Post pictures of your working wick and coil setup

[TheKiwi]

Dual 26g, 10/9, 3mmID, .2 to .3ohms. Intense flavor.

The resistance doesn't seem right given your specs... My 6 wraps 3/32 26ga gives me 0.6 to 0.7 ohms.

Checked on steam engine, and it says you'll need 4 wraps each to get 0.2 to 0.3 ohms too at 3mm id

EDIT: unless you're not using kanthal..?


Burping out loud using Tapatalk

 

[vapero]

Hi guys I need your guidance!

I've been building for almost two years, my go to coils are
orchid with dual 28g at .4-.5ohms
rogue with dual 24g at .2-.3ohms
quasar single 24g at .4-.5ohms
origen rda dual 28g or 26g at .4-.5ohms

but latelly I've been thinking of trying ribbon but have no idea where to start based on my likes what would you recomend

 

[vapero]

this thread has gone quiet... sssshhh don't want to wake up the coilers

 

[USMCotaku]

I've yet to use ribbon, so I'm no help there
I went straight from regular macro/micro singles and duals to things like Claptons and stovetops, which are my vape nirvana, so feel no need to try more
Sent with one hand, the other is busy vaping.

 

[zipflint]

It's no masterpiece, but it works for me. Just a vertical coil in a 454 clone.
454 build by zipflint, on Flickr
454 atty vapor by zipflint, on Flickr

 

[WharfRat1976]

The resistance doesn't seem right given your specs... My 6 wraps 3/32 26ga gives me 0.6 to 0.7 ohms.

Checked on steam engine, and it says you'll need 4 wraps each to get 0.2 to 0.3 ohms too at 3mm id

EDIT: unless you're not using kanthal..?


Burping out loud using Tapatalk

Nichrome 60. Sorry I did not specify. I have a Klein MM 100 multi do my readings so pretty spot on.

 

[WharfRat1976]

Lil Lemo build for my custards, ohms out at 1.0 using 26g Nichrome 60. A tasty lil beast at 25 watts wicked with my beloved KGD.

 

[TinyDeyo]

Twisted 28g comes to .3, wicked with organic Japanese cotton tastes great at 55 watts

Sent from my LGL75C using Tapatalk 2

 

[TheBigE]

26 gauge - 9 wraps - .093" diameter - .67 Ohms







I'm really enjoying this setup in my new Vulcan with about 27 watts.

 

[Fegbri]

I found my favorite build on my Kanger Subtank Mini. Tiger wire (28g with ribbon) around 3/32, 5/6 wraps, .8 ohms, wicked with KGD. The flavor is amazing, and the 80vg juice I'm using actually produces nice clouds at only 20 watts. I am happy!!

 

[deedupdex]

Coiler or weaver?

Fire clip guys!

Little fire clip. So many questions about how it actually vapes and fires. Surprisingly very well. Still playing with different wicking. Its warm but with an adjustable airflow its completely controllable. Dm me if you want to see some clouds from it. Damn happy with the turnout and especially with the vape. Remember to practice safe building and know your hardware. Ask questions if you are unsure. There are thousands of us willing to take the time to help ANYONE out! Enjoy and happy friday vapefam.

 

[USMCotaku]

I'd call that one the Celtic knot
Sent with one hand, the other is busy vaping.

 

[deedupdex]

Running at .6ohms 24G
Development stages of this "Spinal" heating element on the HAZE by @vhousa @vapeheadorigins Its messy I know but I'm going to try and develop this spinal looking type heating element and see what I can do with it. Please bear with me as I feel rusty building again haha. If you have questions as to why it doesn't short, go check out my previous older builds about techniques and oxidation coating on builds such as the swan, crowsfoot and you coils. Long story short, you build up oxidation by pulsing and hardening procedures. Also annealing prebending wires. Equal heat distribution is also an after product of the annealing wire process which relieves internal stress which helps with equal heat and current distribution throughout the whole wire regardless of bends. Thanks for looking hopefully I can share whatever else I come up with with this thing. Hate it of love it thanks for looking.

 

[SLIPPY_EEL]

thats the 3rd post on it... ... that i know of

 

[vapero]

got the itch to make a parallel 24g coil so took the stillare v3 cone out, it was gathering dust, had to remove one of the neg screws to make the coil fit and gave a bit of a bent to the coil so it would have better airflow , parallel to the wall. great vape at .22 ohms!

 

[whosrandy]

Sadly can't remember what I have here. Half of a zipper coil parallel with something else... a helix I believe of some kind. .25 ohm dual coil, 2mm. Love it.

Sent from my SM-G900V using Tapatalk

 

[MCCOY300]

For this week, I tried out a new flavor build in single coil. 10 wraps of 28ga 2 wire parallel single coil.

 

[USMCotaku]

Just rebuilt my ST mini rba
Made a Clapton using 28 & 32 gauge kanthal. 5 wraps on 2.5 mm, wicked with Japanese organic cotton, using Frederick's fred Brule juice, cut with vg to 90/10. So far no dry hits, wicking great, flavor great at 25 watts....

Sent with one hand, the other is busy vaping.

 

[USMCotaku]

Forgot the glow pic
Sent with one hand, the other is busy vaping.

 

[Uncletattoowhat]

Nice Clapton! I may have to tear out my twisted 28ga that has been in for most of my tank's life and throw in a fused Clapton i have left over from my build the other night in my derringer.