- Status
Very nice idea and execution, but I thought you weren't supposed to dry burn ni200?
Everybody has theories. I don't call it dry burning. I think of it more like sanitizing. Have you ever seen wire under a microscope? It will meltdown if you go overboard.
My 24g gplat fused clapton with 34g ka1 and wrapped parallel with 24g gplat. 3mm inner diameter. Tried to dual it, but the single came out to .18 ohms and I really only like using my sigelei 150w mod. The rda is this interesting mutation clone I found. It's pretty nifty, minus having to tighten that screw all the time.
Quick questions: why does your Sigelei 150w say Sigelei on the side? Mine doesn't. And how much may I ask is the mutation x clone, when the authentic is like 20 bucks?
My 24g gplat fused clapton with 34g ka1 and wrapped parallel with 24g gplat. 3mm inner diameter. Tried to dual it, but the single came out to .18 ohms and I really only like using my Sigelei 150w mod. The RDA is this interesting mutation clone I found. It's pretty nifty, minus having to tighten that screw all the time.
Sent from my iPhone using Tapatalk
I'm not sure why mine does, could just be a different version of it. The mutation clone was like 12 bucks.
I've seen one like that in a post before.
I call this The Cloud Machine... Two flattened Claptons Fused together. I vape at 120w... I takes a lot of power to get it going.
View media item 428573View media item 428572View media item 428574
View media item 428573View media item 428572View media item 428574
ive enjoyed many a vape on my Airek's, but i do away with the airflow control and use a chuff on top which makes the chamber quite a bit smaller, greatly improving the flav, and you can also then turn the middle part of the topcap(the barrel part) upside down if you need less flow or and less leak from they monster holes, the only thing i was upset with with mine though was the post holes just being a normal size and the center posts on mine being clones span when tighten to much and even moving up and down lol apart from that and shorting a battery with one they aint to bad.
My fav at the mo is the Velocity, i still use the twisted messes and dogex but the velocity is an absolute dream to build on, no need to bend legs or scrunch/distort coils to get em in the deck and the barrel/top cap doesnt run into the deck atall like a lot of rda's out there, i managed to get a pair of standard stapled staggered fused claptons in, on top of that it seems to have plenty of range on airflow which can even be completly closed
My fav at the mo is the Velocity, i still use the twisted messes and dogex but the velocity is an absolute dream to build on, no need to bend legs or scrunch/distort coils to get em in the deck and the barrel/top cap doesnt run into the deck atall like a lot of rda's out there, i managed to get a pair of standard stapled staggered fused claptons in, on top of that it seems to have plenty of range on airflow which can even be completly closed
My Lemo 2, Fused Clapton 
Core was 26AWG NiChrome80 wrapped with 37AWG Kanthal, and it came out at 0.3ohm!
Core was 26AWG NiChrome80 wrapped with 37AWG Kanthal, and it came out at 0.3ohm!
28/34ga Continuous staggered fused clapton. 4/3 wraps on 2.5mm, 0.18Ω Fast ramp on a mech, great flavor and vapor.
My Lemo 2, Fused Clapton
Core was 26AWG NiChrome80 wrapped with 37AWG Kanthal, and it came out at 0.3ohm!
Very nice build. Those fused are real tight... It takes a lot of skill to get Claptons that tight.
How do you like the Lemo 2... I'm a bit disappointed with mine. It doesn't produce much flavor... even with the titanium.
Last edited:
I made this TC build for my IPV4 and I am real impressed how it came out. Over the last couple years I've probably made at 1000 coils... but I've never seen one that glow Orange and Yellow. I Fused Titanium and Ni200 and it came out wonderfully. The flavor this throws is the best I've had so far. BTW the Velocity RDA is boss... easiest RDA to build that I own.
Last edited:
Very nice build... a beautiful coil. You should check out the Velocity RDA clone... I think you would appreciate it for those type of builds.
Super neat job, and Hello! I love to watch your videos on YouTube. I am happy tonite with my coil, for the first time ever, the wick is right finally.
Rolled cotton wick on hornet.
Shot thru cyberspace with my iGun
One of my favorite builds... Parallel Staged Heating Fused Claptons. 2.4mm ID on a Petri Dotmod RDA Clone. Fused Clapton, 28g 317L / 36g Kanthal, and Clapton 24g Nichrome 80 / 30g Kanthal.
Clouds for days and a flavor monster!
Clouds for days and a flavor monster!
- Status
Similar threads
