- Status
Mundy's 4-turn Z-coil on the chalice
Talk about wrestling an alligator!
Sent from the zoo using Tapatypo 2
Talk about wrestling an alligator!
Sent from the zoo using Tapatypo 2
You pro'ly know this XObox, so I'm not talking to you 
Anyway, the Mundy's is like lead if you give it a very light torching. I usually wrap it on a jig, then pinch the legs with my fingers, slide it off and give it a visit at the torch office. (so, light, in fact, that I just hold the legs with my fingers, about 3/8" from the coil). After that, it's easy to shape and stays exactly where you put it. . . . ..
like this
Anyway, the Mundy's is like lead if you give it a very light torching. I usually wrap it on a jig, then pinch the legs with my fingers, slide it off and give it a visit at the torch office. (so, light, in fact, that I just hold the legs with my fingers, about 3/8" from the coil). After that, it's easy to shape and stays exactly where you put it. . . . ..
like this
This isn't that fancy, but it's the first time I tried cotton instead of ekowool for the wick-hat. It's working grrrrrreat!
This is my Storm Rider clone, using three wraps of 28 gauge kanthal and stainless steel mesh. It's about 0.6 Ohms.
This is my Storm Rider clone, using three wraps of 28 gauge kanthal and stainless steel mesh. It's about 0.6 Ohms.
I was feeling sorry for my poor unused RSST last night and decided to try this:
5 wraps of MM for 1.08ohms.
Cotton u-wick long enough to hang half way into the tank.
Yummy, yummy, yummy!
You can really taste the crunk in the Crunkberry
Master of Bassets...and not much else.
5 wraps of MM for 1.08ohms.
Cotton u-wick long enough to hang half way into the tank.
Yummy, yummy, yummy!
You can really taste the crunk in the Crunkberry
Master of Bassets...and not much else.
I use cotton in all my gennys never disappoints me
Sent from my HTCONE using Tapatalk
Well, haven't gotten around to a straight cotton build for any of my genesis attys, but I did use cotton as a hat on my Prometheus clone rebuild.
Ugly as sin, since the cotton got all bunched up when I did the kanthal wrap, but it works really really well!
Used one of those little rubber plugs that come with the RSST to make refilling easier.
ACTION!
Ugly as sin, since the cotton got all bunched up when I did the kanthal wrap, but it works really really well!
Used one of those little rubber plugs that come with the RSST to make refilling easier.
ACTION!
Traded my Romuluz genesis hybrid for an authentic Squape. First bottom-coil RBA for me unless you count the Fogger. Wrapped two 2mm strands of silica with 6 wraps of kanthal and got a nice 1.5 ohms.
Single coil 24g (micro .55 ID 10/11 wrap) meters at about .35-.4Ω Dual 24g sounds extremely dangerous.
Not trying to play mother goose, but what did you meter that build at? What batteries are you using? Do you want to blow yourself up? Will you leave your mods to me in your will?
Dual 32 ga. micro coils on a fatty v2. Not gonna lie this took me about an hour to get right and I'm still not too impressed. It meters out to 1 ohm. And after testing about 5 different coil and wick configurations my head is spinning.... I think I'm done for the night!
Why yes I did Mother Goose. My first build was a dual coil 10 wrap 24g and it metered out to .5 on my Fluke 88 multimeter and ohm meter. I rebuilt it since it too way too long to warm up. As for batteries? All I run are these things. I have migrant workers making these in my garage.
Let me guess, you are in the "sub ohm is too dangerous" crowd?
Not in the least. I typically run in the .4-.6 range.
Looking at the pics you posted, the number of turns, and not knowing/guessing the ID of your coils there, and being quite familiar with the wire... I would have estimated that build in the .15-.2ohm range.
Lastly, where can I find migrant battery makers that are trustworthy? The last ones I had drank all my beer and refused to shower.
-Mother Goose
Sent from the zoo using Tapatypo 2
Last edited:
I really can't help but think, "WHY" would someone need to vape something @58.8w????????????? I can't even imagine vaping @ 20w... I understand that battery makers are catching on to the growing trend today, but 58.8w!!! You have to have a massively huge nicotine buzz going on after that... I still think anything under .5Ω is pushing the envelope, and god willing nothing happens to anyone while going lower. I just feel our next tragedy in vaping is going to come in the near future and am bracing for it.... Fingers crossed nothing happens!!!
- Status
Similar threads
