Rebuildable Tank Atomizers - An Anthology, Pictorial, Builds and Reviews.

[dems86]

Wasn't there mention of the 7th?

Not that I know of...this is Pete's last post in the UTA thread on UKV


"We're getting there. The machinist is waiting on the positive and negative posts which should be here sometime this week. Once those have arrived he can mill the holes they fit into in the deck sections and then there's not too much to do apart from assemble them "

 

[Mtek]

Wasn't there mention of the 7th?

I don't know, I'm not a member of other forums

 

[Grrrr]

On UKV

Richard46 wrote:
"My money is on Tuesday week, that is the 7th April any takers?"
PeteC copied that post and added
"Am I allowed to bet? HeHe!"

Perhaps I'm reading too much into that but it seems to me that Pete is saying the 7th is a good bet.

 

[dems86]

On UKV

Richard46 wrote:
"My money is on Tuesday week, that is the 7th April any takers?"
PeteC copied that post and added
"Am I allowed to bet? HeHe!"

Perhaps I'm reading too much into that but it seems to me that Pete is saying the 7th is a good bet.

Oh, I don't know, didn't even cross my mind that Pete was implying the 7th with that post, but if you are right, props


...I hope you are right

 

[Grrrr]

I guess we'll find out soon enough.....

 

[dems86]

I guess we'll find out soon enough.....

...but I wanna know now, waaaahhhh wahhhhh

 

[qorax]

1)What mod is that Q?

Another quick question, 2)is the draw similar to that of a Spheroid?

3)Lastly, how often do you rock your A-T? I'm pretty sure I would really like it, but I can be noncommittal at times

BTW, it looks like 4)the G16 with AFC has a smooth top cap, and the regular one is notched. Do you own a G16 with AFC, can you confirm?

Not to answer for Q, but that's an aged brass JM16 I beleive...it's sweet.

I want to hear about the Aiolos too.

1) Mtek is correct, it is the JM16 Aged Brass.
2) Aiolos-T is airier than the Spheroid. I can do DTLs on it (the way I vape lately).
3) I mostly carry 14xxx devices out-of-home. And they are either topped with a Spheroid, Aiolos-T, Euforia or the K'fun-Mini.
4) Yes, the G16 with AFC has a flat topcap.

 

[roxynoodle]

Question: does the A-t require a mod with afc?

 

[qorax]

Question: does the A-t require a mod with afc?

No. However, since it's air inlets are at the base (not on it's 510 thankfully!) you'd still need a mod which has slots cut onto it's topcap, just like the Spheroid.

 

[dems86]

No. However, since it's air inlets are at the base (not on it's 510 thankfully!) you'd still need a mod which has slots cut onto it's topcap, just like the Spheroid.

Oh, so then I would want to pick up the regular AFC-less G16 for the A-T since it needs the slots?

 

[roxynoodle]

No. However, since it's air inlets are at the base (not on it's 510 thankfully!) you'd still need a mod which has slots cut onto it's topcap, just like the Spheroid.

I'm good to go then

And the Tile is working well on a Stingray X with its af in the 510.

 

[anavidfan]

Update on my little Mini-Atty by Chels, its up and running, got the part today...... Its an amazing little 16mm atty..... Taste is great and runs great with my yucky NETs...... I missed it and Im glad I decided to give it another chance..... I was really angry with the whole waiting and waiting but its really nice....... I forgive Chels...... BUT I wont forget......

[/URL][/IMG]

 

[dems86]

Update on my little Mini-Atty by Chels, its up and running, got the part today...... Its an amazing little 16mm atty..... Taste is great and runs great with my yucky NETs...... I missed it and Im glad I decided to give it another chance..... I was really angry with the whole waiting and waiting but its really nice....... I forgive Chels...... BUT I wont forget......

[/URL][/IMG]

Nice, you'll be able to give us a good comparison of three 16mm attys soon.

 

[anavidfan]

Yes, I hope the Aiolos T is even better. but this is pretty darn nice, taste and clouds and air is equal to the the Spheroid, if not maybe a bit more air and larger clouds , even at 1.3 ohms.

 

[jhhollier]

I hate to bring up an RDA again but since you're talking about the Mini Atty, have you tried the Mini or Micro Drip?

 

[anavidfan]

I was going to get it, but no one had one to give opinions, and as far as I know, people are still waiting for their mini drip to ship? Its a long wait, and If like me you have a problem, which Im sure there wont be, its a long wait for replacement parts and I did not have a very good experience with their after care......

 

[dems86]

I was going to get it, but no one had one to give opinions, and as far as I know, people are still waiting for their mini drip to ship? Its a long wait, and if like me you have a problem, which Im sure there wont be its a long wait for replacement parts and I did not have a very good experience with their after care......

Is there a specific reason why it is such a long wait? Terrible shipping method? Made to order?

I was looking at the mini atty the other day. My Piccoloid love has me hunting 16mm mods and attys


Piccoloid has been my most rewarding purchase in a while, just blew me away

 

[anavidfan]

I think its mostly the way it is when shipping from Israel...... I was told that I was a lucky one to have gotten my "wrong" parts in less than a month....... Part of it is I think they dont reach deadlines.........But thats just my speculation. Even before it ships its about a week or 2.....

Most of all, even if the shipping were terrible, I did not like how they replied to my concerns about the problem I had with my insulator melting...... Maybe because Im female, it was rather rude and presumptuous for them to assume that my skills in building was at newbie level...... When a Modder automatically assumes you dont know what you are doing, its not a good example of good customer service..... From what others were telling me , they had a problem with early insulators not being up to spec with the temps people use.... They did upgrade the insulators to PEEK from whatever they were using before....

 

[dems86]

I think its mostly the way it is when shipping from Israel...... I was told that I was a lucky one to have gotten my "wrong" parts in less than a month....... Part of it is I think they dont reach deadlines.........But thats just my speculation. Even before it ships its about a week or 2.....

Most of all, even if the shipping were terrible, I did not like how they replied to my concerns about the problem I had with my insulator melting...... Maybe because Im female, it was rather rude and presumptuous for them to assume that my skills in building was at newbie level...... When a Modder automatically assumes you dont know what you are doing, its not a good example of good customer service..... From what others were telling me , they had a problem with early insulators not being up to spec with the temps people use.... They did upgrade the insulators to PEEK from whatever they were using before....

Well, when it comes to how women are viewed in that part of the world, it's still like the stone age in certain places. Although, I would think Israel would be better, but I really have no idea

Yeah, id they have had problems with insulators in the past you would think jumping to conclusions about the user's skills wouldn't be the first thought that popped to mind.

That's just nuts about the delay in just shipping it out, not to mention the amount of time in transit, geez Louis.

 

[anavidfan]

Yep, It is a damn good little atty. Using disgusting all VG NETs is a good test, even with the best of atomizers..... I love my Odys, but they just dont keep up the ALL VG dirty NETs...... The Penelope was even worse..... So far this little Mini is keeping up and taste is staying pretty consistent, I think Ive almost emptied the 2ml tank....

I have not tried my NETs on the Phenom, scared to stink it up.......

Has anyone used VG TRUE NETs on their Flash-e V3? I just wonder how it would do with my gross tobaccos....... If the mesh has to be adjusted for flow and if the coil doesnt get covered in black crust before that giant tank empties....