Post pictures of your working wick and coil setup

[pdib]

This is my favorite build. 26g 7/8 wraps. It doesn't affect my flavor, but would there be a reason one coil is gunky and thick with junk and the other is rockin clean? This build has been heavily vaped for about 12 hours.

I'm guessing it's cause the side with only 7 wraps gets a lot hotter than the side with 8 wraps.

 

[Tbev]

Lol! Nice catch pdib!

Sent from my Transformer TF101 using Tapatalk

 

[Cloud Junky]

This is my setup .6 ohm dual coils quad twisted 32ga kanthal on cotton

 

[jonny45378]

This is my setup .6 ohm dual coils quad twisted 32ga kanthal on cotton

View attachment 324374

View attachment 324375

How are you liking your big nasty? My friend just got his last week and is loving it.

Sent from my myTouch_4G_Slide using Tapatalk 2

 

[SLIPPY_EEL]

2 strand twisted 0.30 Nichrome
3mm id
8wraps
0.6Ω
the taste is vgood

 

[BIG CL0UDS]

22 gauge dual coil 3/4 wrap on a 1/8th bit Rockin the TugBoat Ohms came in at .125

 

[Tbev]

That nemi looks dope, you just torch it?

Sent from my Transformer TF101 using Tapatalk

 

[BIG CL0UDS]

That nemi looks dope, you just torch it?

Sent from my Transformer TF101 using Tapatalk

Yea i torched it. It came out pretty good. It's like a dark brown/grey with hints of blue and almost green. Tried it on a rda and it came out bright purple lol.

 

[Tbev]

Sweet, I got a good deal on a brass nemi, I think it's ugly as hell do in going to Chem dip it and try to get some cool color patina going, I hope it looks close to as good as yours.

Sent from my Transformer TF101 using Tapatalk

 

[BIG CL0UDS]

Sweet, I got a good deal on a brass nemi, I think it's ugly as hell do in going to Chem dip it and try to get some cool color patina going, I hope it looks close to as good as yours.

Sent from my Transformer TF101 using Tapatalk

Cool man. This was a brushed stainless that I torched. There is a facebook group called Patina Mods that has some cool pics and a files section that has a few good tutorials on how to do the patina process. Best of luck...

 

[vapero]

I've been really happy with my rdas and cottonballs for the last 6 months but today I got the itch to try some cotton yarn, what do you guys think of it? not good, ok, or don't bother?

 

[IIKEVOII]

I bought some of the peaches and cream used it once after i boiled it and trashed it. Wasnt for me.

 

[havok333]

I've been really happy with my rdas and cottonballs for the last 6 months but today I got the itch to try some cotton yarn, what do you guys think of it? not good, ok, or don't bother?

Used it for months rebuilding Vivi Novas and it would great. Tried it on an RDA a couple months ago and it just didn't wick fast enough to keep up with my microcoils (1.0 - 1.3 ohm range).

Sent from my XT1049 using Tapatalk

 

[Tbev]

I run cotton yarn in lots of gennys, it's great.

Sent from my Transformer TF101 using Tapatalk

 

[havok333]

I run cotton yarn in lots of gennys, it's great.

Sent from my Transformer TF101 using Tapatalk

Would you mind terribly showing pic of good wicking yarn on a genny? I'd love to see a good way to set this up.

Sent from my XT1049 using Tapatalk

 

[Tbev]

I have a couple different sized screwdrivers that were included with attys, and I use one of them to wrap on any coil will work I'm sure, I use a piece of wire to fish the yarn thru the coil and leave an extra inch in the tank so I could pull it up and snip off every so often.

I like that wick with duals works pretty good I'll post more pics in a few.

 

[havok333]

I have a couple different sized screwdrivers that were included with attys, and I use one of them to wrap on any coil will work I'm sure, I use a piece of wire to fish the yarn thru the coil and leave an extra inch in the tank so I could pull it up and snip off every so often.

I like that wick with duals works pretty good I'll post more pics in a few.

Looks like a pretty straightforward u-wick setup. I did a similar build months ago (single coil) and the yarn wouldn't wick vertically for anything. Maybe it's due to the heavy VG juice I vape.

Thanks for the pics, maybe I'll try again this weekend and thin down some juice to see if that works. To be fair, I can't get cotton balls to wick vertically either, and have been using SS rope for over a year in gennies.

Sent from my XT1049 using Tapatalk

 

[LReyes66]

Sent from my Nexus 5

 

[Tbev]

I have 5gennys set up single twisted 28ga @ 0.5 0hm and they all wick fine. I'll post more pics in the morning. Here's stove with cotton

 

[jonny45378]

Just built this a few minutes ago. Dual 26g 7 wrap coils that came out at around .6 ohms each (using my mvp as a ohm meter so its not to exact on the ohms) so around .3 ohms. Hits real good and produces good vape. This is one of the lowest I've built so far she the heat isn't too bad.



Sent from my myTouch_4G_Slide using Tapatalk 2