Picture of Your Setup Part 3!

[Falconeer]

While Kanger brought affordable squonking to the masses they certainly weren't shy about saying who done it - just about every surface has either their name or logo on it and just in case the user should forget what he or she is vaping it even says Drip mod on the top surface!
It came with a spare build deck and a pre coiled and wicked atomiser each taking two coils giving a resistence of 0.4 ohms and OMG if you used it as issued, it spat like a firecracker.

I tamed it by making a single 0.9 Ohm single coil with a very small ID fitted between the posts and running it with the airflow about a quarter open.

 

[cocy c]

While Kanger brought affordable squonking to the masses they certainly weren't shy about saying who done it - just about every surface has either their name or logo on it and just in case the user should forget what he or she is vaping it even says Drip Mod on the top surface!
It came with a spare build deck and a pre coiled and wicked atomiser each taking two coils giving a resistence of 0.4 ohms and OMG if you used it as issued, it spat like a firecracker.

I tamed it by making a single 0.9 Ohm single coil with a very small ID fitted between the posts and running it with the airflow about a quarter open.

View attachment 929761 View attachment 929763 View attachment 929765 View attachment 929767

Nice build 1,0 Ohm or there abouts is best for Battery life IMPO! I am thinking of going with mech all the way have some nice one and also squonkers. Have you seen the adapter for the tub like mechs.

 

[AngeNZ]

Dvarw DL on a Mixx

 

[badinfluence357]

Lately I've been having some really bad luck with my mods. I dont know if its a sign for me to stop buying cheep mods or give up vaping altogether. Its so frustrating, now I have four mods down. Two sxk bbs, one superleggra sl clone, and now the para-nomore...You would think they would secure the tube with screws or threading from the inside but nope, its glue and supposedly press fitted. Dont over tighten you caps.

Sent from my SM-G950U1 using Tapatalk

 

[Falconeer]

Nice build 1,0 Ohm or there abouts is best for Battery life IMPO! I am thinking of going with mech all the way have some nice one and also squonkers. Have you seen the adapter for the tub like mechs.View attachment 929805View attachment 929811

I haven't seen these in the UK ... but two years ago in Spain the vape shops had them both in B&Ms and online - at the time I thought - "That's a true engineer's solution" - i.e. inelegant but it'd work.

Agreed about coils around 1.0 Ohm and battery life - the one I did in my pic was an experiment to see if I could fit one in that way and now I know it can be done and it'll work and kill the spitback I'll do another to fit better around the 1.2 ohm mark making sure again that I get both legs coming out at the top of the coil which IMPO goes a long long way to kill spitback.

On the going mech front - I'm in a sorta similar frame of mind. I left my watch collection in Dunoon because i thought I'd be back within 10 days max - but since 22/11/20 I've happily worked with my old quartz Seiko SQ 100; also a lot of folks managed with just their Reos for years - so I thought I'd try playing about with the simple Kanger Drip box and see how I got on. The mod's good, the attie not quite so much so but I'm getting there and have other ideas yet to try....

 

[Daniel Forsyth]

Marvelous

 

[cocy c]

I haven't seen these in the UK ... but two years ago in Spain the vape shops had them both in B&Ms and online - at the time I thought - "That's a true engineer's solution" - i.e. inelegant but it'd work.

Agreed about coils around 1.0 Ohm and battery life - the one I did in my pic was an experiment to see if I could fit one in that way and now I know it can be done and it'll work and kill the spitback I'll do another to fit better around the 1.2 ohm mark making sure again that I get both legs coming out at the top of the coil which IMPO goes a long long way to kill spitback.

On the going mech front - I'm in a sorta similar frame of mind. I left my watch collection in Dunoon because i thought I'd be back within 10 days max - but since 22/11/20 I've happily worked with my old quartz Seiko SQ 100; also a lot of folks managed with just their Reos for years - so I thought I'd try playing about with the simple Kanger Drip box and see how I got on. The mod's good, the attie not quite so much so but I'm getting there and have other ideas yet to try....

This is the squonker that has lots of gimmicks takes a bit to master.

 

[Falconeer]

You'll all be fed up seeing this small neat setup, and I'll not post it again, I promise, but I'm working on what used to be often given as advice to new vapers on ECF when I joined - basically it was, don't be constantly chasing the "best" but work on getting the best out of the kit you have.

The inelegant experimental coil is doing a grand job, the wick has bedded in and there's no spitback. The wide open drip tip which can't be replaced isn't what I'd have chosen in an ideal world but by adjusting my tecnique it's proved pretty satisfactory. Battery life is excellent - I'm on day 2 with it.

 

[Spydro]

... I am thinking of going with mech all the way have some nice one and also squonkers. Have you seen the adapter for the tub like mechs.View attachment 929805View attachment 929811

I started out almost 100% with mech tube mods, used them over the years along with other gear, then ended the last years running 99% mech squonk mods (mostly 35 Reo's).

Interesting concept for the tube mechs... the ability to add squonk to them.

I always ran Geek Vape Avocado RDTA's on my VGOD. They added an ample juice supply for it rather than having to drip the VGOD RDA that came with it.

 

[Daniel Forsyth]

My little Good Wood Cool Custom mod

 

[DPLongo22]

Mismatched reds, but I don't care...

That could be a song.

 

[bsidb]

My little Good Wood Cool Custom mod
View attachment 929977

nice clear pic also

 

[Daniel Forsyth]

nice clear pic also

I'm glad I could put up a clear pic for you

 

[Daniel Forsyth]

My Magnificent Mother of Pearl Beast

 

[AngeNZ]

Juggerknot Mini RTA on a Lost Vape Grus

 

[cocy c]

 

[Daniel Forsyth]

The Big Beautiful Gorgeous Good Wood, 250 of finest DNA's

 

[Tralfaz]

Terk V2 on my Purge Truck and some awesome peanut butter and strawbery jam.

 

[Daniel Forsyth]

 

[Tralfaz]

Drop Solo on my Lost Vape Therion BF and some pretty decent vanilla custard.