I think it should be an option, same with the tip as I don't like them and would swap it out as soon as I got it. I like tight draws.
I would be more than happy to take it off your hands if it comes down to it
PDIB's Making MODs!
- Thread starter pdib
- Start date
- th_trl_thread_readers 0
- Status
I would be more than happy to take it off your hands if it comes down to it
I would be more than happy to take it off your hands if it comes down to it
Just the tip?
Sent from my iPhone using Tapatalk
Last edited:
Assuming it's copper colored and will patina like the copper ground plate on a dibi, let me think...
One Million Dollars!
Actually, that's still a fair amount of money. So maybe not that much. But if it were available, I'd buy it, and I wouldn't quibble over the price.
My guess is those with a copper plate will want it included and those with an aluminum plate won't. Since I have one of each, I could go either way.
Depends what said delrin drip tip looks like. I'm also in the camp of: That's all I use on a dripper or bottom feeder 'cause metal gets too hot, but unlike the sleeve, it's not like they can't be found anywhere else.
Bryan, thank you for that pm! It certainly turned on the light bulb! I'll do everything I can. I can't make any promises though, but rest assured that if not in this version, it's going to be on the next one. Subject to Pdib's approval of course!
... sooo I need some honest answers, ok?
How much are you guys willing to pay for a brass sleeve? ( I know people call it "copper" but I want to be clear that a true copper sleeve will be too soft ).
Would you guys like the brass sleeve included or as a separate option?
Would you guys like a delrin drip tip included?
I really like hearing all you suggestions and recommendations bec. I would like us to have something we can truly call our own. Please bear in mind though, that when something goes into production, It simply isn't feasible to make something if only a few people are interested in it. So if you all want a "copper" sleeve then comment and LIKE THIS POST
I don't really care for the "copper" sleeve. But, if both are included I wouldn't complain. LOL. Must have driptip.
Ok, so MKR likes it tight, B2L is greedy, and Rossum goes both ways... Did I miss anyone?
ROFL, sorry, couldn't help it folks!
Sent from my iPhone using Tapatalk
ROFL, sorry, couldn't help it folks!
Sent from my iPhone using Tapatalk
I'm a fan of simple elegance and minimalistic look. But I am always open to ideas / suggestions. This is what I have so far.
Here's the Delrin tip I recommend:
http://www.avidvaper.com/ultra-wide-bore-15mm-black-delrin-drip-tip/
Here it is in action on the OliveR in the foreground. I've since replaced all my tips with it
http://www.avidvaper.com/ultra-wide-bore-15mm-black-delrin-drip-tip/
Here it is in action on the OliveR in the foreground. I've since replaced all my tips with it
Last edited:
this is funny beeeee-cause . . . .. . drip tips are interchangeable, cheap, ubiquitous, and multiply like rabbits. Not a big issue, I should think. If one is included, great. If not, I think I can find one. Try finding an aftermarket copper (brass) AFC sleeve that fits this atty . . . .. . . . .
g'head . . .. . I'm waiting . . . .. . .
Right. So the priority in our thinking right now should be the one item that we either speak up about, and make a solid decision about now, or never. If I had to make a judgement call, I'd say 30-40% of people would really like a copper (brass) sleeve, and 15% would forego the atty because it doesn't match. 60% the peeps with OliveRdibi mods will have copper (generous est.). So, 1/4 (25%) of 60 is 15. Let's make 15 copper (brass) sleeves for every 100 atties, unless the cost exceeds $20. Make sense?
sorry, just thinking out loud.
g'head . . .. . I'm waiting . . . .. . .
Right. So the priority in our thinking right now should be the one item that we either speak up about, and make a solid decision about now, or never. If I had to make a judgement call, I'd say 30-40% of people would really like a copper (brass) sleeve, and 15% would forego the atty because it doesn't match. 60% the peeps with OliveRdibi mods will have copper (generous est.). So, 1/4 (25%) of 60 is 15. Let's make 15 copper (brass) sleeves for every 100 atties, unless the cost exceeds $20. Make sense?
sorry, just thinking out loud.
Edit: deleted my post because pdib's made too much sense.
Sent from my Galaxy Note 3 via Tapatalk.
Sent from my Galaxy Note 3 via Tapatalk.
Last edited:
I'm a fan of simple elegance and minimalistic look. But I am always open to ideas / suggestions. This is what I have so far.
I think I like something like ↑ that better than "pips". (as long is we're turning this into a public discussion)
btw: I too prefer minimalismisticism; however, I know for a fact that there's "matchy" peeps in our group.
this is funny beeeee-cause . . . .. . drip tips are interchangeable, cheap, ubiquitous, and multiply like rabbits. Not a big issue, I should think. If one is included, great. If not, I think I can find one. Try finding an aftermarket copper (brass) AFC sleeve that fits this atty . . . .. . . . .
g'head . . .. . I'm waiting . . . .. . .
Right. So the priority in our thinking right now should be the one item that we either speak up about, and make a solid decision about now, or never. If I had to make a judgement call, I'd say 30-40% of people would really like a copper (brass) sleeve, and 15% would forego the atty because it doesn't match. 60% the peeps with OliveRdibi mods will have copper (generous est.). So, 1/4 (25%) of 60 is 15. Let's make 15 copper (brass) sleeves for every 100 atties, unless the cost exceeds $20. Make sense?
sorry, just thinking out loud.
... too early in the morning here for all that math!
Just tell me now if you want one or not and I'll make it happen!
Give her a Delrin coffee stir stick style straw
Just the tip!
Sent from my iPhone using Tapatalk
That would work...
I would definitely be in for a copper sleeve. Even if it were added as an option I don't think you would sell many without it. I get the feeling that this group wants all the "bells and whistles." We sure aren't here for cheap mods.... sooo I need some honest answers, ok?
How much are you guys willing to pay for a brass sleeve? ( I know people call it "copper" but I want to be clear that a true copper sleeve will be too soft ).
Would you guys like the brass sleeve included or as a separate option?
Would you guys like a delrin drip tip included?
I really like hearing all you suggestions and recommendations bec. I would like us to have something we can truly call our own. Please bear in mind though, that when something goes into production, It simply isn't feasible to make something if only a few people are interested in it. So if you all want a "copper" sleeve then comment and LIKE THIS POST
For my wood on my upcoming Dibi and my Walnut both look better with the SS sleeve and the metal on my current and future ones will be SS so no need for copper/brass for me.
*whines* But that would make it $2's more!!!! This is where we buy the .25 cents mod, isn't it???
- Status
Similar threads
