going to be busy

He made one of the wood holders for me too and I love it, but that was back when I was only using the eGos. Now we both have larger devices so he'll have to make the holes bigger. I actually think a 2-tiered one would be good to hold tanks and devices. It keeps things nicely organized. Mike is storing a drill press for a friend so he took advantage of it for the holes and I'm sure your hubby could fancy up the edges pretty easily - your own custom made piece of PV furniture!

 

[flintlock62]

I need a stand for my nicotine base. You think he would have a suggestion? I'm afraid I may tip the jar when the top is off.

He made one of the wood holders for me too and I love it, but that was back when I was only using the eGos. Now we both have larger devices so he'll have to make the holes bigger. I actually think a 2-tiered one would be good to hold tanks and devices. It keeps things nicely organized. Mike is storing a drill press for a friend so he took advantage of it for the holes and I'm sure your hubby could fancy up the edges pretty easily - your own custom made piece of PV furniture!

 

[X P3 Flight Engineer]

My Vision Vivi Nova will be here before the end of the week, woohoo!!!

My favorite vape is cinnamon red hots at about 4%. Do you think I'll be OK with it?

You might want to throw that in a metal tank rather than the plastic, from what I hear. I don't use any cinnamon so I don't speak from experience, but the metal tanks are available (in colors!).

 

[WallyO]

You might want to throw that in a metal tank rather than the plastic, from what I hear. I don't use any cinnamon so I don't speak from experience, but the metal tanks are available (in colors!).

You forgot to mention to make sure it's all metal. Not the metal sheathed plastic.

 

[MikeE3]

Mike, they have an updated version coming soon. Don't know if they improved the connector yet. GV calls it the Groove. Don't know if that will be the name for all vendors but it will be varable wattage. Woo-hoo. Hopefully they will be showing up before the Chinese holiday. I love the feel of the gripper and hope the Groove follows suit.

Yeah, I saw pictures and a description of it. It has a big built in battery - not sure how I feel about a PV that doesn't have a replaceable battery. Will it still hold a reasonable charge after a years worth of re-charging?

I need a stand for my nicotine base. You think he would have a suggestion? I'm afraid I may tip the jar when the top is off.

hmmm! Have to give that one a 'think'.

Awwww......I hated to even say anything, 'cause you know so much more than I do about most of this vaping stuff. Love {{{{you and Janet}}}}

Great pictures!! Is that stand one that you made?

yep it is. In the shadows are a couple stands/holders just for tanks.

 

[FranC]

Nice stands Mike!!

 

[Janet H]

I need a stand for my nicotine base. You think he would have a suggestion? I'm afraid I may tip the jar when the top is off.

I have a small box that the bottle fits in - a square bottom seems to be a little more stable. Also, I try to cap all my bottles before continuing with mixing to avoid knocking one over. I also try to do my mixing when I'm not distracted by other things to make sure I'm focused on what I'm doing - of course I'm easily distracted so that doesn't always work, but I try. A good reason for me to work with smaller bottles is so if I do knock one over I won't be spilling much.

In the DIY thread it was recommended to work on a tray so if some does spill it won't go all over the place.

Hope that helps.